Thiago Fernandes Bernardes

Study on the practices of silage production and utilization on Brazilian dairy farms.

Dairy farmers across Brazil were invited to participate in a study on silage production and utilization practices. Two hundred sixty farmers filled out a questionnaire, which was made available on a website. The questionnaire consisted of 14 questions, including information about the characteristics of the herd (n=3), the crop(s) used in the ensiling process, the use of additives, the harvest (n=3), the type of silo (n=1), aspects related to sealing (n=2), and management practices applied during feed-out (n=3). Farmers were also asked a final question about the main barriers they faced when producing and using silage. The main dairy-producing regions of Brazil had a strong influence on the number of participants. The profiles of farmers were heterogeneous and divided into 5 groups, which was considered a positive attribute of the study, allowing better analysis and assessment of current circumstances. Corn was the most widely grown crop for silage. Sorghum, tropical grasses, and sugarcane were the other species most cited. Additives were used by a small number of farmers (27.7%). Approximately 40% of farmers still depended on loaned equipment or outsourced services. The pull-type forage harvester was the main piece of equipment used on dairy farms (90.4%). Only 54.6% of respondents answered that they sharpen their harvester knives daily. Horizontal silos (bunker and stack) were the structures most commonly used to store silage. Most farmers sealed silos with double-sided plastic film (black-on-white) and with soil. However, almost one-fifth of all farmers still use black plastic. Manual removal of silage from the silos was practiced at most farms (i.e., the lack of equipment was also reflected in the stage of silage utilization). Disposal of spoiled silage before inclusion in the livestock feed was not a common practice on the farms. The main barriers encountered on the farms were lack of equipment, lack of manpower, and climatic variations. The results of this research may guide researchers, industries, extension workers, and governments to seek efficiency in milk production on farms using silage in the diet of livestock throughout the year or during part of the year in Brazil.

Fermentation and aerobic stability of corn silage inoculated with Lactobacillus buchneri

The characteristics of fermentation and aerobic stability were evaluated in corn silage inoculated with different doses of Lactobacillus buchneri. The whole corn plant (300 g/kg DM) was ensiled in quadruplicate laboratory silos (7L). L. buchneri 40788 was applied at 5×104, 1×105, 5×105 and 1×106 cfu/g of fresh forage. Silages with no additive were used as controls. After 130 d of ensiling, the silages were subjected to an aerobic stability evaluation for 12 days, in which chemical and microbiological parameters as well as the temperature of the silage were measured to determine the aerobic deterioration. The addition of L. buchneri resulted in increased acetic acid concentrations. The number of yeast colonies was low in all treated silages. The pH, lactic and propionic acid concentrations did not differ between silages. Under aerobic conditions, all the treated silages showed a low number of yeasts and a great aerobic stability. Therefore, L. buchneri is effective against yeasts and improves the aerobic stability of corn silage in laboratory silos. However, doses equal or superior to 1×105 cfu/g of fresh forage were more efficient in the control of aerobic spoilage.

Doses e fontes de nitrogênio na recuperação das características estruturais e produtivas do capim-marandu

To replenish soil fertility is one of the ways of recovering the productive capacity of degraded pasture. Nitrogen fertilisation is fundamental to increasing forage production, especially when it comes to the recovery of pasture. With this in mind, the objective of this work was to evaluate the structural characteristics and dry matter (DM) accumulation of the leaf blades and sheathed stems of marandu-grass pasture at a moderate stage of degradation, for different dosages and sources of nitrogen, during a three-year period. The experiment was carried out from July, 2003 to March, 2006 at the Model Farm of the Goias State University (UEG), over an area of 882 m2 with plots of 20 m 2 and usable area of 6 m 2. The experimental design was of randomized blocks with three replications. The treatments in the plots were characterized by a 2 x 4 factorial, being two nitrogen sources (ammonium sulphate and urea) and four nitrogen dosages (0; 100; 200 and 300 kg ha-1 yr-1). For each sub-plot, treatments were represented by the years (2004, 2005 and 2006), as relating to the time of the recovery of the pasture. Nitrogen fertilization was divided into three applications, following each harvesting of the grass for forage evaluation. The results showed that nitrogen fertilisation influenced the structural characteristics and dry matter accumulation of marandu grass, and hence its recovery. The dosage of 300 kg ha-1 yr-1 of ammonium sulphate resulted in greater values

