U. Neumann

Ten-micron instrument MIDI: getting ready for observations on the VLTI

The mid-infrared interferometric instrument MIDI is currently undergoing testing in preparation for commissioning on the Very Large Telescope Interferometer VLTI at the end of this year 2002. It will perform interferometric observations over the 8 μm - 13 μm wavelength range, with a spatial resolution of 20 milliarcsec, a spectral resolution of up to 250, and an anticipated point source sensitivity of N = 4 mag or 1 Jy for self-fringe tracking, which will be the only observing mode during the first months of operation. We describe the layout of the instrument and the performance during laboratory tests, both for broadband and spectrally resolved observing modes. We also briefly outline the planned guaranteed time observations.

GRAVITY: getting to the event horizon of Sgr A*

We present the second-generation VLTI instrument GRAVITY, which currently is in the preliminary design phase. GRAVITY is specifically designed to observe highly relativistic motions of matter close to the event horizon of Sgr A*, the massive black hole at center of the Milky Way. We have identified the key design features needed to achieve this goal and present the resulting instrument concept. It includes an integrated optics, 4-telescope, dual feed beam combiner operated in a cryogenic vessel; near infrared wavefront sensing adaptive optics; fringe tracking on secondary sources within the field of view of the VLTI and a novel metrology concept. Simulations show that the planned design matches the scientific needs; in particular that 10µas astrometry is feasible for a source with a magnitude of K=15 like Sgr A*, given the availability of suitable phase reference sources.

GRAVITY: a four-telescope beam combiner instrument for the VLTI

GRAVITY is an adaptive optics assisted Beam Combiner for the second generation VLTI instrumentation. The instrument will provide high-precision narrow-angle astrometry and phase-referenced interferometric imaging in the astronomical K-band for faint objects. We describe the wide range of science that will be tackled with this instrument, highlighting the unique capabilities of the VLTI in combination with GRAVITY. The most prominent goal is to observe highly relativistic motions of matter close to the event horizon of Sgr A*, the massive black hole at center of the Milky Way. We present the preliminary design that fulfils the requirements that follow from the key science drivers: It includes an integrated optics, 4-telescope, dual feed beam combiner operated in a cryogenic vessel; near-infrared wavefrontsensing adaptive optics; fringe-tracking on secondary sources within the field of view of the VLTI and a novel metrology concept. Simulations show that 10 μas astrometry within few minutes is feasible for a source with a magnitude of mK = 15 like Sgr A*, given the availability of suitable phase reference sources (mK = 10). Using the same setup, imaging of mK = 18 stellar sources in the interferometric field of view is possible, assuming a full night of observations and the corresponding UV coverage of the VLTI.

MATISSE: perspective of imaging in the mid-infrared at the VLTI

MATISSE is foreseen as a mid-infrared spectro-interferometer combining the beams of up to four UTs/ATs of the Very Large Telescope Interferometer (VLTI) of the European Southern Observatory. The related science case study demonstrates the enormous capability of a new generation mid-infrared beam combiner. MATISSE will constitute an evolution of the two-beam interferometric instrument MIDI. MIDI is a very successful instrument which offers a perfect combination of spectral and angular resolution. New characteristics present in MATISSE will give access to the mapping and the distribution of the material (typically dust) in the circumstellar environments by using a wide mid-infrared band coverage extended to L, M and N spectral bands. The four beam combination of MATISSE provides an efficient UV-coverage : 6 visibility points are measured in one set and 4 closure phase relations which can provide aperture synthesis images in the mid-infrared spectral regime.

Test performance of the PARSEC laser system

The PARSEC laser system is designed for the VLT Laser Guide Star Facility to deliver a high power cw laser beam at 589nm, in order to create an artificial guide star in the mesospheric Sodium layer. The laser consists of a resonant, dye based power amplifier which is injection seeded with 589nm, single frequency radiation from a master oscillator. We report on the performance of the system both during the European Acceptance tests, and that which has been achieved in the laboratory. The maximum power we have obtained amounts to 20W cw laser light in a single mode and a single frequency at 589nm. With a beam quality of M2 of 1.05-1.15 and a long term stability without manual intervention, the laser suits all the demands for operation at the VLT.

First light of the ESO laser guide star facility

Two teams of scientists and engineers at Max Planck Institut fuer Extraterrestrische Physik and at the European Southern Observatory have joined forces to design, build and install the Laser Guide Star Facility for the VLT. The Laser Guide Star Facility has now been completed and installed on the VLT Yepun telescope at Cerro Paranal. In this paper we report on the first light and first results from the Commissioning of the LGSF.

The VLT laser guide star facility

We report on the ongoing VLT Laser Guide Star Facility project, which will allow the ESO UT4 telescope to produce an artificial reference star for the Adaptive Optics systems NAOS-CONICA and SINFONI. A custom developed dye laser producing >10W CW at 589nm is installed on-board of the UT4 telescope, then relayed by means of a single mode optical fiber behind the secondary mirror, where a 500mm diameter lightweight, f/1 launch telescope is projecting the laser beam at 90 km altitude. We described the design tradeoffs and provide some details of the chosen subsystems. This paper is an update including subsystems results, to be read together with our previous paper on LGSF design description.

GRAVITY Coudé Infrared Adaptive Optics (CIAO) system for the VLT Interferometer

GRAVITY is a second generation instrument for the VLT Interferometer, designed to enhance the near-infrared astrometric and spectro-imaging capabilities of VLTI. Combining beams from four telescopes, GRAVITY will provide an astrometric precision of order 10 micro-arcseconds, imaging resolution of 4 milli-arcseconds, and low and medium resolution spectro-interferometry, pushing its performance far beyond current infrared interferometric capabilities. To maximise the performance of GRAVITY, adaptive optics correction will be implemented at each of the VLT Unit Telescopes to correct for the e_ects of atmospheric turbulence. To achieve this, the GRAVITY project includes a development programme for four new wavefront sensors (WFS) and NIR-optimized real time control system. These devices will enable closed-loop adaptive correction at the four Unit Telescopes in the range 1.4-2.4 μm. This is crucially important for an e_cient adaptive optics implementation in regions where optically bright references sources are scarce, such as the Galactic Centre. We present here the design of the GRAVITY wavefront sensors and give an overview of the expected adaptive optics performance under typical observing conditions. Bene_ting from newly developed SELEX/ESO SAPHIRA electron avalanche photodiode (eAPD) detectors providing fast readout with low noise in the near-infrared, the AO systems are expected to achieve residual wavefront errors of 400 nm at an operating frequency of 500 Hz.≤

Design of PARSEC, the VLT laser

For the successful operation of laser referenced adaptive optic systems very powerful lasers for the creation of sodium guide stars are necessary. Here we introduce the design of PARSEC, the cw sodium-line laser for the VLT, and present out first laboratory results on the performance of the system. So far we have achieved a stable output power of 12.8W in a single spatial mode and a single frequency.

Detection of the gravitational redshift in the orbit of the star S2 near the Galactic centre massive black hole

This is the author accepted manuscript. the final version is available from EDP Sciences via the DOI in this record