Vitor M. Correlo

Cork: properties, capabilities and applications

Abstract Cork is a natural, renewable, sustainable raw material that has been used for many centuries. As a result of this very long term interest, the scientific literature on cork is extensive. The present review focuses on the chemical composition, physical and mechanical properties of cork and on its products and sub-products. The substantial efforts to fully characterise cork, as well as new developments and evolving research, are reviewed, beginning with its histology, growth and morphology (at macro- and microscales). The chemical structure is analysed in detail, covering both the materials that form the wall structure and the low molecular weight, extractable components. The unique properties of cork are discussed and correlated with current knowledge on morphology and chemical structure. Finally, the important industrial applications of cork are reviewed, in the context of research to provide cork with novel, high added-value applications.

Melt-based compression-molded scaffolds from chitosan-polyester blends and composites: Morphology and mechanical properties

Blends of chitosan and synthetic aliphatic polyesters (polybutylene succinate, polybutylene succinate adipate, polycaprolactone, and polybutylene terepthalate adipate) were compounded with and without hydroxyapatite, a bioactive mineral filler known to enhance osteoconduction. The blends and composites were compression molded with two different granulometric salt sizes (63-125 microm and 250-500 microm) having different levels of salt content (60, 70, and 80%) by weight. By leaching the salt particles, it was possible to produce porous scaffolds with distinct morphologies. The relationship between scaffold morphology and mechanical properties was evaluated using scanning electron microscopy, microcomputed tomography, compression testing, differential scanning calorimetry, small-angle X-ray scattering (SAXS), and wide-angle X-ray scattering. The produced scaffolds are characterized by having different morphologies depending on the average particle size and the amount of NaCl used. Specimens with higher porosity level have a less organized pore structure but increased interconnectivity of the pores. The stress-strain curve under compression displayed a linear elasticity followed by a plateau whose characteristics depend on the scaffold polymer composition. A decrease in the salt particle size used to create the porosity caused in general a decrease in the mechanical properties of the foams. Composites with hydroxyapatite had a sharp reduction in yield stress, modulus, and strain at break. The melting temperature decreased with increased chitosan content. SAXS results indicate no preferential crystalline orientation in the scaffolds. Cytotoxicity evaluation were carried out using standard tests (accordingly to ISO/EN 10993 part 5 guidelines), namely MTS test with a 24-h extraction period, revealing that L929 cells had comparable metabolic activities to that obtained for the negative control.

Osteogenic Differentiation of Human Bone Marrow Mesenchymal Stem Cells Seeded on Melt Based Chitosan Scaffolds for Bone Tissue Engineering Applications

The purpose of this study was to evaluate the growth patterns and osteogenic differentiation of human bone marrow mesenchymal stem cells (hBMSCs) when seeded onto new biodegradable chitosan/polyester scaffolds. Scaffolds were obtained by melt blending chitosan with poly(butylene succinate) in a proportion of 50% (wt) each and further used to produce a fiber mesh scaffold. hBMSCs were seeded on those structures and cultured for 3 weeks under osteogenic conditions. Cells were able to reduce MTS and demonstrated increasing metabolic rates over time. SEM observations showed cell colonization at the surface as well as within the scaffolds. The presence of mineralized extracellular matrix (ECM) was successfully demonstrated by peaks corresponding to calcium and phosphorus elements detected in the EDS analysis. A further confirmation was obtained when carbonate and phosphate group peaks were identified in Fourier Transformed Infrared (FTIR) spectra. Moreover, by reverse transcriptase (RT)-PCR analysis, it was observed the expression of osteogenic gene markers, namely, Runt related transcription factor 2 (Runx2), type 1 collagen, bone sialoprotein (BSP), and osteocalcin. Chitosan-PBS (Ch-PBS) biodegradable scaffolds support the proliferation and osteogenic differentiation of hBMSCs cultured at their surface in vitro, enabling future in vivo testing for the development of bone tissue engineering therapies.

Chondrogenic differentiation of human bone marrow mesenchymal stem cells in chitosan-based scaffolds using a flow-perfusion bioreactor.