Fermentation and aerobic stability of high-moisture corn silages inoculated with different levels of Lactobacillus buchneri

Fermentation and aerobic stability were evaluated in high-moisture corn (HMC) silage inoculated with different levels of Lactobacillus buchneri. The HMC composed of 654 g/kg dry matter (DM) was ensiled in quadruplicate laboratory silos (7 L) per treatment. L. buchneri 40788 was applied at 5 × 104; 1 × 105; 5 × 105; and 1 × 106 cfu/g to the ground corn. Silages with no additive were used as controls. After 140 d of ensiling, the silages were subjected to an aerobic stability evaluation for 12 days in which the chemical parameters, microbiological parameters and silage temperature were measured to determine the aerobic deterioration. The lactic acid, acetic acid and propionic acid concentrations did not differ between silages. The fermentation parameters of HMC were not affected by L. buchneri. The HMC containing L. buchneri had a low number of yeast and mould colonies and a more stable pH until in the eighth measurement, which improved the aerobic stability without affecting gas loss. Doses of L. buchneri greater than or equal to 5 × 105 cfu/g applied to the HMC were the most efficient in control of aerobic deterioration.

Lining bunker walls with oxygen barrier film reduces nutrient losses in corn silages

The objective of this study was to evaluate 2 systems for covering corn silage in bunker silos. The first system consisted of a sheet of 45-μm-thick oxygen barrier film (OB, polyethylene + ethylene-vinyl alcohol) placed along the length of the sidewall before filling. After filling, the excess film was pulled over the wall on top of the silage, and a sheet of polyethylene was placed on top. The second system involved using a standard sheet (ST) of 180-μm-thick polyethylene film. Eight commercial bunker silos were divided into 2 parts lengthwise so that one-half of the silo was covered with OB and the other half with a ST system. During the filling, 3 net bags with chopped corn were buried in the central part (halfway between the top and bottom of the silo) of the bunkers (CCOR) in 3 sections 10 m apart. After filling, 18 net bags (9 per covering system) were buried 40 cm below the top surface of the 3 sections. These bags were placed at 3 distances from the bunker walls (0 to 50 cm, 51 to 100 cm, and 101 to 150 cm). During unloading, the bags were removed from the silos to determine the dry matter (DM) losses, fermentation end products, and nutritive value. The Milk2006 spreadsheet was used to estimate milk per tonne of DM. The model included the fixed effect of treatment (7 different locations in the bunker) and the random effect of the silo. Two contrasts were tested to compare silages in the top laterals (shoulders) with that in the CCOR (CCOR vs. OB and CCOR vs. ST). Three contrasts compared the corresponding distances of the silage covered by the 2 systems (OB50 vs. ST50, OB100 vs. ST100 and OB150 vs. ST150). Variables were analyzed with the PROC MIXED procedure of the SAS at the 5% level. The OB method produced well-fermented silages, which were similar to CCOR, whereas the OB system showed less lactic acid and greater pH and mold counts compared with CCOR. The ST method had 116.2 kg of milk/t less than the CCOR, as the OB system and the CCOR were similar (1,258.3 and 1,294.0 kg/t, respectively). Regarding the distances from the walls, the effects were more pronounced from 0 to 101 cm. The OB50 and OB100 silages had better quality and lower mold counts and DM losses than ST50 and ST100. The OB system reduced DM and nutrient losses at the shoulders in farm bunker corn silages compared with no sidewall plastic. The OB film should lap onto the crop for at least 200 cm so that 150 cm are covered outward from the wall.

