Verónica Pino

Dispersive liquid-liquid microextraction versus single-drop microextraction for the determination of several endocrine-disrupting phenols from seawaters.

Two liquid-phase microextraction procedures: single-drop microextraction (SDME) and dispersive liquid-liquid microextraction (DLLME), have been developed for the determination of several endocrine-disrupting phenols (EDPs) in seawaters, in combination with high-performance liquid chromatography (HPLC) with UV detection. The EDPs studied were bisphenol-A, 4-cumylphenol, 4-tertbutylphenol, 4-octylphenol and 4-n-nonylphenol. The optimized SDME method used 2.5 microL of decanol suspended at the tip of a micro-syringe immersed in 5 mL of seawater sample, and 60 min for the extraction time. The performance of the SDME is characterized for average relative recoveries of 102+/-11%, precision values (RSD)<9.4% (spiked level of 50 ng mL(-1)), and detection limits between 4 and 9 ng mL(-1). The optimized DLLME method used 150 microL of a mixture acetonitrile:decanol (ratio 15.7, v/v), which is quickly added to 5 mL of seawater sample, then subjected to vortex during 4 min and centrifuged at 2000 rpm for another 5 min. The performance of the DLLME is characterized for average relative recoveries of 98.7+/-3.7%, precision values (RSD)<7.2% (spiked level of 20 ng mL(-1)), and detection limits between 0.2 and 1.6 ng mL(-1). The efficiencies of both methods have also been compared with spiked real seawater samples. The DLLME method has shown to be a more efficient approach for the determination of EDPs in seawater matrices, presenting enrichment factors ranging from 123 to 275, average relative recoveries of 110+/-11%, and precision values (RSD)<14%, when using a real seawaters (spiked level of 3.5 ng mL(-1)).

Utilization of a benzyl functionalized polymeric ionic liquid for the sensitive determination of polycyclic aromatic hydrocarbons; parabens and alkylphenols in waters using solid-phase microextraction coupled to gas chromatography-flame ionization detection.

The functionalized polymeric ionic liquid poly(1-(4-vinylbenzyl)-3-hexadecylimidazolium bis[(trifluoromethyl)sulfonyl]imide (poly(VBHDIm(+)NTf(2)(-))) has been used as successful coating in solid-phase microextraction (SPME) to determine a group of fourteen endocrine disrupting chemicals (ECDs), including polycyclic aromatic hydrocarbons (PAHs), alkylphenols, and parabens, in several water samples. The performance of the PIL fiber in direct immersion mode SPME followed by gas chromatography (GC) with flame-ionization detection (FID) is characterized with average relative recoveries higher than 96.1% from deionized waters and higher than 76.7% from drinking bottled waters, with precision values (RSD) lower than 13% for deionized waters and lower than 14% for drinking bottled waters (spiked level of 1 ng mL(-1)), when using an extraction time of 60 min with 20 mL of aqueous sample. Detection limits varied between 9 ng L(-1) and 7 ng mL(-1). A group of real water samples, including drinking waters, well waters, and swimming pool waters, have been analyzed under the optimized conditions. A comparison has also been carried out with the commercial SPME coatings: polydimethylsyloxane (PDMS) 30 μm, and polyacrylate (PA) 85 μm. The functionalized PIL fiber (∼12 μm) demonstrated to be superior to both commercial fibers for the overall group of analytes studied, in spite of its lower coating thickness. A normalized sensitivity parameter is proposed as a qualitative tool to compare among fiber materials, being higher for the poly(VBHDIm(+)NTf(2)(-)) coating. Furthermore, the partition coefficients of the studied analytes to the coating materials have been determined. A quantitative comparison among the partition coefficients also demonstrates the superior extraction capability of the functionalized PIL sorbent coating.

Surfactant solvation effects and micelle formation in ionic liquids

The formation of micelles in 1-butyl-3-methyl imidazolium chloride (BMIM-Cl) and hexafluorophosphate (BMIM-PF6) were explored using different surfactants and the solvation behavior of the new micellar-ionic liquid solutions examined using inverse gas chromatography.

