Victor G. Mihucz

Leaching of antimony from polyethylene terephthalate (PET) bottles into mineral water.

The Sb leaching from polyethylene terephthalate (PET) package material into 10 different brands of still (non-carbonated) and sparkling (carbonated) Hungarian mineral water purchased in supermarkets was investigated by inductively coupled plasma sector field mass spectrometry (ICP-SF-MS). The Sb concentration measured in PET package materials varied between 210 and 290 mg/kg. Generally, the Sb concentration of still mineral water was lower than that of sparkling in the case of identical storage time. For modelling improper storage conditions, storage time (10-950 days), temperature (22 degrees C-70 degrees C), illumination (dark vs. 23 W daylight lamp for 116 h) as well as bottle volume (0.5, 1.0 and 1.5 L) were taken into consideration. Under certain extreme light and temperature storage conditions, the Sb concentration of some samples exceeded the concentration value of 2 ng/mL. The extent of Sb leaching from the PET recipients of different brands of mineral water can differ by even one order of magnitude in experiments conducted under the same conditions. Thus, the adequate selection of the polymer used for the production of the PET bottle for the solar water disinfection (SODIS) procedure seems to ensure low Sb levels in the water samples.

Recent trends in total reflection X-ray fluorescence spectrometry for biological applications

This review is focused on the application of total reflection X-ray fluorescence (TXRF) spectrometry in the field of biological research. In the last decade, most papers were published by authors who applied laboratory-scale TXRF equipments. The application of synchrotron radiation as excitation source (SR-TXRF) shows a slowly increasing tendency. In the cited papers the micro-, trace and multielement capability of these TXRF techniques was demonstrated in the clinical and medical laboratory practice, as well as in various plant physiological studies. For speciation of elements in biological matrices, the TXRF was used as element specific detector following an off-line separation step (e.g., thin layer chromatography, high performance liquid chromatography), however, these off-line methods are not competitive with the on-line coupled HPLC-inductively coupled plasma mass spectrometry.

Study on the leaching of phthalates from polyethylene terephthalate bottles into mineral water

Carbonated and non-carbonated mineral water samples bottled in 0.5-L, 1.5-L and 2.0-L polyethylene terephthalate (PET) containers belonging to three different water brands commercialized in Hungary were studied in order to determine their phthalate content by gas chromatography-mass spectrometry. Among the six investigated phthalates, diisobutyl phthalate, di-n-butyl-phthalate, benzyl-butyl phthalate and di(2-ethyl-hexyl) phthalate (DEHP) were determined in non-carbonated samples as follows: <3.0 ng L(-1)-0.2 μg L(-1), <6.6 ng L(-1)-0.8 μg L(-1), <6.0 ng L(-1)-0.1 μg L(-1) and <16.0 ng L(-1)-1.7 μg L(-1), respectively. Any of the above-mentioned phthalate esters could be detected in carbonated mineral water samples. DEHP was the most abundant phthalate in the investigated samples. It could be detected after 44 days of storage at 22 °C and its leaching was the most pronounced when samples were stored over 1200 days. Mineral water purchased in PET bottles of 0.5L had the highest phthalate concentrations compared to those obtained for waters of the identical brand bottled in 1.5-L or 2.0-L PET containers due to the higher surface/volume ratio. No clear trend could be established for phthalate leaching when water samples were kept at higher temperatures (max. 60 °C) showing improper storage conditions. Phthalate determination by pyrolysis-gas chromatography/mass spectrometric measurements in the plastic material as well as in the aqueous phase proved the importance of the quality of PET raw material used for the production of the pre-form (virgin vs. polymer containing recycled PET).

Complex forming competition and in-vitro toxicity studies on the applicability of di-2-pyridylketone-4,4,-dimethyl-3-thiosemicarbazone (Dp44mT) as a metal chelator

Di-2-pyridylketone-4,4,-dimethyl-3-thiosemicarbazone (Dp44mT) is a potential candidate in chelation therapy as an iron chelator. This study showed that a combined treatment with 2μM easily available Fe(II), Cu(II) and Zn(II) each and 5μM Dp44mT on eight different cancer cell lines resulted in a 10-40-fold increase in the intracellular Cu content compared to control samples. The uptake of Cu and Cu-dependent cytotoxicity strictly depend on the Cu concentration of the culture medium. Even as low concentration of Dp44mT as 0.1μM can transport high amounts of copper inside the cells. The Cu accumulation and toxicity through Dp44mT can hardly be influenced by Fe. Copper uptake and toxicity triggered by 2μM extracellular Cu(II) and 5μM Dp44mT could not be influenced by Fe(II) extracellular concentrations even 50-times higher than that of Cu(II). A 50-times higher Co(II) extracellular concentration hindered the Cu(II) uptake almost completely and a 10-times higher Co(II) concentration already decreased the Dp44mT-mediated Cu toxicity. Conditional complex stability constant determinations for Dp44mT with Cu(II), Co(II), Fe(II), Ni(II) and Zn(II) revealed that the metal-to-ligand ratio is 1:1 in [Cu(II)Dp44mT] complex, while for Co(II), Fe(II) and Ni(II) is 1:2. The highest stability constant was obtained for Cu(II) (lg β=7.08±0.05) and Co(II) (lg β2=12.47±0.07). According to our results, Dp44mT in combination with Cu is highly toxic in vitro. Therefore, the use of Dp44mT as an iron chelator is limited if biologically available Cu is also present even at low concentrations.

