Thomas M. Babinec

A diamond nanowire single-photon source

The development of a robust light source that emits one photon at a time will allow new technologies such as secure communication through quantum cryptography. Devices based on fluorescent dye molecules, quantum dots and carbon nanotubes have been demonstrated, but none has combined a high single-photon flux with stable, room-temperature operation. Luminescent centres in diamond have recently emerged as a stable alternative, and, in the case of nitrogen-vacancy centres, offer spin quantum bits with optical readout. However, these luminescent centres in bulk diamond crystals have the disadvantage of low photon out-coupling. Here, we demonstrate a single-photon source composed of a nitrogen-vacancy centre in a diamond nanowire, which produces ten times greater flux than bulk diamond devices, while using ten times less power. This result enables a new class of devices for photonic and quantum information processing based on nanostructured diamond, and could have a broader impact in nanoelectromechanical systems, sensing and scanning probe microscopy.

Enhanced single-photon emission from a diamond–silver aperture

Directly embedding single nitrogen–vacancy centres into ordered arrays of plasmonic nanostructures can enhance their radiative emission rate and thus give greater scalability over previous bottom-up approaches for the realization of on-chip quantum networks.

Inverse design and demonstration of a compact and broadband on-chip wavelength demultiplexer

An on-chip integrated wavelength demultiplexer designed using an inverse computational algorithm is experimentally demonstrated. 1,300 and 1,550 nm wavelength light is sorted in a device area of just 2.8 × 2.8 μm2.

Design and focused ion beam fabrication of single crystal diamond nanobeam cavities

We present the design and fabrication of nanobeam photonic crystal cavities in single crystal diamond for applications in cavity quantum electrodynamics. First, we describe three-dimensional finite-difference time-domain simulations of a high quality factor (Q∼106) and small mode volume [V∼0.5(λ/n)3] cavity whose resonance corresponds to the zero-phonon transition (637 nm) of the nitrogen-vacancy color center in diamond. This high Q/V structure, which would allow for strong light-matter interaction, is achieved by gradually tapering the size of the photonic crystal holes between the defect center and the mirror regions of the nanobeam. Next, we demonstrate two different focused ion beam (FIB) fabrication strategies to generate thin diamond membranes and nanobeam photonic crystal resonators from a bulk crystal. These approaches include a diamond crystal “side-milling” procedure as well as an application of the “lift-out” technique used in transmission electron microscopy sample preparation. Finally, we dis...

Fabrication and characterization of high-quality-factor silicon nitride nanobeam cavities

We present the fabrication and characterization of high-quality-factor (Q) Si3N4 photonic crystal nanobeam cavities at visible wavelengths for coupling to nitrogen-vacancy centers in a cavity QED system. Confocal microphotoluminescence analysis of the nanobeam cavities demonstrates quality factors up to Q ~ 55,000, which are limited by the resolution of our grating spectrometer. This is a 1-order-of-magnitude improvement over previous SiNx cavities at this important wavelength range. We also demonstrate coarse tuning of cavity resonances across 600-700 nm by lithographically scaling the size of fabricated devices.

Plasmonic resonators for enhanced diamond NV-center single photon sources.

We propose a novel source of non-classical light consisting of plasmonic aperture with single-crystal diamond containing a single Nitrogen-Vacancy (NV) color center. Theoretical calculations of optimal structures show that these devices can simultaneously enhance optical pumping by a factor of 7, spontaneous emission rates by Fp~50 (Purcell factor), and offer collection efficiencies up to 40%. These excitation and collection enhancements occur over a broad range of wavelengths (~30 nm), and are independently tunable with device geometry, across the excitation (~530 nm) and emission (~600-800 nm) spectrum of the NV center. Implementing this system with top-down techniques in bulk diamond crystals will provide a scalable architecture for a myriad of diamond NV center applications.

Photonic crystal cavities in cubic (3C) polytype silicon carbide films

We present the design, fabrication, and characterization of high quality factor (Q ~10(3)) and small mode volume (V ~0.75 (λ/n)(3)) planar photonic crystal cavities from cubic (3C) thin films (thickness ~200 nm) of silicon carbide (SiC) grown epitaxially on a silicon substrate. We demonstrate cavity resonances across the telecommunications band, with wavelengths from 1.25 - 1.6 μm. Finally, we discuss possible applications in nonlinear optics, optical interconnects, and quantum information science.

Readout and control of a single nuclear spin with a metastable electron spin ancilla

Electron and nuclear spins associated with point defects in insulators are promising systems for solid-state quantum technology. The electron spin is usually used for readout and addressing, and nuclear spins are used as exquisite quantum bits and memory systems. With these systems, single-shot readout of single nuclear spins as well as entanglement, aided by the electron spin, have been shown. Although the electron spin in this example is essential for readout, it usually limits the nuclear spin coherence, leading to a quest for defects with spin-free ground states. Here, we isolate a hitherto unidentified defect in diamond and use it at room temperature to demonstrate optical spin polarization and readout with exceptionally high contrast (up to 45%), coherent manipulation of an individual excited triplet state spin, and coherent nuclear spin manipulation using the triplet electron spin as a metastable ancilla. We demonstrate nuclear magnetic resonance and Rabi oscillations of the uncoupled nuclear spin in the spin-free electronic ground state. Our study demonstrates that nuclei coupled to single metastable electron spins are useful quantum systems with long memory times, in spite of electronic relaxation processes.

Hybrid Group IV Nanophotonic Structures Incorporating Diamond Silicon-Vacancy Color Centers

We demonstrate a new approach for engineering group IV semiconductor-based quantum photonic structures containing negatively charged silicon-vacancy (SiV(-)) color centers in diamond as quantum emitters. Hybrid diamond-SiC structures are realized by combining the growth of nano- and microdiamonds on silicon carbide (3C or 4H polytype) substrates, with the subsequent use of these diamond crystals as a hard mask for pattern transfer. SiV(-) color centers are incorporated in diamond during its synthesis from molecular diamond seeds (diamondoids), with no need for ion-implantation or annealing. We show that the same growth technique can be used to grow a diamond layer controllably doped with SiV(-) on top of a high purity bulk diamond, in which we subsequently fabricate nanopillar arrays containing high quality SiV(-) centers. Scanning confocal photoluminescence measurements reveal optically active SiV(-) lines both at room temperature and low temperature (5 K) from all fabricated structures, and, in particular, very narrow line widths and small inhomogeneous broadening of SiV(-) lines from all-diamond nanopillar arrays, which is a critical requirement for quantum computation. At low temperatures (5 K) we observe in these structures the signature typical of SiV(-) centers in bulk diamond, consistent with a double lambda. These results indicate that high quality color centers can be incorporated into nanophotonic structures synthetically with properties equivalent to those in bulk diamond, thereby opening opportunities for applications in classical and quantum information processing.

Hybrid metal-dielectric nanocavity for enhanced light-matter interactions

Despite tremendous advances in the fundamentals and applications of cavity quantum electrodynamics (CQED), investigations in this field have primarily been limited to optical cavities composed of purely dielectric materials. Here, we demonstrate a hybrid metal-dielectric nanocavity design and realize it in the InAs/GaAs quantum photonics platform utilizing angled rotational metal evaporation. Key features of our nanometallic light-matter interface include: (i) order of magnitude reduction in mode volume compared to that of leading photonic crystal CQED systems; (ii) surface-emitting nanoscale cylindrical geometry and therefore good collection efficiency; and finally (iii) strong and broadband spontaneous emission rate enhancement (Purcell factor ~ 8) of single photons. This light-matter interface may play an important role in quantum technologies.