Native articular cartilage is subjected to synovial fluid flow during normal joint function. Thus, it is believed that the morphogenesis of articular cartilage may be positively regulated by the application of similar stimulation in vitro. In the present study, the effect of fluid flow over the chondrogenic differentiation of human bone marrow‐derived mesenchymal stem cells (hBM‐MSCs) was investigated. We intended to find out whether the shear stress caused by perfusion of the medium through the constructs was capable of augmenting the differentiation process. Human BMSCs were isolated from bone marrow aspirates and were characterized by flow cytometry. After expansion, hBM‐MSCs were seeded statically onto fibre mesh scaffolds, consisting of a blend of 50:50 chitosan:poly(butylene terephthalate adipate) (CPBTA). Constructs were cultured in a flow‐perfusion bioreactor for 28 days, using complete medium for chondrogenesis supplemented by TGFβ3. An enhanced ECM deposition and collagen type II production was observed in the bioreactor samples when compared to the static controls. Moreover, it was observed that hBM‐MSCs, in static cultures, take longer to differentiate. ECM accumulation in these samples is lower than in the bioreactor sections, and there is a significant difference in the expression of collagen type I. We found that the flow‐induced shear stress has a beneficial effect on the chondrogenic differentiation of hMSCs. Copyright

Nanoparticulate bioactive-glass-reinforced gellan-gum hydrogels for bone-tissue engineering

This work presents bioactive-glass-reinforced gellan-gum spongy-like hydrogels (GG-BAG) as novel hydrophilic materials for use as the scaffolding in bone-tissue engineering. The reinforcement with bioactive-glass particles resulted in an improvement to the microstructure and to the mechanical properties of the material. These mechanical properties were found to be dependent on the composition and improved with the amount of bioactive glass; however, values necessary to accommodate biomechanical loading were not achieved in this study. Nevertheless, by incorporating the bioactive-glass particles, the composite material acquired the ability to form an apatite layer when soaked in simulated body fluid. Furthermore, human-adipose-derived stem cells were able to adhere and spread within the gellan-gum, spongy-like hydrogels reinforced with the bioactive glass, and remain viable, which is an important result when considering their use in bone-tissue engineering. Thus, hydrogels based on gellan gum and bioactive glass are promising biomaterials for use either alone or with cells, and with the potential for use in osteogenic differentiation.

Chitosan–poly(butylene succinate) scaffolds and human bone marrow stromal cells induce bone repair in a mouse calvaria model

Tissue engineering sustains the need of a three‐dimensional (3D) scaffold to promote the regeneration of tissues in volume. Usually, scaffolds are seeded with an adequate cell population, allowing their growth and maturation upon implantation in vivo. Previous studies obtained by our group evidenced significant growth patterns and osteogenic differentiation of human bone marrow mesenchymal stem cells (hBMSCs) when seeded and cultured on melt‐based porous chitosan fibre mesh scaffolds (cell constructs). Therefore, it is crucial to test the in vivo performance of these in vitro 3D cell constructs. In this study, chitosan‐based scaffolds were seeded and cultured in vitro with hBMSCs for 3 weeks under osteogenic stimulation conditions and analysed for cell adhesion, proliferation and differentiation. Implantation of 2 weeks precultured cell constructs in osteogenic culture conditions was performed into critical cranial size defects in nude mice. The objective of this study was to verify the scaffold integration and new bone formation. At 8 weeks of implantation, scaffolds were harvested and prepared for micro‐computed tomography (µCT) analysis. Retrieved implants showed good integration with the surrounding tissue and significant bone formation, more evident for the scaffolds cultured and implanted with human cells. The results of this work demonstrated that chitosan‐based scaffolds, besides supporting in vitro proliferation and osteogenic differentiation of hBMSCs, induced bone formation in vivo. Thus, their osteogenic potential in orthotopic location in immunodeficient mice was validated, evidencing good prospects for their use in bone tissue‐engineering therapies. Copyright

Osteogenic differentiation of two distinct subpopulations of human adipose-derived stem cells : an in vitro and in vivo study

The first stem cells considered for the reconstruction of bone were bone marrow mesenchymal stem cells (BMSCs). Subsequently, cells with similar marker expression panel and differentiation potential were found in new sources of cells, such as adipose tissue. This source of stem cells has a promising future in tissue‐engineering applications, considering the abundance of this tissue in the human body, the easy harvesting and the high number of stem cells that are available from such a small amount of tissue. The isolation of the adipose stem cells is generally performed by means of enzymatic digestion of the tissues, followed by a natural selection of the stem cells based on their capacity to adhere to the culture flasks, leading to a quite heterogeneous population. This constitutes a major drawback for the use of these cells, since the heterogeneity of the cell culture obtained can compromise their proliferation and differentiation potential. In the present study we have analysed the in vitro and in vivo behaviour of two selected subpopulations with high osteogenic potential. For this purpose, ASCs

In vitro degradation and in vivo biocompatibility of chitosan–poly(butylene succinate) fiber mesh scaffolds

^{{\rm{CD29}}+}

Evaluating Biomaterial- and Microfluidic-Based 3D Tumor Models

and ASCs

Polyhydroxybutyrate-co-hydroxyvalerate structures loaded with adipose stem cells promote skin healing with reduced scarring.

^{{\rm{STRO-1}}+}