Tiziano Tealdo

Immediate function with fixed implant-supported maxillary dentures: A 12-month pilot study

STATEMENT OF PROBLEM Immediate occlusal loading of dental implants in the edentulous mandible has proven to be an effective, reliable, and predictable procedure. There is little long-term data available on similar treatments in the edentulous maxilla. PURPOSE The purpose of this study was to evaluate the 12-month implant survival after immediate loading of 4 to 6 implants with fixed screw-retained prostheses in edentulous maxillae. MATERIAL AND METHODS Twenty-one patients, edentulous or with remaining teeth to be extracted in the maxilla, received 4 to 6 implants (n=111). The patients were restored with screw-retained fixed provisional prostheses supported by palladium-alloy frameworks within 24 hours after surgery. Insertion torques for implants were at least 40 Ncm. Implants, grouped as tapered or cylindrical screws, were placed in healed bone or extraction sockets. Implants were also classified as either vertical or off-angle. Definitive prostheses were placed after a mean healing time of 18 weeks. Radiographic examinations were made at the time of placement of provisional prostheses and 12 months later. Between-groups bone resorption was compared using 2-way ANOVA (alpha=.05). RESULTS The mean follow-up time for all of the patients was 20 months (range, 13 to 28 months). The cumulative implant survival rate at the 12-month follow-up visits (after surgery) was 92.8%; the prostheses survival rate was 100%. No significant differences were found between the survival of tapered or cylindrical screw-type implants placed in postextraction sockets versus those in healed edentulous sites or between vertical and off-angle placed implants. Eight implants failed during the first 3 months, 5 of which were the most distal implants. The mean reduction in marginal bone height over the 12-month observation period was 0.84 mm (CI 95%; 0.68-0.99 mm). CONCLUSIONS In this study with 12-month follow-up, 4 to 6 implants were sufficient to successfully support fixed implant screw-retained prostheses in the edentulous maxillae of 21 patients.

Tilted Implants in the Immediate Loading Rehabilitation of the Maxilla: A Systematic Review

Tilted implants have been proposed as an alternative to traditional protocols in the rehabilitation of edentulous maxillae. The aim of this meta-analysis was to evaluate the outcomes of upright and tilted implants supporting full-arch fixed dentures for the immediate rehabilitation of edentulous maxillae, after at least 1 year of function. An electronic search of databases and a hand search of relevant journals in oral implantology were performed according to PRISMA guidelines through August, 2011. The literature search yielded 1,069 articles. Eleven articles were available for analysis. A total of 1,623 implants (778 tilted, 845 upright) were inserted into the maxillae of 324 patients. Seventeen tilted (2.19%) and 16 upright implants (1.89%) failed during the first year. No significant difference in failure rate was found between tilted and upright implants (p value = 0.52). Marginal bone level results were obtained from 6 studies. A non-significant mean difference between tilted and upright implants was found with regard to bone loss. Tilted implants demonstrated a favorable short-term prognosis in full-arch immediate loading rehabilitations of the maxillae. Randomized long-term trials are needed to better elucidate long-term success of tilted vs. upright-positioned implants.

Peri-implantitis: a systematic review of recently published papers.

PURPOSE This systematic review considers possible etiologic factors and definitions of peri-implantitis as reported in the recent literature. MATERIALS AND METHODS An electronic search of databases plus a hand search of the most relevant journals published between January 2005 and September 2012 were performed. RESULTS The electronic and manual searches yielded 640 and 14 titles, respectively. From the independent doublecheck of the titles and abstracts, 24 full texts were downloaded (18 clinical studies and 6 animal studies). After reading the full texts, 10 articles (4 clinical studies and 6 animal studies) were included in this review. None of the human articles selected provided sufficient evidence to address the research question, and no human clinical evidence is available to support a cause-effect relationship between peri-implantitis and bacterial accumulation and/or occlusal overload. The animal literature is also not unanimous regarding a specific peri-implantitis etiology. However, a correlation between periodontitis and smoking histories was cited as contributing to a higher incidence of peri-implantitis. CONCLUSION The available scientific literature is characterized by an absence of a unanimous consensus regarding the etiology of peri-implantitis and its specific relationship to periodontitis. Furthermore, both the choice of the term peri-implantitis and its definition remain controversial.

