Tim R. Dargaville

High energy radiation grafting of fluoropolymers

Fluoropolymers are known as chemically inert materials with good high temperature resistance, so they are often the materials of choice for harsh chemical environments. These properties arise because the carbon-fluorine bond is the strongest of all bonds between other elements and carbon, and, because of their large size, fluorine atoms can protect the carbon backbone of polymers such as poly(tetrafluoroethylene), PTFE, from chemical attack. However, while the carbon-fluorine bond is much stronger than the carbon hydrogen bond, the G values for radical formation on high energy radiolysis of fluoropolymers are roughly comparable to those of their protonated counterparts. Thus, efficient high energy radiation grafting of fluoropolymers is practical, and this process can be used to modify either the surface or bulk properties of a fluoropolymer. Indeed, radiation grafted fluoropolymers are currently being used as separation membranes for fuel cells, hydrophilic filtration membranes and matrix substrate materials for use in combinatorial chemistry. Herein we present a review of recent studies of the high energy radiation grafting of fluoropolymers and of the analytical methods available to characterize the grafts

Design, fabrication and characterization of PCL electrospun scaffolds—a review

The expanding interest in electrospinning fibers for bioengineering includes a significant use of polyesters, including poly(3-caprolactone) (PCL). This review summarizes literature on PCL and selected blends, and provides extensive descriptions of the broad range of parameters used in manufacturing such electrospun fibers. Furthermore the chemical, physical and biological approaches for characterizing the electrospun material are described and opinions offered on important information to include in future publications with this electrospun material.

Electrospinning and additive manufacturing: converging technologies

A well-engineered scaffold for regenerative medicine, which is suitable to be translated from the bench to the bedside, combines inspired design, technical innovation and precise craftsmanship. Electrospinning and additive manufacturing are separate approaches to manufacturing scaffolds for a variety of tissue engineering applications. A need to accurately control the spatial distribution of pores within scaffolds has recently resulted in combining the two processing methods, to overcome shortfalls in each technology. This review describes where electrospinning and additive manufacturing are used together to generate new porous structures for biological applications.

Recent advances in dermal wound healing: biomedical device approaches

Successful repair of wounds and tissues remains a major healthcare and biomedical challenge in the 21st Century. In particular, chronic wounds often lead to loss of functional ability, increased pain and decreased quality of life, and can be a burden on carers and health-system resources. Advanced healing therapies employing biological dressings, skin substitutes, growth factor-based therapies and synthetic acellular matrices, all of which aim to correct irregular and dysfunctional cellular pathways present in chronic wounds, are becoming more popular. This review focuses on recent advances in biologically inspired devices for wound healing and includes a commentary on the challenges facing the regulatory governance of such products.

Poly(2‐oxazoline) Hydrogel Monoliths via Thiol‐ene Coupling

Copoly(2-oxazoline)s, prepared by the cationic ring-opening polymerization of 2-(dec-9-enyl)-2-oxazoline with either 2-methyl-2-oxazoline or 2-ethyl-2-oxazoline, are crosslinked with small dithiol molecules under UV irradiation to form homogeneous networks. In situ monitoring of the crosslinking reaction by photo-rheology reveals the formation of soft gels within minutes. The degree of swelling in water is tunable based on the hydrophilicity of the starting macromers and the proportion of alkene side arms present. Furthermore, degradable hydrogels are prepared based on incorporation of a hydrolytically cleavable dithiol crosslinker. The rapid synthesis of the macromers and mild crosslinking conditions make these materials ideal for future biomaterial applications.

Poly(2-oxazoline) hydrogels for controlled fibroblast attachment

Currently there is a lack of choice when selecting synthetic materials with the cell-instructive properties demanded by modern biomaterials. The purpose of this study was to investigate the attachment of cells onto hydrogels prepared from poly(2-oxazoline)s selectively functionalized with cell adhesion motifs. A water-soluble macromer based on the microwave-assisted cationic ring-opening polymerization of 2-methyl-2-oxazoline and 2-(dec-9-enyl)-2-oxazoline was functionalized with the peptide CRGDSG or controls using thiol-ene photochemistry followed by facile cross-linking in the presence of a dithiol cross-linker. The growth of human fibroblasts on the hydrogel surfaces was dictated by the structure and amount of incorporated peptide. Controls without any peptide showed resistance to cellular attachment. The benignity of the cross-linking conditions was demonstrated by the incorporation of fibroblasts within the hydrogels to produce three-dimensional cell-polymer constructs.

