Theresa M. McCormick

Making Hydrogen from Water Using a Homogeneous System Without Noble Metals

A photocatalytic noble metal-free system for the generation of hydrogen has been constructed using Eosin Y (1) as a photosensitizer, the complex [Co(dmgH)(2)pyCl](2+) (5, dmgH = dimethylglyoximate, py = pyridine) as a molecular catalyst, and triethanolamine (TEOA) as a sacrificial reducing agent. The system produces H(2) with an initial rate of approximately 100 turnovers per hour upon irradiation with visible light (lambda > 450 nm). Addition of free dmgH(2) greatly increases the durability of the system addition of 12 equiv of dmgH(2) (vs cobalt) to the system produces approximately 900 turnovers of H(2) after 14 h of irradiation. The rate of H(2) evolution is maximum at pH = 7 and decreases sharply at more acidic or basic pH. Spectroscopic study of photolysis solutions suggests that hydrogen production occurs through protonation of a Co(I) species to give a Co(III) hydride, which then reacts further by reduction and protolysis to give Co(II) and molecular hydrogen.

Reductive Side of Water Splitting in Artificial Photosynthesis: New Homogeneous Photosystems of Great Activity and Mechanistic Insight

Rhodamine photosensitizers (PSs) substituting S or Se for O in the xanthene ring give turnover numbers (TONs) as high as 9000 for the generation of hydrogen via the reduction of water using [Co(III)(dmgH)(2)(py)Cl] (where dmgH = dimethylglyoximate and py = pyridine) as the catalyst and triethanolamine as the sacrificial electron donor. The turnover frequencies were 0, 1700, and 5500 mol H(2)/mol PS/h for O, S, and Se derivatives, respectively (Φ(H(2)) = 0%, 12.2%, and 32.8%, respectively), which correlates well with relative triplet yields estimated from quantum yields for singlet oxygen generation. Phosphorescence from the excited PS was quenched by the sacrificial electron donor. Fluorescence lifetimes were similar for the O- and S-containing rhodamines (∼2.6 ns) and shorter for the Se analog (∼0.1 ns). These data suggest a reaction pathway involving reductive quenching of the triplet excited state of the PS giving the reduced PS(-) that then transfers an electron to the Co catalyst. The longer-lived triplet state is necessary for effective bimolecular electron transfer. While the cobalt/rhodamine/triethanolamine system gives unprecedented yields of hydrogen for the photoreduction of water, mechanistic insights regarding the overall reaction pathway as well as system degradation offer significant guidance to developing even more stable and efficient photocatalytic systems.

Atomistic Band Gap Engineering in Donor–Acceptor Polymers

We have synthesized a series of cyclopentadithiophene-benzochalcogenodiazole donor-acceptor (D-A) copolymers, wherein a single atom in the benzochalcogenodiazole unit is varied from sulfur to selenium to tellurium, which allows us to explicitly study sulfur to selenium to tellurium substitution in D-A copolymers for the first time. The synthesis of S- and Se-containing polymers is straightforward; however, Te-containing polymers must be prepared by postpolymerization single atom substitution. All of the polymers have the representative dual-band optical absorption profile, consisting of both a low- and high-energy optical transition. Optical spectroscopy reveals that heavy atom substitution leads to a red-shift in the low-energy transition, while the high-energy band remains relatively constant in energy. The red-shift in the low-energy transition leads to optical band gap values of 1.59, 1.46, and 1.06 eV for the S-, Se-, and Te-containing polymers, respectively. Additionally, the strength of the low-energy band decreases, while the high-energy band remains constant. These trends cannot be explained by the present D and A theory where optical properties are governed exclusively by the strength of D and A units. A series of optical spectroscopy experiments, solvatochromism studies, density functional theory (DFT) calculations, and time-dependent DFT calculations are used to understand these trends. The red-shift in low-energy absorption is likely due to both a decrease in ionization potential and an increase in bond length and decrease in acceptor aromaticity. The loss of intensity of the low-energy band is likely the result of a loss of electronegativity and the acceptor units ability to separate charge. Overall, in addition to the established theory that difference in electron density of the D and A units controls the band gap, single atom substitution at key positions can be used to control the band gap of D-A copolymers.

Photoswitching Azo Compounds in Vivo with Red Light

The photoisomerization of azobenzenes provides a general means for the photocontrol of molecular structure and function. For applications in vivo, however, the wavelength of irradiation required for trans-to-cis isomerization of azobenzenes is critical since UV and most visible wavelengths are strongly scattered by cells and tissues. We report here that azobenzene compounds in which all four positions ortho to the azo group are substituted with bulky electron-rich substituents can be effectively isomerized with red light (630-660 nm), a wavelength range that is orders of magnitude more penetrating through tissue than other parts of the visible spectrum. When the ortho substituent is chloro, the compounds also exhibit stability to reduction by glutathione, enabling their use in intracellular environments in vivo.

Reversible Intramolecular C−C Bond Formation/Breaking and Color Switching Mediated by a N,C-Chelate in (2-ph-py)BMes2 and (5-BMes2-2-ph-py)BMes2

A diboron compound with both 3-coordinate boron and 4-coordinate boron centers, (5-BMes2-2-ph-py)BMes2 (1) and its monoboron analogue, (2-ph-py)BMes2 (2) have been synthesized. Both compounds are luminescent but have a high sensitivity toward light. UV and ambient light cause both compounds to isomerize to 1a and 2a, respectively, via the formation of a C-C bond between a mesityl and the phenyl group, accompanied by a drastic color change from yellow or colorless to dark olive green or dark blue. The structures of 1a and 2a were established by 2D NMR experiments and geometry optimization by DFT calculations. Both 1a and 2a can thermally reverse back to 1 and 2 via the breaking of a C-C bond, with the activation barrier being 107 and 110 kJ/mol, respectively. The N,C-chelate ligands in 1 and 2 were found to play a key role in promoting this unusual and reversible photo-thermal isomerization process on a tetrahedral boron center. Reactions with oxygen molecules convert 1a and 2a to 5-BMes2-2-[(2-Mes)-ph]-pyridine (1b) and 2-(2-Mes)-ph-pyridine (2b), respectively.