Immediate Versus Delayed Loading of Dental Implants in Edentulous Patients’ Maxillae:: A 6-Year Prospective Study

PURPOSE This study compared the surgical protocol efficacy of immediate and delayed implant loading in edentulous maxillae opposed by natural or restored mandibular dentitions over an observational period of 6 years or longer. The selected outcome determinants included individual implant survival data, progressive measurements of peri-implant bone resorption, prosthodontic survival and success data, and report of complications. MATERIALS AND METHODS A convenience sample of 49 patients requiring fixed implant-supported maxillary prostheses was split into two groups. The test group (34 patients) was treated according to the Columbus Bridge Protocol, which prescribes the insertion of four to six implants, including distally tilted implants, and load within 24 hours. The control group (15 patients) was treated via a two-stage surgical protocol of 6 to 9 straight implants that were loaded a mean 8.75 months after stage-one implant surgery. Two hundred sixty implants (test: n = 163, control: n = 97) were placed, and all subjects were ultimately treated with screw-retained full-arch prostheses. RESULTS Two patients dropped out (one in the test group and one in the control group) by the time of the scheduled sixth annual visit. The other patients were followed up for 75.2 months (range: 72 to 90 months). At the 6-year follow-up, no differences in implant cumulative survival rates were found between groups. Significantly less bone loss was found in the test group (mean: 1.62 mm) compared with the control group (mean: 2.44 mm). All of the original prostheses were maintained throughout the studys observation period and were functioning satisfactorily at each patients last recall appointment. CONCLUSION Patients who received immediate and delayed implant loading in their edentulous maxillae demonstrated similar survival outcomes. However, less marginal bone loss was recorded around the immediately loaded implants over the studys 6-year follow-up period.

Shock Absorption Capacity of Restorative Materials for Dental Implant Prostheses: An In Vitro Study

PURPOSE To measure the vertical occlusal forces transmitted through crowns made of different restorative materials onto simulated peri-implant bone. MATERIALS AND METHODS The study was conducted using a masticatory robot that is able to reproduce the mandibular movements and forces exerted during mastication. During robot mastication, the forces transmitted onto the simulated peri-implant bone were recorded using nine different restorative materials for the simulated single crown: zirconia, two glass-ceramics, a gold alloy, three composite resins, and two acrylic resins. Three identical sample crowns for each material were used. Each crown was placed under 100 masticatory cycles, occluding with the flat upper surface of the robot to evaluate the vertical forces transmitted. Two-way analysis of variance was used. Alpha was set at .05. RESULTS The statistical evaluation of the force peaks recorded on the vertical z-axis showed mean values of 641.8 N for zirconia; 484.5 N and 344.5 N, respectively, for the two glass-ceramics; 344.8 N for gold alloy; 293.6 N, 236 N, and 187.4 N, respectively, for the three composite resins; and 39.3 N and 28.3 N, respectively, for the two acrylic resins. Significant differences were found between materials (P < .0001), except for the comparison between gold alloy and one of the glass-ceramics. CONCLUSION Composite and above all acrylic resin crowns were more able to absorb shock from occlusal forces than crowns made of zirconia, ceramic material, or gold alloy.

Factors affecting the outcome in the immediate loading rehabilitation of the maxilla: a 6-year prospective study.

This prospective study reports the 6-year outcomes for patients rehabilitated with an immediate loading protocol of the maxilla (Columbus Bridge Protocol). In this study, 164 implants were inserted in 37 patients and loaded within 24 to 36 hours. Four implants failed during the first 6 months. At the 6-year follow-up, a mean bone loss of 1.52 mm was found. Significantly (P < .0083) less bone loss was found next to tapered implants compared with cylindric implants and next to machined collar implants compared with full acid-etched implants (P < .0083). No significant differences in bone loss were found in tilted versus upright implants or in mesial versus distal implant sites. In addition, there were no significant differences relating to either the degree of abutment angulation or the reason for tooth loss.

A Luting Technique for Passive Fit of Implant-Supported Fixed Dentures

Several factors contribute to distortion of implant prostheses during fabrication and could prevent passive, accurate adaptation between implants and implant frameworks. The misfit between implants and restorative components may be significant and possibly lead to biologic or mechanical complications. The aim of this article is to describe a laboratory luting technique used to lute implant cylinders to metal frameworks in implant prostheses. This technique provides accurate, passive fits. According to this technique, titanium implant cylinders provided with corresponding external castable cylinders are used. Implant cylinders are screwed into the analogs in the master cast while the castable cylinders on top are splinted together using castable resin to realize a castable resin pattern. After casting, the framework is adjusted and cemented to the titanium cylinders on the master cast. Due to its ease and quickness of use and clinical efficiencies, this technique is deemed particularly useful in immediate loading rehabilitations.

