Umut Orguner

A Gaussian mixture PHD filter for extended target tracking

In extended target tracking, targets potentially produce more than one measurement per time step. Multiple extended targets are therefore usually hard to track, due to the resulting complex data association. The main contribution of this paper is the implementation of a Probability Hypothesis Density (PHD) filter for tracking of multiple extended targets. A general modification of the PHD filter to handle extended targets has been presented recently by Mahler, and the novelty in this work lies in the realisation of a Gaussian mixture PHD filter for extended targets. Furthermore, we propose a method to easily partition the measurements into a number of subsets, each of which is supposed to contain measurements that all stem from the same source. The method is illustrated in simulation examples, and the advantage of the implemented extended target PHD filter is shown in a comparison with a standard PHD filter.

Low Order PWM Inverter Harmonics Contributions to the Inverter-Fed Induction Machine Fault Diagnosis

In this paper, the effects of inverter harmonics on motor current fault signatures are studied in detail. It is theoretically and experimentally shown that the fault signatures caused by the inverter harmonics are similar and comparable to those generated by the fundamental harmonic on the line current. Theoretically-derived extended relations including bearing fault, eccentricity, and broken rotor bar relations are found to match experimental results. Furthermore, it is observed and reported that the asymmetries on the rotor caused by broken rotor bars increase the amplitude of even harmonics. To confirm these claims, bearing, eccentricity, and broken rotor bar faults are tested and the line current spectrum of each faulty motor is compared with the healthy one. The proposed additional fault data are expected to contribute positively to the inverter-fed motor fault decision making algorithms.

Fingerprinting Localization in Wireless Networks Based on Received-Signal-Strength Measurements: A Case Study on WiMAX Networks

This paper considers the problem of fingerprinting localization in wireless networks based on received-signal-strength (RSS) observations. First, the performance of static localization using power maps (PMs) is improved with a new approach called the base-station-strict (BS-strict) methodology, which emphasizes the effect of BS identities in the classical fingerprinting. Second, dynamic motion models with and without road network information are used to further improve the accuracy via particle filters. The likelihood-calculation mechanism proposed for the particle filters is interpreted as a soft version (called BS-soft) of the BS-strict approach applied in the static case. The results of the proposed approaches are illustrated and compared with an example whose data were collected from a WiMAX network in a challenging urban area in the capitol city of Brussels, Belgium.

A Simple Real-Time Fault Signature Monitoring Tool for Motor-Drive-Embedded Fault Diagnosis Systems

The reference frame theory constitutes an essential aspect of electric machine analysis and control. In this study, apart from the conventional applications, it is reported that the reference frame theory approach can successfully be applied to real-time fault diagnosis of electric machinery systems as a powerful toolbox to find the magnitude and phase quantities of fault signatures with good precision as well. The basic idea is to convert the associated fault signature to a dc quantity, followed by the computation of the signals average in the fault reference frame to filter out the rest of the signal harmonics, i.e., its ac components. As a natural consequence of this, neither a notch filter nor a low-pass filter is required to eliminate fundamental component or noise content. Since the incipient fault mechanisms have been studied for a long time, the motor fault signature frequencies and fault models are very well-known. Therefore, ignoring all other components, the proposed method focuses only on certain fault signatures in the current spectrum depending on the examined motor fault. Broken rotor bar and eccentricity faults are experimentally tested online using a TMS320F2812 digital signal processor (DSP) to prove the effectiveness of the proposed method. In this application, only the readily available drive hardware is used without employing additional components such as analog filters, signal conditioning board, external sensors, etc. As the motor drive processing unit, the DSP is utilized both for motor control and fault detection purposes, providing instantaneous fault information. The proposed algorithm processes the measured data in real time to avoid buffering and large-size memory needed in order to enhance the practicability of this method. Due to the short-time convergence capability of the algorithm, the fault status is updated in each second. The immunity of the algorithm against non-ideal cases such as measurement offset errors and phase unbalance is theoretically and experimentally verified. Being a model-independent fault analyzer, this method can be applied to all multiphase and single-phase motors.