The influence of covering methods on the nutritive value of corn silage for lactating dairy cows

The objective of this study was to evaluate the effect of covering methods on the nutritive value of corn silage and performance of dairy cows. Whole-plant corn was harvested at 340 g/kg of dry matter (DM) and ensiled for 135 d in horizontal silos covered with one of the following methods: oxygen barrier film (45-µm thick) + white-on-black polyethylene film (200-µm thick) over the oxygen barrier film (OB+WB); white-on-black polyethylene film (200-µm thick) (WB); black polyethylene film (200-µm thick) (B); or recycled black polyethylene film (200-µm thick) covered with a layer of 10 cm of sugarcane bagasse (RB+SB). Nutrient composition, fermentation profile, and yeast and mold counts in edible silages were similar across treatments. Silage temperature during the storage period was 24.6, 28.7, 28.4 and 33.1 °C for RB+SB, OB+WB, WB and B, respectively, and the proportion of spoiled silage ranged from 28.7 (for the RB+SB treatment) to 74.2 g/kg DM (for the B treatment). Dry matter intake was similar across treatments and averaged 21.9 kg/d. Milk production was higher for cows fed corn silage covered with RB+SB (34.4 kg/d) compared with those fed corn silage covered with B (30.4 kg/d), resulting in higher feed efficiency for RB+SB treatment. Silages covered with OB+WB and WB had intermediate values. In vivo digestibility of organic matter was higher for cows fed corn silage covered with RB+SB compared with those fed corn silage covered with WB and B, but were similar to those fed corn silage covered with OB+WB. The utilization of oxygen barrier films and the protection of polyethylene film with sugarcane bagasse are effective strategies to increase the recovery of digestible nutrients and, consequently, to enhance production efficiency of lactating dairy cows.

Technological innovations in silage production and utilization

Technology innovation is the process through which new technologies are developed. Silage research addresses the various agronomical, biochemical, microbiological, nutritional and engineering aspects of the process. Forage harvesters, additives (inoculants), and plastic films for sealing are important recent developments. The corn silage is the major source of energy in rations, but recently the use of other ensiled crops, such as sugarcane and legumes, has been increased. Two newer ensiling techniques are the pressed bag and the wrapped bale. Polyethylene film has been the most common method used to protect silage near the surface, but new plastic films are available or in the process of development. A co-extruded polyethylene-polyamide film and new polyvinyl alcohol film also have been used to seal corn silage. Various types of additives have been developed in order to improve the ensiling process. Lactobacillus buchneri, that is an obligate heterolactic acid bacterium, might improve the aerobic stability of silages and have been more effective in corn silage than in other silages. Energy production from silage has also attracted much interest in recent years, as perennial grasses that have been stored as biomass to produce biofuels in the United States, and silage as feedstock for biogas in Europe.

Effects of grazing management in brachiaria grass-forage peanut pastures on canopy structure and forage intake1

Maintenance of mixed grass-legume pastures for stand longevity and improved animal utilization is a challenge in warm-season climates. The goal of this study was to assess grazing management on stand persistence, forage intake, and N balance of beef heifers grazing mixed pastures of Brachiaria brizantha and Arachis pintoi. A two-year experiment was carried out in Brazil, where four grazing management were assessed: rest period interrupted at 90%, 95%, and 100% of light interception (LI) and a fixed rest period of 42 days (90LI, 95LI, 100LI, and 42D, respectively). The LI were taken at 50 points at ground level and at five points above the canopy for each paddock using a canopy analyzer. For all treatments, the post-grazing stubble height was 15 cm. Botanical composition and canopy structure characteristics such as canopy height, forage mass, and vertical distribution of the morphological composition were evaluated pre-and post-grazing. Forage chemical composition, intake, and microbial synthesis were also determined. A randomized complete block design was used, considering the season of the year as a repeated measure over time. Grazing management and season were considered fixed, while block and year were considered random effects. In the summer, legume mass accounted for 19% of the canopy at 100LI, which was less than other treatments (a mean of 30%). The 100LI treatment had a greater grass stem mass compared with other treatments. In terms of vertical distribution for 100LI, 38.6% of the stem mass was above the stubble height, greater than the 5.7% for other treatments. The canopy structure limited neutral detergent fiber intake (P = 0.007) at 100LI (1.02% of BW/d), whereas 42D, 90LI, and 95LI treatments had NDF intake close to 1.2% of BW/d. The intake of digestible organic matter (OM; P = 0.007) and the ratio of crude protein/digestible OM (P < 0.001) were less at 100LI in relation to the other treatments. The production of microbial N (P < 0.001) and efficiency of microbial synthesis (P = 0.023) were greater at 95LI and 90LI, followed by 42D and less at 100LI. Overall, the range from 90 to 95% of LI is the recommendation to interrupt the rest period, since this strategy enhanced community stability, forage intake, and nutritional value of the diet. Under on-farm conditions, brachiaria grass and forage peanut pastures should be managed at a range height of 24 to 30 cm.

