Ticiane Cestari Fagundes

In vivo Dentin Remineralization by Calcium-phosphate Cement

Minimally invasive caries-removal procedures remove only caries-infected dentin and preserve caries-affected dentin that becomes remineralized. Dental cements containing calcium phosphate promote remineralization. This study evaluated the in vivo remineralization capacity of resin-based calcium-phosphate cement (Ca-P) used for indirect pulp-capping. Carious and sound teeth indicated for extraction were randomly restored with the Ca-P base or without base (control), followed by adhesive restoration. Study teeth were extracted after three months, followed by elemental analysis of the cavity floor. Mineral content of affected or sound dentin at the cavity floor was quantified by electron probe micro-analysis to 100-μm depth. After three months, caries-affected dentin underneath the Ca-P base showed significantly increased calcium and phosphorus content to a depth of 30 μm. Mineral content of treated caries-affected dentin was in the range of healthy dentin, revealing the capacity of Ca-P base to promote remineralization of caries-affected dentin.

Compressive and diametral tensile strength of glass ionomer cements

The aim of this study was to compare, in different periods of time, the compressive and diametral tensile strength of a traditional high viscous glass ionomer cement: Fuji IX (GC Corporation), with two new Brazilian GICs: Vitro-Molar (DFL) and Bioglass R (Biodinamica), all indicated for the Atraumatic Restorative Treatment (ART) technique. Fifteen disk specimens (6.0mm diameter x 3.0mm height) for the diametral tensile strength (DTS) test and fifteen cylindrical specimens (6.0mm diameter x 12.0mm height) for the compressive strength (CS) test were made of each GIC. Specimens were stored in deionized water at 37º C and 100% of humidity in a stove until testing. Five specimens of each GIC were submitted to CS and DTS test in each period, namely 1 hour, 24 hours and 7 days. The specimens were tested in a testing machine (Emic) at a crosshead speed of 1.0mm/min for CS and 0.5mm/min for the DTS test until failure occurred. The data were submitted to two-way ANOVA and Tukey tests (alpha=0.05). The mean CS values ranged from 42.03 to 155.47MPa and means DTS from 5.54 to 13.72 MPa, with test periods from 1h to 7 days. The CS and DTS tests showed no statistically significant difference between Fuji IX and Vitro Molar, except for CS test at 1-hour period. Bioglass R had lowest mean value for CS of the cements tested. In DTS test Bioglass R presented no statistically significant differences when compared with all others tested GICs at 1-hour period and Bioglass R presented no difference at 24-hour and 7-day periods when compared to Vitro-Molar. Further studies to investigate other physical properties such as fracture toughness and wear resistance, as well as chemical composition and biocompatibility, are now needed to better understand the properties of these new Brazilian GICs.

Differential bonds degradation of two resin-modified glass-ionomer cements in primary and permanent teeth

OBJECTIVES To evaluate the effect of chemical degradation on bond strength of resin-modified glass-ionomer cements bonded to primary and permanent dentin. METHODS Class I cavities of permanent and primary extracted human molars were restored with two resin-modified glass-ionomer cements: Fuji II LC and Vitremer, and stored in water for 24h. Half samples were immersed in 10% NaOCl aqueous solution for 5h. Teeth were sectioned into beams and tested for microtensile bond strengths. Results were analyzed with multiple ANOVA and Tukeys tests (p<0.05). Analysis of debonded surfaces was performed by SEM. RESULTS 24h bond strengths for Vitremer and Fuji II LC were similar. For Fuji II, bond strength values were higher for primary than for permanent dentin. Vitremer bond strength was similar for both. Chemical degradation did not affect Fuji II LC bond strength to dentin. However, decreases in bond strength were found for Vitremer groups after NaOCl immersion. Signs of glass ionomer-dentin interaction were evident by SEM analysis for Fuji II LC specimens. CONCLUSIONS Vitremer and Fuji II presented similar bond strength at 24. Vitremer dentin bonds were prone to chemical degradation. Fuji II LC-dentin bonds showed typical features of glass-ionomer dentin interaction at the bonded interfaces, and were resistant to in vitro degradation.

Microabrasion in tooth enamel discoloration defects: three cases with long-term follow-ups

Superficial irregularities and certain intrinsic stains on the dental enamel surfaces can be resolved by enamel microabrasion, however, treatment for such defects need to be confined to the outermost regions of the enamel surface. Dental bleaching and resin-based composite repair are also often useful for certain situations for tooth color corrections. This article presented and discussed the indications and limitations of enamel microabrasion treatment. Three case reports treated by enamel microabrasion were also presented after 11, 20 and 23 years of follow-ups.

Indirect pulp treatment in a permanent molar: case reort of 4-year follow-up

This case report describes the Indirect Pulp Treatment (IPT) of deep caries lesion in a permanent molar. A 16-year-old male patient reported discomfort associated with thermal stimulation on the permanent mandibular left first molar. The radiographs revealed a deep distal caries lesion, very close to the pulp, absence of radiolucencies in the periapical region, and absence of periodontal space thickening. Pulp sensitivity was confirmed by thermal pulp vitality tests. Based on the main complaint and the clinical and radiographic examinations, the treatment plan was established to preserve pulp vitality. Clinical procedures consisted of removing the infected dentin and lining the caries-affected dentin with calcium hydroxide paste. The tooth was provisionally sealed for approximately 60 days. After this period, tooth vitality was confirmed, the remaining carious dentin was removed, and the tooth was restored. At 4-year follow-up, no clinical or radiographic pathological findings were found.