Phase-Sensitive Detection of Motor Fault Signatures in the Presence of Noise

In this paper, a digital signal processor-based phase-sensitive motor fault signature detection technique is presented. The implemented method has a powerful line current noise suppression capability while detecting the fault signatures. Because the line current of inverter-driven motors involve low-order harmonics, high-frequency switching disturbances, and the noise generated by harsh industrial environment, the real-time fault analyses yield erroneous or fluctuating fault signatures. This situation becomes a significant problem when the signal-to-noise ratio of the fault signature is quite low. It is theoretically and experimentally shown that the proposed method can determine the normalized magnitude and phase information of the fault signatures even in the presence of noise, where the noise amplitude is several times higher than the signal itself. Since it has low computational burden, the developed algorithm is embedded to the motor control program without degrading drive performance. Therefore, it is implemented without any additional cost using readily available drive processor and current sensors.

Simple Derivative-Free Nonlinear State Observer for Sensorless AC Drives

In this paper, a new Kalman filtering technique, unscented Kalman filter (UKF), is utilized both experimentally and theoretically as a state estimation tool in field-oriented control (FOC) of sensorless ac drives. Using the advantages of this recent derivative-free nonlinear estimation tool, rotor speed and dq-axis fluxes of an induction motor are estimated only with the sensed stator currents and voltages information. In order to compare the estimation performances of the extended Kalman filter (EKF) and UKF explicitly, both observers are designed for the same motor model and run with the same covariance matrices under the same conditions. In the simulation results, it is shown that UKF, whose several intrinsic properties suggest its use over EKF in highly nonlinear systems, has more satisfactory rotor speed and flux estimates, which are the most critical states for FOC. These simulation results are supported with experimental results

An Extended Target CPHD Filter and a Gamma Gaussian Inverse Wishart Implementation

This paper presents a cardinalized probability hypothesis density (CPHD) filter for extended targets that can result in multiple measurements at each scan. The probability hypothesis density (PHD) filter for such targets has been derived by Mahler, and different implementations have been proposed recently. To achieve better estimation performance this work relaxes the Poisson assumptions of the extended target PHD filter in target and measurement numbers. A gamma Gaussian inverse Wishart mixture implementation, which is capable of estimating the target extents and measurement rates as well as the kinematic state of the target, is proposed, and it is compared to its PHD counterpart in a simulation study. The results clearly show that the CPHD filter has a more robust cardinality estimate leading to smaller OSPA errors, which confirms that the extended target CPHD filter inherits the properties of its point target counterpart.

Robust Tracking in Cellular Networks Using HMM Filters and Cell-ID Measurements

A localization algorithm based on cell identification (Cell-ID) information is proposed. Instead of building the localization decisions only on the serving base station, all the detected Cell-IDs (serving or nonserving) by the mobile station are utilized. The statistical modeling of user motion and the measurements are done via a hidden Markov model (HMM), and the localization decisions are made with maximum a posteriori estimation criterion using the posterior probabilities from an HMM filter. The results are observed and compared with standard alternatives on an example whose data were collected from a worldwide interoperability for microwave access network in a challenging urban area in the Brussels capitol city.

Brief paper: Risk-sensitive filtering for jump Markov linear systems

In this paper, a risk-sensitive multiple-model filtering algorithm is derived using the reference probability methods. First, the approximation of the interacting multiple-model (IMM) algorithm is identified in the reference probability domain. Then, the same type of approximation is used to derive the finite-dimensional risk-sensitive filtering algorithm. The derived algorithm reduces to the IMM filter when the risk-sensitive parameter goes to zero and reduces to the risk-sensitive filter for linear Gauss-Markov systems when the number of models is unity. The algorithm performs better in a simulated uncertain parameter scenario than the IMM filter.

A comparative study on non-linear state estimators applied to sensorless AC drives: MRAS and Kalman filter

In this paper, two different nonlinear estimators applied to sensorless AC drives, Kalman filtering techniques (EKF and UKF) and model reference adaptive system (back emf and reactive power models), are discussed and compared to each other. Both of the observer types are studied and analyzed both experimentally and theoretically. In order to compare the observers precisely, the observers are tested under the identical conditions.