Theodore S. Rappaport

Millimeter Wave Mobile Communications for 5G Cellular: It Will Work!

Recent years have witnessed the emergence of machine-to-machine (M2M) networks as an efficient means for providing automated communications among distributed devices. Automated M2M communications can offset the overhead costs of conventional operations, thus promoting their wider adoption in fixed and mobile platforms equipped with embedded processors and sensors/actuators. In this paper, we survey M2M technologies for applications such as healthcare, energy management and entertainment. In particular, we examine the typical architectures of home M2M networks and discuss the performance tradeoffs in existing designs. Our investigation covers quality of service, energy efficiency and security issues. Moreover, we review existing home networking projects to better understand the real-world applicability of these systems. This survey contributes to better understanding of the challenges in existing M2M networks and further shed new light on future research directions.The global bandwidth shortage facing wireless carriers has motivated the exploration of the underutilized millimeter wave (mm-wave) frequency spectrum for future broadband cellular communication networks. There is, however, little knowledge about cellular mm-wave propagation in densely populated indoor and outdoor environments. Obtaining this information is vital for the design and operation of future fifth generation cellular networks that use the mm-wave spectrum. In this paper, we present the motivation for new mm-wave cellular systems, methodology, and hardware for measurements and offer a variety of measurement results that show 28 and 38 GHz frequencies can be used when employing steerable directional antennas at base stations and mobile devices.

Cross-layer design for wireless networks

In this paper, we propose a structure of the DLC (data link control) protocol layer, which consists of the functional component, with radio resource channel allocation method. It is operated by the state of current traffic volume for the efficiency of radio resource utilization. Different adequate components will be taken by the current traffic state, especially fraction based data transmission buffer control method for the QoS (quality of service) assurance

Millimeter-Wave Cellular Wireless Networks: Potentials and Challenges

Millimeter-wave (mmW) frequencies between 30 and 300 GHz are a new frontier for cellular communication that offers the promise of orders of magnitude greater bandwidths combined with further gains via beamforming and spatial multiplexing from multielement antenna arrays. This paper surveys measurements and capacity studies to assess this technology with a focus on small cell deployments in urban environments. The conclusions are extremely encouraging; measurements in New York City at 28 and 73 GHz demonstrate that, even in an urban canyon environment, significant non-line-of-sight (NLOS) outdoor, street-level coverage is possible up to approximately 200 m from a potential low-power microcell or picocell base station. In addition, based on statistical channel models from these measurements, it is shown that mmW systems can offer more than an order of magnitude increase in capacity over current state-of-the-art 4G cellular networks at current cell densities. Cellular systems, however, will need to be significantly redesigned to fully achieve these gains. Specifically, the requirement of highly directional and adaptive transmissions, directional isolation between links, and significant possibilities of outage have strong implications on multiple access, channel structure, synchronization, and receiver design. To address these challenges, the paper discusses how various technologies including adaptive beamforming, multihop relaying, heterogeneous network architectures, and carrier aggregation can be leveraged in the mmW context.

914 MHz path loss prediction models for indoor wireless communications in multifloored buildings

Qualitative models are presented that predict the effects of walls, office partitions, floors, and building layout on the path loss at 914 MHz. The site-specific models have been developed based on the number of floors, partitions, and concrete walls between the transmitter and receiver, and provide simple prediction rules which relate signal strength to the log of distance. The standard deviation between measured and predicted path loss is 5.8 dB for the entire data set, and can be as small as 4 dB for specific areas within a building. Average floor attenuation factors, which describe the additional path loss (in decibels) caused by floors between transmitter and receiver, are found for as many as four floors in a typical office building. Path loss contour plots for measured data are presented. In addition, contour plots for the path loss prediction error indicate that the prediction models presented are accurate to within 6 dB for a majority of locations in a building. >

Propagation measurements and models for wireless communications channels

The authors describe the type of signals that occur in various environments and the modeling of the propagation parameters. Models are essentially of two classes. The first class consists of parametric statistical models that on average describe the phenomenon within a given error. They are simple to use, but relatively coarse. In the last few years a second class of environment-specific models has been introduced. These models are of a more deterministic nature, characterizing a specific street, building, etc. They are necessarily more time consuming to use, but are also more revealing concerning physical details and hopefully more accurate. Some key parameters and the measurement of them are discussed and then the different wireless environments are treated. The latter topic is divided into outdoor environments, indoor environments, and radio penetration from outdoor to indoor environments. >

