Tiffany M. Jarrell

Cleavage and hydrodeoxygenation (HDO) of C–O bonds relevant to lignin conversion using Pd/Zn synergistic catalysis

The development of chemical methods for the direct catalytic conversion of biomass to high value organic molecules is an area of increasing interest. The plant matter component known as lignin is a polymer consisting of aromatic rings that could provide a means of obtaining aromatic materials currently derived solely from petroleum. This report describes a bimetallic Pd/C and Zn catalytic system that can perform selective hydrodeoxygenation (HDO) of monomeric lignin surrogates as well as successfully cleave the β-O-4 linkages found in dimeric lignin model complexes and synthetic lignin polymers with near quantitative conversions and yields between 80–90%. The reaction with lignin polymer was highly selective affording methoxy substituted propylphenol as the major product. These reactions were performed in a Parr reactor operating at relatively mild temperature (150 °C) and pressure (20 bar H2) using methanol as a solvent. Reaction products were characterized using high-pressure liquid chromatography coupled to a linear quadrupole ion trap mass spectrometer equipped with an electrospray ionization source using negative ion mode. Hydroxide ions were doped into the analyte solutions to encourage negative ion formation. This method ionizes all the mixture components to yield a single ion/analyte with no fragmentation. The catalyst is fully recyclable without the need for additional zinc. X-ray absorption spectroscopy (EXAFS) is consistent with Pd nanoparticles (4–5 nm) and no evidence of Pd–Zn alloy formation. A mechanistic hypothesis on the synergy between Pd and Zn is presented.

A synergistic biorefinery based on catalytic conversion of lignin prior to cellulose starting from lignocellulosic biomass

Current biomass utilization processes do not make use of lignin beyond its heat value. Here we report on a bimetallic Zn/Pd/C catalyst that converts lignin in intact lignocellulosic biomass directly into two methoxyphenol products, leaving behind the carbohydrates as a solid residue. Genetically modified poplar enhanced in syringyl (S) monomer content yields only a single product, dihydroeugenol. Lignin-derived methoxyphenols can be deoxygenated further to propylcyclohexane. The leftover carbohydrate residue is hydrolyzed by cellulases to give glucose in 95% yield, which is comparable to lignin-free cellulose (solka floc). New conversion pathways to useful fuels and chemicals are proposed based on the efficient conversion of lignin into intact hydrocarbons.

High-performance liquid chromatography/high-resolution multiple stage tandem mass spectrometry using negative-ion-mode hydroxide-doped electrospray ionization for the characterization of lignin degradation products.

In the search for a replacement for fossil fuel and the valuable chemicals currently obtained from crude oil, lignocellulosic biomass has become a promising candidate as an alternative biorenewable source for crude oil. Hence, many research efforts focus on the extraction, degradation, and catalytic transformation of lignin, hemicellulose, and cellulose. Unfortunately, these processes result in the production of very complex mixtures. Further, while methods have been developed for the analysis of mixtures of oligosaccharides, this is not true for the complex mixtures generated upon degradation of lignin. For example, high-performance liquid chromatography/multiple stage tandem mass spectrometry (HPLC/MS(n)), a tool proven to be invaluable in the analysis of complex mixtures derived from many other biopolymers, such as proteins and DNA, has not been implemented for lignin degradation products. In this study, we have developed an HPLC separation method for lignin degradation products that is amenable to negative-ion-mode electrospray ionization (ESI doped with NaOH), the best method identified thus far for ionization of lignin-related model compounds without fragmentation. The separated and ionized compounds are then analyzed by MS(3) experiments to obtain detailed structural information while simultaneously performing high-resolution measurements to determine their elemental compositions in the two parts of a commercial linear quadrupole ion trap/Fourier-transform ion cyclotron resonance mass spectrometer. A lignin degradation product mixture was analyzed using this method, and molecular structures were proposed for some components. This methodology significantly improves the ability to analyze complex product mixtures that result from degraded lignin.