Effect of Framework in an Implant-Supported Full-Arch Fixed Prosthesis: 3D Finite Element Analysis.

PURPOSE The aim of this study was to analyze through a three-dimensional finite element analysis (3D-FEA) stress distribution on four implants supporting a full-arch implant-supported fixed prosthesis (FFP) using different prosthesis designs. MATERIALS AND METHODS A 3D edentulous maxillary model was created and four implants were virtually placed into the maxilla and splinted, simulating an FFP without framework, with a cast metal framework, and with a carbon fiber framework. An occlusal load of 150 N was applied, stresses were transmitted into peri-implant bone, and prosthodontic components were recorded. RESULTS 3D-FEA revealed higher stresses on the implants (up to +55.16%), on peri-implant bone (up to +56.93%), and in the prosthesis (up to +70.71%) when the full-acrylic prosthesis was simulated. The prosthesis with a carbon fiber framework showed an intermediate behavior between that of the other two configurations. CONCLUSION This study suggests that the presence of a rigid framework in full-arch fixed prostheses provides a better load distribution that decreases the maximum values of stress at the levels of implants, prosthesis, and maxillary bone.

Effects of pulsed electromagnetic fields on swelling and pain after implant surgery: a double-blind, randomized study

The aim of this split-mouth, double-blind, randomized study was to determine whether pulsed electromagnetic field therapy (PEMF) can improve swelling and the management of pain after full-arch immediate loading implant surgery. Eleven patients were selected for the study. Each patient received four distal tilted implants in the upper or lower jaw and underwent full-arch immediate loading rehabilitation. After surgery, two PEMF devices were applied to each patient, one on each cheek. In a random manner, one of these PEMF devices was switched on (test side); the other served as a placebo (control side). Forty-eight hours after surgery clinicians estimated postoperative swelling through photographic documentation, comparing the condition before and after surgery, while pain was assessed using a verbal rating scale. The patients degree of comfort in relation to the PEMF devices was analyzed by questionnaire using a numerical rating scale. No statistically significant difference was observed between the test and control sides for swelling or pain (P>0.05). Most of the patients did not present swelling or pain at 48h after surgery, regardless of whether the PEMF device was activated or not. Various outcomes were found in the comfort evaluation. Within the limitations of this study, PEMF does not reduce postoperative swelling or pain after implant surgery.

Carbon fibre versus metal framework in full-arch immediate loading rehabilitations of the maxilla - a cohort clinical study

Frameworks made of carbon fibre-reinforced composites (CFRC) seem to be a viable alternative to traditional metal frameworks in implant prosthodontics. CFRC provide stiffness, rigidity and optimal biocompatibility. The aim of the present prospective study was to compare carbon fibre frameworks versus metal frameworks used to rigidly splint implants in full-arch immediate loading rehabilitations. Forty-two patients (test group) were rehabilitated with full-arch immediate loading rehabilitations of the upper jaw (total: 170 implants) following the Columbus Bridge Protocol with four to six implants with distal tilted implants. All patients were treated with resin screw-retained full-arch prostheses endowed with carbon fibre frameworks. The mean follow-up was 22 months (range: 18-24). Differences in the absolute change of bone resorption over time between the two implant sides (mesial and distal) were assessed performing a Mann-Whitney U-test. The outcomes were statistically compared with those of patients rehabilitated following the same protocol but using metal frameworks (control group: 34 patients with 163 implants - data reported in Tealdo, Menini, Bevilacqua, Pera, Pesce, Signori, Pera, Int J Prosthodont, 27, 2014, 207). Ten implants failed in the control group (6·1%); none failed in the test group (P = 0·002). A statistically significant difference in the absolute change of bone resorption around the implants was found between the two groups (P = 0·004), with greater mean peri-implant bone resorption in the control group (1 mm) compared to the test group (0·8 mm). Carbon fibre frameworks may be considered as a viable alternative to the metal ones and showed less marginal bone loss around implants and a greater implant survival rate during the observation period.