Millimeter Wave Channel Modeling and Cellular Capacity Evaluation

With the severe spectrum shortage in conventional cellular bands, millimeter wave (mmW) frequencies between 30 and 300 GHz have been attracting growing attention as a possible candidate for next-generation micro- and picocellular wireless networks. The mmW bands offer orders of magnitude greater spectrum than current cellular allocations and enable very high-dimensional antenna arrays for further gains via beamforming and spatial multiplexing. This paper uses recent real-world measurements at 28 and 73 GHz in New York, NY, USA, to derive detailed spatial statistical models of the channels and uses these models to provide a realistic assessment of mmW micro- and picocellular networks in a dense urban deployment. Statistical models are derived for key channel parameters, including the path loss, number of spatial clusters, angular dispersion, and outage. It is found that, even in highly non-line-of-sight environments, strong signals can be detected 100-200 m from potential cell sites, potentially with multiple clusters to support spatial multiplexing. Moreover, a system simulation based on the models predicts that mmW systems can offer an order of magnitude increase in capacity over current state-of-the-art 4G cellular networks with no increase in cell density from current urban deployments.

Position location using wireless communications on highways of the future

With the advances in wireless communications and low-power electronics, accurate position location may now be accomplished by a number of techniques which involve commercial wireless services. Emerging position location systems, when used in conjunction with mobile communications services, will lead to enhanced public safety and revolutionary products and services. The fundamental technical challenges and business motivations behind wireless position location systems are described, and promising techniques for solving the practical position location problem are treated.

Site-specific propagation prediction for wireless in-building personal communication system design

The paper describes a geometrical optics based model to predict propagation within buildings for personal communication system (PCS) design. A ray tracing model for predicting propagation based on a building blueprint representation is presented for a transmitter and receiver located on the same floor inside a building. Measured and predicted propagation data are presented as power delay profiles that contain the amplitude and arrival time of individual multipath components. Measured and predicted power delay profiles are compared on a location-by-location basis to provide both a qualitative and a quantitative measure of the model accuracy. The concept of effective building material properties is developed, and the effective building material properties are derived for two dissimilar buildings based upon comparison of measured and predicted power delay profiles. Time delay comparison shows that the amplitudes of many significant multipath components are accurately predicted by this model. Path loss between a transmitter and receiver is predicted with a standard deviation of less than 5 dB over 45 locations in two different buildings. >

State of the Art in 60-GHz Integrated Circuits and Systems for Wireless Communications

This tutorial presents an overview of the technological advances in millimeter-wave (mm-wave) circuit components, antennas, and propagation that will soon allow 60-GHz transceivers to provide multigigabit per second (multi-Gb/s) wireless communication data transfers in the consumer marketplace. Our goal is to help engineers understand the convergence of communications, circuits, and antennas, as the emerging world of subterahertz and terahertz wireless communications will require understanding at the intersections of these areas. This paper covers trends and recent accomplishments in a wide range of circuits and systems topics that must be understood to create massively broadband wireless communication systems of the future. In this paper, we present some evolving applications of massively broadband wireless communications, and use tables and graphs to show research progress from the literature on various radio system components, including on-chip and in-package antennas, radio-frequency (RF) power amplifiers (PAs), low-noise amplifiers (LNAs), voltage-controlled oscillators (VCOs), mixers, and analog-to-digital converters (ADCs). We focus primarily on silicon-based technologies, as these provide the best means of implementing very low-cost, highly integrated 60-GHz mm-wave circuits. In addition, the paper illuminates characterization techniques that are required to competently design and fabricate mm-wave devices in silicon, and illustrates effects of the 60-GHz RF propagation channel for both in-building and outdoor use. The paper concludes with an overview of the standardization and commercialization efforts for 60-GHz multi-Gb/s devices, and presents a novel way to compare the data rate versus power efficiency for future broadband devices.

Spatial and temporal characteristics of 60-GHz indoor channels

This article presents measurement results and models for 60-GHz channels. Multipath components were resolved in time by using a sliding correlator with 10-ns resolution and in space by sweeping a directional antenna with 7/spl deg/ half power beamwidth in the azimuthal direction. Power delay profiles (PDPs) and power angle profiles (PAPs) were measured in various indoor and short-range outdoor environments. Detailed multipath structure was retrieved from PDPs and PAPs and was related to site-specific environments. Results show an excellent correlation between the propagation environments and the multipath channel structures. The measurement results confirm that the majority of the multipath components can be determined from image based ray tracing techniques for line-of-sight (LOS) applications. For non-LOS (NLOS) propagation through walls, the metallic structure of composite walls must be considered. From the recorded PDPs and PAPs, received signal power and statistical parameters of angle-of-arrival and time-of-arrival were also calculated. These parameters accurately describe the spatial and temporal properties of millimeter-wave channels and can be used as empirical values for broadband wireless system design for 60-GHz short-range channels.