Determination of water pollutants by direct-immersion solid-phase microextraction using polymeric ionic liquid coatings

The determination of a group of eighteen pollutants in waters, including polycyclic aromatic hydrocarbons and substituted phenols, is conducted in direct-immersion solid-phase microextraction (SPME) using the polymeric ionic liquid (PIL) poly(1-vinyl-3-hexadecylimidazolium) bis[(trifluoromethyl)sulfonyl]imide as a novel coating material. The performance of the PIL fiber coating in the developed IL-SPME-gas chromatography (GC)-mass spectrometry (MS) method is characterized by average relative recoveries of 92.5% for deionized waters and 90.8% for well waters, average precision values (as relative standard deviations, RSD%) of 11% for deionized waters and 12% for well waters, using a spiked level of 5 ng mL(-1). The detection limits oscillate from 0.005 ng mL(-1) for fluoranthene to 4.4 ng mL(-1) for 4-chloro-3-methylphenol, when using an extraction time of 60 min with 20 mL of aqueous sample. The extraction capabilities of the PIL fiber have been compared with the commercial SPME coatings: polydimethylsyloxane (PDMS) 30 microm, PDMS 100 microm and polyacrylate (PA) 85 microm. The PIL fiber is superior to the PDMS 30 microm for all analytes studied. A qualitative study was also carried out to compare among the nature of the coating materials by normalizing the coating thickness. The PIL material was shown to be more efficient than the PDMS material for all analytes studied. The PIL coating was also adequate for nonpolar analytes whereas the PA material was more sensitive for polar compounds.

Determination of polycyclic aromatic hydrocarbons in marine sediments by high-performance liquid chromatography after microwave-assisted extraction with micellar media

A simple and rapid method is developed for extraction and determination of polycyclic aromatic hydrocarbons (PAHs) in marine sediments. The procedure was based on the microwave-assisted extraction of PAHs in marine sediment samples using a micellar medium of Polyoxyethylene 10 lauryl ether as extractant. Two-level factorial designs have been used to optimize the microwave extraction process. The analysis of extracts has been carried out by HPLC with UV detection. Fortified sediments gave an average recovery between 85.70 and 100.73%, with a relative standard deviation of 1.77-7.0% for PAHs with a ring number higher than three.

Role of counteranions in polymeric ionic liquid-based solid-phase microextraction coatings for the selective extraction of polar compounds

A polymeric ionic liquid (PIL) poly(1-vinyl-3-hexylimidazolium chloride) (poly(ViHIm(+)Cl⁻)) was designed as a coating material for solid phase microextraction (SPME) to extract polar compounds including volatile fatty acids (VFAs) and alcohols. The extracted analytes were analyzed by using gas chromatography (GC) coupled with flame ionization detection (FID). Extraction parameters of the HS-SPME-GC-FID method, such as ionic strength, extraction temperature, pH and extraction time were optimized. Calibration studies were carried out under the optimized conditions to further evaluate the performance of the PIL-based SPME coating. For comparison purposes, the PIL poly(1-vinyl-3-hexylimidazolium bis[(trifluoromethyl)sulfonyl]imide) (poly(ViHIm(+)NTf₂⁻)) was also used as the SPME coating to extract the same analytes. The results showed that the poly(ViHIm(+)Cl⁻) PIL coating had higher selectivity towards more polar analytes due to the presence of the Cl⁻ anion which provides higher hydrogen bond basicity than the NTf₂⁻ anion. The limits of detection (LODs) determined by the designed poly(ViHIm(+)Cl⁻) PIL coating ranged from 0.02μgL⁻¹ for octanoic acid and decanoic acid and 7.5μgL⁻¹ for 2-nitrophenol, with precision values (as relative standard deviation) lower than 14%. The observed performance of the poly(ViHIm(+)Cl⁻) PIL coating was comparable to previously reported work in which commercial or novel materials were used as SPME coatings. The selectivity of the developed PIL coatings was also evaluated using heptane as the matrix solvent. This work demonstrates that the selectivity of PIL-based SPME coatings can be simply tuned by incorporating different counteranions to the sorbent coating.