Determination of ethyl carbamate in wine by high performance liquid chromatography

Kinetics of pre-column derivatization with 9-xanthydrol for the determination of ethyl carbamate (EC) in wine by a previous high performance liquid chromatographic method with fluorescence detection was studied and further developed. The life-time of the derivatized product and its excitation/absorption spectra were systematically investigated. Using low acidity (pH=2.5 set by phosphate buffers) only 3% of 9-xanthyl ethyl carbamate (XEC) decomposes in ∼48h, allowing a prolonged storage time of the derivatized EC conferring more accurate determination for large sample batches. Detection limit of this method is 3μgL(-1), while its average recovery is 98.5±4.9%. Calibration is linear up to 400μgL(-1). The EC content in 33 Hungarian wine samples ranges from 4.9 to 39.9μgL(-1) (average: 17.7μgL(-1), median: 16.7μgL(-1)), while only three of them was slightly over 30μgL(-1) EC, it being the maximum allowed concentration in countries already having legislation.

Ozone-initiated terpene reaction products in five European offices: Replacement of a floor cleaning agent

Cleaning agents often emit terpenes that react rapidly with ozone. These ozone-initiated reactions, which occur in the gas-phase and on surfaces, produce a host of gaseous and particulate oxygenated compounds with possible adverse health effects in the eyes and airways. Within the European Union (EU) project OFFICAIR, common ozone-initiated reaction products were measured before and after the replacement of the regular floor cleaning agent with a preselected low emitting floor cleaning agent in four offices located in four EU countries. One reference office in a fifth country did not use any floor cleaning agent. Limonene, α-pinene, 3-carene, dihydromyrcenol, geraniol, linalool, and α-terpineol were targeted for measurement together with the common terpene oxidation products formaldehyde, 4-acetyl-1-methylcyclohexene (4-AMCH), 3-isopropenyl-6-oxo-heptanal (IPOH), 6-methyl-5-heptene-2-one, (6-MHO), 4-oxopentanal (4-OPA), and dihydrocarvone (DHC). Two-hour air samples on Tenax TA and DNPH cartridges were taken in the morning, noon, and in the afternoon and analyzed by thermal desorption combined with gas chromatography/mass spectrometry and HPLC/UV analysis, respectively. Ozone was measured in all sites. All the regular cleaning agents emitted terpenes, mainly limonene and linalool. After the replacement of the cleaning agent, substantially lower concentrations of limonene and formaldehyde were observed. Some of the oxidation product concentrations, in particular that of 4-OPA, were also reduced in line with limonene. Maximum 2 h averaged concentrations of formaldehyde, 4-AMCH, 6-MHO, and IPOH would not give rise to acute eye irritation-related symptoms in office workers; similarly, 6-AMCH, DHC and 4-OPA would not result in airflow limitation to the airways.

Perceived Indoor Environment and Occupants' Comfort in European "Modern" Office Buildings: The OFFICAIR Study

Indoor environmental conditions (thermal, noise, light, and indoor air quality) may affect workers’ comfort, and consequently their health and well-being, as well as their productivity. This study aimed to assess the relations between perceived indoor environment and occupants’ comfort, and to examine the modifying effects of both personal and building characteristics. Within the framework of the European project OFFICAIR, a questionnaire survey was administered to 7441 workers in 167 “modern” office buildings in eight European countries (Finland, France, Greece, Hungary, Italy, The Netherlands, Portugal, and Spain). Occupants assessed indoor environmental quality (IEQ) using both crude IEQ items (satisfaction with thermal comfort, noise, light, and indoor air quality), and detailed items related to indoor environmental parameters (e.g., too hot/cold temperature, humid/dry air, noise inside/outside, natural/artificial light, odor) of their office environment. Ordinal logistic regression analyses were performed to assess the relations between perceived IEQ and occupants’ comfort. The highest association with occupants’ overall comfort was found for “noise”, followed by “air quality”, “light” and “thermal” satisfaction. Analysis of detailed parameters revealed that “noise inside the buildings” was highly associated with occupants’ overall comfort. “Layout of the offices” was the next parameter highly associated with overall comfort. The relations between IEQ and comfort differed by personal characteristics (gender, age, and the Effort Reward Imbalance index), and building characteristics (office type and building’s location). Workplace design should take into account both occupant and the building characteristics in order to provide healthier and more comfortable conditions to their occupants.