Palm kernel meal as additive in the elephant-grass silage

The objective of this study was to evaluate the effect of adding palm kernel meal (BP) as an additive in elephant grass silage. The chemical qualitative and fermentation were analysed in a completely randomized design with six treatments, one with no BP (C) and six replications, where the averages of the results of days of closing and opening were analysed by regression analysis. We collected samples at the time of ensiling and after 190 days of storage for evaluation of dry matter, crude protein, carbohydrates (total, non-fibrous, water-soluble, cellulose and hemicellulose), ash, lignin and ether extract. In aerobic phase, we collected samples for pH, ammoniacal nitrogen, fungi and yeasts. The elephant grass of this experiment showed values of 13.9% DM and 8.25% CP while the BP has 77.2% DM and 16.9% CP. The inclusion of BP had inhibited the growth of fungi and yeasts. The increase in the content of BP decreased the concentration of NH3-N. Higher concentrations of BP in silage were more stable, and the stability breaks in 72 hours, while the stability of C was 19 hours. Concentrations above 15% BP had no significant variations in pH in the aerobic phase. The inclusion of palm kernel meal at concentrations 10% to 15% can be used in silage of elephant grass, inhibiting undesired fermentation and making them more stable. Concentrations above this value may affect the nutritive value of silage by high lignin content of the additive.

Uso de inoculante bacteriano e melaço na ensilagem de capim-Elefante

Os experimentos foram conduzidos para se estudar o efeito da inclusao em doses crescentes das bacterias homolaticas Lactobacillus plantarum MA18/5U e Pediococcus acidilactici MA 18/5M, associadas ou nao com melaco em silagens de capim-Elefante ( Pennisetum purpureum cv. Roxo). Dois experimentos foram realizados utilizando-se silos experimentais de 15L e quatro repeticoes em cada tratamento. O experimento 1 (E1) consistiu na ausencia do inoculante bacteriano ou com aplicacao de 5x10 4 , 1x10 5 , 5x10 5 ou 1x10 6 xa0ufc/g forragem. O experimento 2 (E2) consistiu em silagens sem melaco e inoculante, com a aplicacao de 1x10 5 ufc/g do inoculante com ou 5% de melaco e outra inoculacao com 1x10 6 ufc/g com ou sem 5% de melaco. Nao houve diferenca significativa na composicao quimica das silagens, na contagem de fungos e perdas de materia seca, mas houve diferenca na contagem de leveduras no momento de abertura em ambos os experimentos. No E1 os tratamentos com maior dosagem do inoculante foram os mais estaveis quando as silagens foram expostas ao ar. No E2, as silagens com melaco e o tratamento que recebeu a maior dosagem tambem apresentaram maior estabilidade em aerobiose. A utilizacao do inoculante contendo L. plantarum MA18/5U e P. acidilactici MA 18/5M pode ser recomendavel em altas concentracoes, inclusive associado com melaco, pois melhorou a estabilidade aerobia, mas em termos de perfil fermentativo e composicao quimica, seus efeitos nao foram demonstrados.