Impact of Ligand Exchange in Hydrogen Production from Cobaloxime-Containing Photocatalytic Systems

Ligand exchange on the Co(dmgH)(2)(py)Cl water reduction catalyst was explored under photocatalytic conditions. The photosensitizer fluorescein was connected to the catalyst through the axially coordinated pyridine. While this two-component complex produces H(2) from water under visible light irradiation in the presence of triethanolamine (TEOA), it is less active than a system containing separate fluorescein and [Co(III)(dmgH)(2)(py)Cl] components. NMR and photolysis experiments show that the Co catalyst undergoes pyridine exchange. Interestingly, glyoximate ligand exchange was also observed photocatalytically and by NMR spectroscopy, thereby showing that integrated systems in which the photosensitizer is linked directly to the Co(dmgH)(2)(py)Cl catalyst may not remain intact during H(2) photogeneration. These studies have also given rise to insights into the catalyst decomposition mechanism.

Poly(3-alkyltellurophene)s Are Solution-Processable Polyheterocycles

The synthesis and characterization of a series of poly(3-alkyltellurophene)s are described. Polymers are prepared by both electrochemical and Kumada catalyst transfer polymerization methods. These polymers have reasonably high molecular weights (M(n) = 5.4-11.3 kDa) and can be processed in a manner analogous to that of their lighter atom analogues. All examples exhibit red-shifted optical absorption, as well as solid-state organization, as evidenced by absorption spectroscopy and atomic force microscopy. Overall, the synthesis and characterization of these materials open up a wide range of future studies involving tellurium-based polyheterocycles.

Diarylamino functionalized pyrene derivatives for use in blue OLEDs and complex formation

Three new 2,2′-dipyridylamino functionalized pyrene derivatives, 1-pyrenyl-2,2′-dipyridylamine (1), 4-(1-pyrenyl)phenyl-2,2′-dipyridylamine (2), and 4-[4′-(1-pyrenyl)biphenyl]-2,2′-dipyridylamine (3) have been synthesized and fully characterized. For comparison of electronic properties, a diphenylamino functionalized molecule 4-[4′-(1-pyrenyl)biphenyl]diphenylamine (4) has also been synthesized. Compounds 1–4 are bright blue emitters in solution and in the solid state with λmax at ∼420–460 nm and a high emission efficiency in solution. All four compounds form amorphous glasses with Tg values of 66 °C, 79 °C, 165 °C, and 98 °C, respectively. The electronic properties of the four compounds were examined by spectroscopic methods, cyclic voltammetry and Gaussian 98 molecular orbital calculations. The utilities of this class of molecules in OLEDs have been demonstrated by EL devices of compounds 3 and 4, which showed that 3 can function as a bright blue emitter and an electron transport material in a double-layer device while 4 can function as a bright blue emitter and a hole transport molecule in a triple-layer device. The dipyridylamino functional group in molecules 1–3 are capable of chelating to metal ions such as Zn(II) as demonstrated by the synthesis and structure of the complex [2·(Zn(O2CCF3)2]2 (5). The binding of Zn(II) ions to the dipyridyl group causes a reduction of the emission efficiency of the ligand 2.

Synthesis and Characterization of Neutral Luminescent Diphosphine Pyrrole- and Indole-Aldimine Copper(I) Complexes

Heteroleptic copper(I) complexes of the types [Cu(N,N)(P,P)] and [Cu(N,O)(P,P)], where (P,P) = phosphine (PPh(3)) or diphosphine (dppb, DPEPHOS, XANTPHOS), (N,N) = pyrrole-2-phenylcarbaldimine, 2PyN: [Cu(2PyN)(PPh(3))(2)] (1), [Cu(2PyN) (dppb)] (2), [Cu(2PyN)(DPEPHOS)] (3), and [Cu(2PyN)(XANTPHOS)] (4), (N,N) = indole-2-phenylcarbaldimine, 2IndN: [Cu(2IndN)(DPEPHOS)] (8), and (N,O) = pyrrole-2-carboxaldehyde, 2PyO: [Cu(2PyO)(DPEPHOS)] (5), [Cu(2PyO)(XANTPHOS)] (6), or (N,O) = indole-2-carboxaldehyde, 2IndO: [Cu(2IndO)(DPEPHOS)] (7), were synthesized and characterized by multinuclear NMR spectroscopy, electronic absorption spectroscopy, fluorescence spectroscopy, and X-ray crystallography (1-3, 5-8). The complexes with aldimine ligands are thermally stable, and sublimation of 2-4 was possible at T = 230-250 °C under vacuum. All complexes exhibit long-lived emission in solution, in the solid state, and in frozen glasses. The excited states have been assigned as mixed intraligand and metal-to-ligand charge transfer (3)(MLCT + π-π*) transitions through analysis of the photophysical properties and DFT calculations on representative examples.

Robust Visible Light Photoswitching with Ortho-Thiol Substituted Azobenzenes

Introduction of S-ethyl groups in all four ortho positions of azobenzene prevents reduction of the azo group by intracellular glutathione, while enhancing the absorptivity to ~10,000 M(-1) cm(-1) in the blue and green regions of the visible spectrum. cis-to-trans isomerization occurs thermally on the minutes timescale. Further, this substitution pattern permits switching with red light, a color that is more penetrating through biological tissues than other parts of the visible spectrum.