Characterization of organosolv switchgrass lignin by using high performance liquid chromatography/high resolution tandem mass spectrometry using hydroxide-doped negative-ion mode electrospray ionization

Lignin is an aromatic biopolymer that may yield valuable chemicals currently obtained solely from petroleum. However, extraction of lignin by using traditional methods, such as organosolv extraction, produces very complex mixtures. Molecular level characterization of the major components is essential to be able to rationally tailor methodology for the conversion of these mixtures to transportation fuel and valuable chemicals. In this study, high performance liquid chromatography/high resolution tandem mass spectrometry (HPLC/MSn) was used to obtain molecular weight, elemental composition and structural information for the major components in an organosolv lignin sample. HPLC/MSn coupled with hydroxide-doped electrospray ionization was used to identify the structures of the major components by using a Thermo Scientific linear quadrupole ion trap-Fourier transform ion cyclotron resonance hybrid mass spectrometer (LQIT/FT-ICR). The results reported here demonstrate that the major products of organosolv extraction are low molecular weight compounds, including monomeric and dimeric lignin units, with various functionalities.

A Differentially Pumped Dual Linear Quadrupole Ion Trap (DLQIT) Mass Spectrometer: A Mass Spectrometer Capable of MS n Experiments Free From Interfering Reactions

A novel differentially pumped dual linear quadrupole ion trap (DLQIT) mass spectrometer was designed and built to facilitate tandem MS experiments free from interfering reactions. The instrument consists of two differentially pumped Thermo Scientific linear quadrupole ion trap (LQIT) systems that have been connected via an ion transfer octupole encased in a machined manifold. Tandem MS experiments can be performed in the front trap and then the resulting product ions can be transferred via axial ejection into the back trap for further, independent tandem MS experiments in a differentially pumped area. This approach allows the examination of consecutive collision-activated dissociation (CAD) and ion-molecule reactions without unwanted side reactions that often occur when CAD and ion-molecule reactions are examined in the same space. Hence, it greatly facilitates investigations of ion structures. In addition, the overall lower pressure of the DLQIT, as compared to commercial LQIT instruments, results in a reduction of unwanted side reactions with atmospheric contaminants, such as water and oxygen, in CAD and ion-molecule experiments.

Multiported pulsed valve interface for a linear quadrupole ion trap mass spectrometer to enable rapid screening of multiple functional-group selective ion-molecule reactions.

Ion-molecule reactions provide a powerful tool for structural elucidation of ionized pharmaceutical analytes in tandem mass spectrometry. However, all previous interfaces for the introduction of reagents for ion-molecule reactions have utilized a single reagent approach. In this study, a multiported pulsed valve system was designed and characterized for rapid introduction of three neutral reagents into a linear quadrupole ion trap. Additionally, automatic triggering was used to allow for the introduction of the reagents on a chromatographic time scale. This system enables automatic, high throughput screening of complex mixtures by using at least three different ion-molecule reactions. Further, rapid testing of new neutral reagents is also possible.

Laser-Induced Acoustic Desorption/Electron Ionization of Amino Acids and Small Peptides

AbstractLaser-induced acoustic desorption (LIAD) allows for desorption of neutral nonvolatile compounds independent of their volatility or thermal stability. Many different ionization methods have been coupled with LIAD. Hence, this setup provides a better control over the types of ions formed than other mass spectrometry evaporation/ionization methods commonly used to characterize biomolecules, such as ESI or MALDI. In this study, the utility of LIAD coupled with electron ionization (EI) was tested for the analysis of common amino acids with no derivatization. The results compared favorably with previously reported EI mass spectra obtained using thermal desorption/EI. Further, LIAD/EI mass spectra collected for hydrochloride salts of two amino acids were found to be similar to those measured for the neutral amino acids with the exception of the appearance of an HCl+● ion. However, the hydrochloride salt of arginine showed a distinctly different LIAD/EI mass spectrum than the previously published literature EI mass spectrum, likely due to its highly basic side chain that makes a specific zwitterionic form particularly favorable. Finally, EI mass spectra were measured for seven small peptides, including di-, tri-, and tetrapeptides. These mass spectra show a variety of ion types. However, an type ions are prevalent. Also, electron-induced dissociation (EID) of protonated peptides has been reported to form primarily an type ions. In addition, the loss of small neutral molecules and side-chain cleavages were observed that are reminiscent of other high-energy fragmentation methods, such as EID. Finally, the isomeric dipeptides LG and IG were found to produce drastically different EI mass spectra, thus allowing differentiation of the leucine and isoleucine amino acids in these dipeptides. Graphical Abstractᅟ