V. Tioukov

Hardware performance of a scanning system for high speed analysis of nuclear emulsions

The use of nuclear emulsions in very large physics experiments is now possible thanks to the recent improvements in the industrial production of emulsions and to the development of fast automated microscopes. In this paper the hardware performances of the European Scanning System (ESS) are described. The ESS is a very fast automatic system developed for the mass scanning of the emulsions of the OPERA experiment, which requires microscopes with scanning speeds of � 20 cm 2 =h in an emulsion volume of 44mm thickness.

Measurement of charm production in neutrino charged-current interactions

The nuclear emulsion target of the CHORUS detector was exposed to the wide-band neutrino beam of the CERN SPS of 27 GeV average neutrino energy from 1994 to 1997. In total, about 100 000 charged-current (CC) neutrino interactions with at least one identified muon were located in the emulsion target and fully reconstructed, using newly developed automated scanning systems. Charmed particles were searched for by a program recognizing particle decays. The observation of the decay in nuclear emulsion makes it possible to select a sample with very low background and minimal kinematical bias. In all, 2013 CC interactions with a charmed hadron candidate in the final state were selected and confirmed through visual inspection. The charm production rate induced by neutrinos relative to the CC cross-section is measured to be σ(νμN→μ−CX)/σ(CC)=(5.75 ± 0.32(stat)±0.30(syst))%. The charm production cross-section as a function of neutrino energy is also obtained. The results are in good agreement with previous measurements. The charm-quark hadronization produces the following charmed hadrons with relative fractions (in %): fD0=43.7±4.5, fΛc+=19.2±4.2, fD+=25.3±4.2 and fDs+=11.8±4.7.

Momentum measurement by the angular method in the Emulsion Cloud Chamber

We present the first automated momentum measurement in an Emulsion Cloud Chamber, consisting of multiple sandwiches of lead plates and nuclear emulsion sheets. The measurement is based on the detection of the multiple Coulombscattering analysed by the so-called angular method. A 3 X0 chamber was exposed to 2, 3 and 4 GeV=c p � : A pion momentum resolution of 36% at 4 GeV=c; 35% at 3 GeV=c and 28% for 2 GeV=c was achieved.

Track reconstruction in the emulsion-lead target of the OPERA experiment using the ESS microscope

The OPERA experiment, designed to conclusively prove the existence of ????? oscillations in the atmospheric sector, makes use of a massive lead-nuclear emulsion target to observe the appearance of ??s in the CNGS ?? beam. The location and analysis of the neutrino interactions in quasi real-time required the development of fast computer-controlled microscopes able to reconstruct particle tracks with sub-micron precision and high efficiency at a speed of ~20 cm2/h. This paper describes the performance in particle track reconstruction of the European Scanning System, a novel automatic microscope for the measurement of emulsion films developed for OPERA.

Electron/pion separation with an emulsion cloud chamber by using a neural network.

We have studied the performance of a new algorithm for electron/pion separation in an Emulsion Cloud Chamber (ECC) made of lead and nuclear emulsion films. The software for separation consists of two parts: a shower reconstruction algorithm and a Neural Network that assigns to each reconstructed shower the probability to be an electron or a pion. The performance has been studied for the ECC of the OPERA experiment [1]. The e/π separation algorithm has been optimized by using a detailed Monte Carlo simulation of the ECC and tested on real data taken at CERN (pion beams) and at DESY (electron beams). The algorithm allows to achieve a 90% electron identification efficiency with a pion misidentification smaller than 1% for energies higher than 2 GeV.

Readout technologies for directional WIMP Dark Matter detection

The measurement of the direction of WIMP-induced nuclear recoils is a compelling but technologically challenging strategy to provide an unambiguous signature of the detection of Galactic dark matter. Most directional detectors aim to reconstruct the dark-matter-induced nuclear recoil tracks, either in gas or solid targets. The main challenge with directional detection is the need for high spatial resolution over large volumes, which puts strong requirements on the readout technologies. In this paper we review the various detector readout technologies used by directional detectors. In particular, we summarize the challenges, advantages and drawbacks of each approach, and discuss future prospects for these technologies.