The ionic liquid 1-hexadecyl-3-methylimidazolium bromide as novel extracting system for polycyclic aromatic hydrocarbons contained in sediments using focused microwave-assisted extraction.

A method to extract PAHs from sediments is carried out using aqueous solutions containing aggregates of the ionic liquid (IL) 1-hexadecyl-3-methylimidazolium bromide (HDMIm-Br) as the extracting medium. Focused microwave-assisted extraction has been used to accelerate the extraction step, followed by HPLC with fluorescence detection without clean-up steps to remove the IL prior to injection. The method has been applied to certified reference sediment BCR-535 and marine sediments from Tenerife (Canary Islands) with successful results. The optimized method gave average absolute recoveries of 91.1% for six of the seven PAHs studied, with relative standard deviations lower than 10.4%. The overall method is characterized for presenting low extraction times (6min), low amounts of the sediment (0.1g), low amounts of IL (45mM), and low volumes of aqueous extractant solution (9mL). The use of small amounts of both IL and aqueous extractant solution allows the method to be considered environmental-friendly.

Surface-bonded ionic liquid stationary phases in high-performance liquid chromatography--a review.

Ionic liquids (ILs) are a class of ionic, nonmolecular solvents which remain in liquid state at temperatures below 100°C. ILs possess a variety of properties including low to negligible vapor pressure, high thermal stability, miscibility with water or a variety of organic solvents, and variable viscosity. IL-modified silica as novel high-performance liquid chromatography (HPLC) stationary phases have attracted considerable attention for their differential behavior and low free-silanol activity. Indeed, around 21 surface-confined ionic liquids (SCIL) stationary phases have been developed in the last six years. Their chromatographic behavior has been studied, and, despite the presence of a positive charge on the stationary phase, they showed considerable promise for the separation of neutral solutes (not only basic analytes), when operated in reversed phase mode. This aspect points to the potential for truly multimodal stationary phases. This review attempts to summarize the state-of-the-art about SCIL phases including their preparation, chromatographic behavior, and analytical performance.

Exploiting the Versatility of Ionic Liquids in Separation Science: Determination of Low-Volatility Aliphatic Hydrocarbons and Fatty Acid Methyl Esters Using Headspace Solid-Phase Microextraction Coupled to Gas Chromatography

The determination of high-molecular weight aliphatic hydrocarbons and fatty acid methyl esters possessing high boiling points and low vapor pressures was performed using a headspace solid-phase microextraction gas chromatography (HS-SPME-GC) method comprised entirely of ionic liquids (ILs). The method utilizes three independently structurally engineered ILs in which the imparted physical and chemical properties make them compatible with the requirements of each component of the method. Component one is composed of a thermally stable IL solvent used to increase the equilibrium concentration of analytes in the HS, component two is a SPME sorbent coating based on a polymeric ionic liquid (PIL) for the selective HS extraction of analytes, and component three is an IL-based low-bleed GC stationary phase that performs the selective separation of the analytes. The method demonstrates the versatility of ILs within separation science in addition to determining these analytes, for the first time, using HS extraction at elevated temperatures with detection limits ranging from 0.3 to 0.6 mg kg(-1), relative recoveries from 69.9% to 106%, and precision (relative standard deviation for the overall method) from 6.9% to 16%.

Determination of polycyclic aromatic hydrocarbons in seawater by high-performance liquid chromatography with fluorescence detection following micelle-mediated preconcentration.

In this work, the nonionic surfactant polyoxyethylene-10-lauryl ether has been used for the extraction and preconcentration of 14 polycyclic aromatic hydrocarbons, classified as priority pollutants by the US Environmental Protection Agency, from seawater samples. The cloud-point preconcentration previous separation by HPLC and quantification using fluorimetric detection and wavelength programming allow to determine these pollutants with detection limits ranging from 1.0 to 1.5 x 10(2) ng/l with RSDs better than 10.4%. The methodology is evaluated using well-established extraction and preconcentration methods and GC-MS.