Microanalytical method development for Fe, Cu and Zn determination in colorectal cancer cells

Microanalytical methods suitable for the determination of Fe, Cu in HT-29 (human colon adenocarcinoma) cells treated with different iron compounds (Fe(II) sulfate, Fe(III) chloride, Fe(III) citrate and Fe(III) transferrin) and cultured in medium supplemented or not with 10% (v/v) fetal calf serum (FCS) by total reflection X-ray fluorescence spectrometry (TXRF) and simultaneous graphite furnace atomic absorption spectrometry (GF-AAS) were developed. The developed TXRF method was also suitable for Zn determination in the samples. The main advantage of the proposed methods is the execution of all sample preparation steps following incubation and prior to the elemental analysis in the same Eppendorf tubes. Sample preparation was performed at microscale (115 μL sample volume) with 65% nitric acid and 30% hydrogen peroxide. According to scanning electron microscopic measurements, the organic matrix of the cell samples could be eliminated to the extent that accurate results were obtained for Cu and Fe by analyzing the same samples by TXRF and GF-AAS. Concerning the iron uptake, HT-29 cells incubated in FCS-free medium contained Fe in cca. 5-50 times higher amounts compared to cells cultured in FCS supplemented medium. Pronounced differences in the iron uptake compared to the iron supply (inorganic vs. organic chelated as well as iron(II) vs. iron(III)) were observed in the case of cell lines incubated in FCS-free medium.

Assessment of indoor air quality in office buildings across Europe : the OFFICAIR study

The European project OFFICAIR aimed to broaden the existing knowledge regarding indoor air quality (IAQ) in modern office buildings, i.e., recently built or refurbished buildings. Thirty-seven office buildings participated in the summer campaign (2012), and thirty-five participated in the winter campaign (2012-2013). Four rooms were investigated per building. The target pollutants were twelve volatile organic compounds, seven aldehydes, ozone, nitrogen dioxide and particulate matter with aerodynamic diameter <2.5μm (PM2.5). Compared to other studies in office buildings, the benzene, toluene, ethylbenzene, and xylene concentrations were lower in OFFICAIR buildings, while the α-pinene and d-limonene concentrations were higher, and the aldehyde, nitrogen dioxide and PM2.5 concentrations were of the same order of magnitude. When comparing summer and winter, significantly higher concentrations were measured in summer for formaldehyde and ozone, and in winter for benzene, α-pinene, d-limonene, and nitrogen dioxide. The terpene and 2-ethylhexanol concentrations showed heterogeneity within buildings regardless of the season. Considering the average of the summer and winter concentrations, the acetaldehyde and hexanal concentrations tended to increase by 4-5% on average with every floor level increase, and the nitrogen dioxide concentration tended to decrease by 3% on average with every floor level increase. A preliminary evaluation of IAQ in terms of potential irritative and respiratory health effects was performed. The 5-day median and maximum indoor air concentrations of formaldehyde and ozone did not exceed their respective WHO air quality guidelines, and those of acrolein, α-pinene, and d-limonene were lower than their estimated thresholds for irritative and respiratory effects. PM2.5 indoor concentrations were higher than the 24-h and annual WHO ambient air quality guidelines.

Occurrence of antimony and phthalate esters in polyethylene terephthalate bottled drinking water

ABSTRACT Interest in studying leaching of toxic (in)organic contaminants such as antimony (Sb) and phthalate esters into drinking water increased because of the ever growing market of water bottled in polyethylene terephthalate (PET) packaging material. Possible contamination sources of drinking water contained in PET bottles are hereby reviewed. Instrumental analytical methods suitable for Sb and phthalate ester determination in drinking water and PET material are also presented. Outcomes on leaching of Sb and phthalate esters into drinking water are grouped according to storage time, exposure to heat/light, sample pH, and PET bottle volume. Methods for estimation of toxicological activity of water in PET bottles are also compiled. Normally, Sb and phthalate ester concentrations in drinking water do not exceed the health limit values in force. Although excellent detection limits can be achieved for phthalate ester determination, due to their ubiquity, results are primarily affected by laboratory cross-contamination. Recent investigations suggest that drinking water stored in PET bottles does not possess either genotoxic or estrogenic activity.