Emulsion Cloud Chamber technique to measure the fragmentation of a high-energy carbon beam

Beams of Carbon nuclei are used or planned to be used in various centers for cancer treatment around the world because of their therapeutic advantages over proton beams. The knowledge of the fragmentation of Carbon nuclei when they interact with the human body is important to evaluate the spatial profile of their energy deposition in the tissues, hence the damage to the tissues neighboring the tumor. In this respect, the identification of the fragmentation products is a key element. We present in this paper the charge measurement of about 3000 fragments produced by the interaction of 12C nuclei with an energy of 400 MeV/nucleon in a detector simulating the density of the human body. The nuclear emulsion technique is used, by means of the so-called Emulsion Cloud Chamber. In order to achieve the large dynamical range required for the charge measurement, the recently developed techniques of the emulsion controlled fading are used. The nuclear emulsions are inspected using fast automated microscopes recently developed. A charge assignment efficiency of more than 99% is achieved. The separation of Hydrogen, Helium, Lithium, Berillium, Boron and Carbon can be achieved at two standard deviations or considerably more, according to the track length available for the measurement.

High-speed analysis of nuclear emulsion films with the use of dry objective lenses

The extensive use of nuclear emulsions as precise tracking detectors in experimental physics has been made possible due to recent advances in the production of novel emulsion films and to the development of automatic scanning devices. The scanning speed of such systems has exceeded the level of 20 cm2 of emulsion surface per hour. High-speed automatic scanning systems, such as those developed by the OPERA Collaboration, are able to reconstruct particle tracks in nuclear emulsions with excellent accuracy. However, the high-magnification oil immersion objectives used in these systems assume deposition and removal of oil onto and from the emulsion films. This is a major technological obstacle in the automatization of the emulsion feeding to the microscope, as required for large scale use as in the case of the OPERA neutrino oscillation experiment. In order to overcome this problem, an innovative technique of nuclear emulsion films scanning with the use of dry objective lenses has been developed and successfully applied to the experiment.

Further progress for a fast scanning of nuclear emulsions with Large Angle Scanning System

The LASSO (Large Angle Scanning System for OPERA) is a scanning system designed in the framework of the OPERA experiment as a result of several R&Ds aimed to improve the performance of the European Scanning System (ESS) by increasing the scanning speed, the angular acceptance and the efficiency in microtrack reconstruction. The novel Continuous Motion (CM) scanning approach allows to double the ESS nominal speed without any changes in the hardware set-up. The LASSO modular design makes the system easily adaptable to new hardware. The novel microtrack reconstruction algorithm has been developed to be efficient in both standard Stop&Go (SG) and CM modes, performing a number of corrections during the processing like corrections for vibrations, optical distortions, field of view curvature. As an intermediate step it reconstructs silver grains positions inside emulsion layer to make a transition from 2D images to real 3D traces of a charged particle. This allows the algorithm to have no internal limits on the slope of microtracks being equally efficient on all angles. The LASSO has been used for about one year for mass production scanning of emulsion films of OPERA, Muon Radiography and also of films employed to study nuclear fragmentation of ion beams used in medical physics. More than 50000 cm2 of the emulsion surface have been analyzed during this period.

NEWS: Nuclear Emulsions for WIMP Search

Nowadays there is compelling evidence for the existence of dark matter in the Universe. A general consensus has been expressed on the need for a directional sensitive detector to confirm, with a complementary approach, the candidates found in conventional searches and to finally extend their sensitivity beyond the limit of neutrino-induced background. We propose here the use of a detector based on nuclear emulsions to measure the direction of WIMP-induced nuclear recoils. The production of nuclear emulsion films with nanometric grains is established. Several measurement campaigns have demonstrated the capability of detecting sub-micrometric tracks left by low energy ions in such emulsion films. Innovative analysis technologies with fully automated optical microscopes have made it possible to achieve the track reconstruction for path lengths down to one hundred nanometers and there are good prospects to further exceed this limit. The detector concept we propose foresees the use of a bulk of nuclear emulsion films surrounded by a shield from environmental radioactivity, to be placed on an equatorial telescope in order to cancel out the effect of the Earth rotation, thus keeping the detector at a fixed orientation toward the expected direction of galactic WIMPs. We report the schedule and cost estimate for a one-kilogram mass pilot experiment, aiming at delivering the first results on the time scale of six years.