Transferring ART research into education in Brazil.

ABSTRACT The aim of this study was to evaluate the teaching of the Atraumatic Restorative Treatment (ART) approach in Brazilian dental schools. Materials and Methods: A questionnaire on this subject was sent to Pediatric Dentistry, Operative Dentistry and Public Health Dentistry professors. The questions approached the followig subjects: the method used to teach ART, the time spent on its teaching, under which discipline it is taught, for how many years ART has been taught and its effect on the DMFT index. Results: A total of 70 out of 202 dental schools returned the questionnaire. The ART approach is taught in the majority of the Brazilian dental schools (96.3%), and in most of these schools it is taught both in theory and in clinical practice (62.9%). The majority (35.3%) of professors teach ART for 8 hours, and most often as part of the Pediatric Dentistry discipline (67.6%). It has been taught for the last 7 to 10 years in 34.3% of dental schools. Most professors did not observe a change in the DMFT index with this approach. There is a diversity in the teaching of ART in Brazil in terms of the number of hours spent, the teaching method (theory and practice), and the disciplines involved in its teaching. Conclusions: It is necessary to address the training of professors in the ART approach for the whole country. An educational model is proposed whereby a standard ART module features as part of other preventive and restorative caries care educational modules. This will facilitate and standardize the introduction and adoption of the ART approach in undergraduate education in Brazil.

A novel bioactive agent improves adhesion of resin-modified glass-ionomer to dentin

Bioactive glasses are surface-active and able to induce remineralization of dentin. Two resin-modified glass-ionomer cements (RMGICs) doped with bioactive glass (Biosilicate®) were used as restorative materials in dentin. Experimental powders were made by incorporating 2, 5, and 10 wt% of Biosilicate® in Vitremer® (VT) and Fuji II LC® (FL) powders. Commercial FL and VT were used as control materials. Six cylinders of each material were tested for failure in compression (1.0 mm/min), after 24 h storage in distilled water at 37 °C. For microtensile bond strength (MTBS) test, cavity preparations were performed on 30 noncarious human molars and restored with the tested materials. Teeth were stored in water (37 °C) for 24 h or 7 days, sectioned into beams and tested for failure in tension (0.5 mm/min). Data were analyzed by analysis of variance and multiple-comparison tests (p < 0.05). Analysis of debonded specimens was performed by scanning electron microscopy. Only incorporation of 2 wt% of Biosilicate® did not decrease compressive strength of the RMGICs. Two weight percent of Biosilicate® into RMGICs produced an increase in MTBS after 24 h for FL and after 24 h and 7 days for VT. Two weight percent of Biosilicate® particles into RMGICs did not affect compressive strength and improved MTBS to dentin.

Efficacy of auxiliary devices for removal of fluorescent residue after bracket debonding

OBJECTIVE To evaluate four protocols for removal of fluorescent materials after bracket debonding. MATERIALS AND METHODS Resin removal from 40 bovine enamel surfaces was performed according to groups (n = 10): conventional (C), white LED (W), LED that evidenced fluorescence (F), and fluorescent lens (FL). The following analyses were performed: sample thickness, superficial area of resin residue, and areas of resin residue or worn enamel in depth. ANOVA and Tukey tests were used to analyze sample thickness (P ≤ .05). Area measurements were analyzed by Kruskal-Wallis and Dunns tests (P ≤ .05). RESULTS The FL group showed the highest reduction in enamel thickness. F group final thickness was similar to that of other groups. The largest superficial areas of resin residue were found for the C and W groups, while the FL group had the greatest removal of resin residue. The C group exhibited the largest area in depth of resin residue. The FL and F groups exhibited the most loss of enamel with the least amount of resin residue; in contrast, the C and W groups presented the fewest areas of worn enamel and the most areas of resin residue. CONCLUSION Auxiliary devices were useful for removal of fluorescent residue after bracket debonding.

Effect of Dental Pigmentation Intensity on the Transenamel and Transdentinal Penetration of Hydrogen Peroxide

Abastract This study aimed to evaluate the transenamel and transdentinal penetration of hydrogen peroxide (H202) applied to bovine teeth pigmented with black tea at different intensities. The following groups were formed DW: immersion in distilled water; BT100: immersion in an infusion of 1.6 g of black tea per 100 mL distilled water; BT10: immersion in an infusion of 1.6 g black tea per 10 mL distilled water. All groups were immersed for 6 days. To quantify the penetration of H202, the specimens were placed in artificial pulp chambers (APCs) and subjected to bleaching treatment with 38% H2O2 once per week for 3 weeks. After bleaching treatment, the acetate buffer solution of APCs with peroxidase enzyme was evaluated in a reflection spectrophotometer. The transenamel and transdentinal penetration of H2O2 and the L* values obtained at T1, T2 and T3 were subjected to Kruskal-Wallis and Friedman statistical tests. At T1, the H2O2 diffusion in DW was higher than that in BT100 and BT10. At the other evaluation times, the penetration values in BT100 and BT10 increased and remained similar. The L* values increased significantly in all groups at T1. At T2, the L* values were higher in DW, while the values in BT100 and BT10 were similar to each other. At the end of the experiment, BT10 showed the lowest L* values. The pigmentation level did not affect the penetration of H2O2 through the enamel and dentin and the bleaching agent effectively changed the color of the teeth.