Chitosan–collagen scaffolds with nano/microfibrous architecture for skin tissue engineering

In this study, a hierarchical nano/microfibrous chitosan/collagen scaffold that approximates structural and functional attributes of native extracellular matrix has been developed for applicability in skin tissue engineering. Scaffolds were produced by electrospinning of chitosan followed by imbibing of collagen solution, freeze-drying, and subsequent cross-linking of two polymers. Scanning electron microscopy showed formation of layered scaffolds with nano/microfibrous architechture. Physicochemical properties of scaffolds including tensile strength, swelling behavior, and biodegradability were found satisfactory for intended application. 3T3 fibroblasts and HaCaT keratinocytes showed good in vitro cellular response on scaffolds thereby indicating the matrices, cytocompatible nature. Scaffolds tested in an ex vivo human skin equivalent wound model, as a preliminary alternative to animal testing, showed keratinocyte migration and wound re-epithelization-a prerequisite for healing and regeneration. Taken together, the herein proposed chitosan/collagen scaffold, shows good potential for skin tissue engineering.

Attenuation of protease activity in chronic wound fluid with bisphosphonate-functionalised hydrogels

Chronic ulcers are an important and costly medical issue, imposing considerable pain, reduced mobility and decreased quality of life. The common pathology in these chronic wounds is excessive proteolytic activity, resulting in degradation of key factors critical to the ulcers ability to heal. Matrix metalloproteinases (MMPs), a large family of zinc-dependent endopeptidases, have been shown to have increased activity in chronic wound fluid (CWF), with many authors suggesting that they need to be inhibited for the ulcer to heal. The studies we report here show that the excessive MMP activity in CWF can be inhibited with the bisphosphonate alendronate, in the form of a sodium salt, a functionalised analogue, and tethered to a poly(2-hydroxy methacrylate) (PHEMA) hydrogel. Furthermore, these functionalised alendronate hydrogels appear to be biologically inert as assessed in a three-dimensional ex vivo human skin equivalent model. Together, these results highlight the potential use of a tethered MMP inhibitor to inhibit protease activity in wound fluid. This approach may improve wound healing as it still allows MMPs to remain active in the upper cellular layers of the ulcer bed where they perform vital roles in wound healing; thus may offer an attractive new device-orientated wound therapy.

Scaffolds for Growth Factor Delivery as Applied to Bone Tissue Engineering

There remains a substantial shortfall in the treatment of severe skeletal injuries. The current gold standard of autologous bone grafting from the same patient has many undesirable side effects associated such as donor site morbidity. Tissue engineering seeks to offer a solution to this problem. The primary requirements for tissue-engineered scaffolds have already been well established, and many materials, such as polyesters, present themselves as potential candidates for bone defects; they have comparable structural features, but they often lack the required osteoconductivity to promote adequate bone regeneration. By combining these materials with biological growth factors, which promote the infiltration of cells into the scaffold as well as the differentiation into the specific cell and tissue type, it is possible to increase the formation of new bone. However due to the cost and potential complications associated with growth factors, controlling the rate of release is an important design consideration when developing new bone tissue engineering strategies. This paper will cover recent research in the area of encapsulation and release of growth factors within a variety of different polymeric scaffolds.

Determination of molecular weight distributions of novolac resins by gel permeation chromatography

The number- and weight-average molecular weigths of several statistical and high ortho novolac resins were determined using gel permeation chromatography (GPC). The standards used were pure compounds having between 2 and 12 phenol units bridged via methylene linkages. Three series of compounds were studied: (i) those with methylene linkages substituted in only the ortho positions relative to the phenolic hydroxyl group; (ii) those in which all para positions, together with sufficient ortho positions, were used to synthesize the compounds; and (iii) those in which the methylene linkages were substituted at a mixture of ortho and para positions. Such compounds, having known molecular architecture and units similar to the segments of industrial novolac resins, provide for a more exact measurement of the molecular weight than do the commonly used poly(styrene) standards. Using these new standards the number average molecular weights of the resins determined by GPC were in good agreement with the average molecular weight obtained by 1H-NMR spectra of the resins, particularly for low molecular weight resins. GPC analysis of higher molecular weight resins tends to underestimate the molecular weights because of complications introduced by hydrogen bonding.