Wan-Ling Liu

Aluminum based metal-organic framework-polymer monolith in solid-phase microextraction of penicillins in river water and milk samples

In this study, aluminum based metal-organic framework (Al-MOF)-organic polymer monoliths were prepared via microwave-assisted polymerization of ethylene dimethacrylate (EDMA), butyl methacrylate (BMA) with different weight percentages of Al-MOF (MIL-53; 37.5-62.5%) and subsequently utilized as sorbent in solid-phase microextraction (SPME) of penicillins (penicillin G, penicillin V, oxacillin, cloxacillin, dicloxacillin, nafcillin). The Al-MOF-polymer was characterized using Fourier transform infrared (FTIR) spectroscopy, powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and SEM-energy-dispersive X-ray spectroscopy (SEM-EDS) to clarify the retained crystalline structure well as the homogeneous dispersion of Al-MOF (MIL-53) in polymer monolith. The developed Al-MOF-polymer (MIL-53) monolithic column was evaluated according to its extraction recovery of penicillins. Several parameters affecting the extraction recoveries of penicillins using fabricated Al-MOF-polymer (MIL-53) monolithic column including different MIL-53 weight percentages, column length, pH, desorption solvent, and mobile phase flow rate were investigated. For comparison, different Al-based MOFs (MIL-68, CYCU-4 and DUT-5) were fabricated using the optimized condition for MIL-53-polymer (sample matrix at pH 3, 200μL desorption volume using methanol, 37.5% of MOF, 4-cm column length at 0.100mLmin(-1) flow rate). Among all the Al-MOF-polymers, MIL-53(Al)-polymer still afforded the best extraction recovery for penicillins ranging from 90.5 to 95.7% for intra-day with less than 3.5% relative standard deviations (RSDs) and inter-day precision were in the range of 90.7-97.6% with less than 4.2% RSDs. Meanwhile, the recoveries for column-to-column were in the range of 89.5-93.5% (<3.4% RSDs) while 88.5-90.5% (<5.8% RSDs) for batch-to-batch (n=3). Under the optimal conditions, the limit of detections were in the range of 0.06-0.26μgL(-1) and limit of quantifications between 0.20 and 0.87μgL(-1). Finally, the MIL-53-polymer was applied for the extraction of penicillin in river water and milk by spiking trace-level penicillin for as low as 50μgL(-1) and 100μgL(-1) with recoveries ranging from 80.8% to 90.9% (<6.7% RSDs) in river water and 81.1% to 100.7% (<7.1% RSDs) in milk sample, respectively.

A rapid synthetic method for organic polymer-based monoliths in a room temperature ionic liquid medium via microwave-assisted vinylization and polymerization

In this communication, we report a very efficient method of manufacturing polymer-based monolith in an ionic liquid reaction medium via microwave-assisted vinylization and polymerization. This novel approach took only 10 min to complete the whole process.

Fast Multipoint Immobilized MOF Bioreactor

An enzyme-NBD@MOF bioreactor with exemplary proteolytic performance, even after successive reuse and storage, was produced through a novel, rapid and simple multipoint immobilization technique without chemical modification of the solid support. Enzyme loading and distribution could be directly monitored from the fluorescence emission of the bioreactor. The dye molecular dimension plays a role in its overall performance.

Immobilization of Protein on Nanoporous Metal-Organic Framework Materials

Recently, metal-organic frameworks (MOFs) have been gaining attention as attractive support materials for the immobilization of proteins. They possess well-ordered pore structures, aperture channel distributions, great surface area, high stability, and can be modified with various functional groups. In this review, we present an overview of the reported fabrication methods of these materials along with the advantages and limitations of different approaches to immobilizing enzymes using MOF materials as support. GRAPHICAL ABSTRACT

Lipase‐Supported Metal–Organic Framework Bioreactor Catalyzes Warfarin Synthesis

A green and sustainable strategy synthesizes clinical medicine warfarin anticoagulant by using lipase-supported metal-organic framework (MOF) bioreactors (see scheme). These findings may be beneficial for future studies in the industrial production of chemical, pharmaceutical, and agrochemical precursors.

On-line concentration sample stacking coupled with water-in-oil microemulsion electrokinetic chromatography.

This study describes for the first time, the ability of a normal stacking mode (NSM) on-line concentration step coupled with water-in-oil (W/O) microemulsion electrokinetic chromatography (MEEKC), using six common penicillin antibiotics (oxacillin, penicillin V, penicillin G, nafcillin, ampicillin, and amoxicillin) as test analytes. Optimization of penicillin separation in the conventional W/O MEEKC system demonstrated that change in the type and concentration of the oil phase (1-butanol) and column temperature had a pronounced effect on the separation. With the subsequent development of the NSM coupled with W/O MEEKC, improved separation and detection sensitivities were observed when an organic solvent plug (1-propanol; 1.04 cm) was placed between the W/O microemulsion and the sample solutions. This could be attributed to the solution viscosity difference between the aqueous sample zone and the organic solvent plug causing the penicillin to be stacked in this 1-propanol plug. The optimal NSM W/O MEEKC provided about 12-fold increase in detection sensitivity compared with conventional sample injection (50 mbar, 3 s). Finally, this proposed method was successfully applied in the analyses of several food samples (porcine organs) spiked with penicillin.

Nanoporous Carbons Derived from Metal-Organic Frameworks as Novel Matrices for Surface-Assisted Laser Desorption/Ionization Mass Spectrometry

Surface-assisted laser desorption/ionization mass spectrometry (SALDI-MS) represents a powerful tool for the analysis of biomolecules, synthetic polymers, and even small organic compounds; its performances largely depend on the type of matrix materials utilized. Here, for the first time the employment of nanoporous carbons derived from metal-organic frameworks (MOFs) as novel matrices for SALDI-MS is demonstrated. The nanoporous carbons derived from MOFs not only circumvent the shortcomings of existing matrix materials but also demonstrate much higher efficiency of laser desorption/ionization for various compounds than any other nanoporous carbons reported so far. A new perspective for the development of matrix materials for SALDI-MS application is therefore provided.

A poly(alkyl methacrylate-divinylbenzene-vinylbenzyl trimethylammonium chloride) monolithic column for solid-phase microextraction.

In this study, an organic polymer monolithic columns, which were prepared via in situ polymerization of alkyl methacrylate-ester (AMA), divinylbenzene (DVB) and vinylbenzyl trimethylammonium chloride (VBTA, charged monomer), were developed as adsorbent for solid-phase microextraction (SPME). Different parameters affecting the extraction efficiency for nine (9) non-steroidal anti-inflammatory drugs (NSAIDs) such as the ratio of the stearyl methacrylate (SMA) to DVB monomer, column length, sample pH, extraction flow rate and desorption solvent were investigated to obtain the optimal SPME condition. Also, the permeability for each poly(AMA-DVB-VBTA) monolithic column was investigated by adding porogenic solvent (poly(ethylene glycol), PEG). Using the optimized condition, a series of AMA-based poly(AMA-DVB-VBTA) monolith columns were developed to determine the effect the extraction efficiency of NSAIDs by varying the alkyl chain length of the methacrylate ester (methyl-, butyl-, octyl-, or lauryl-methacrylate; (MMA, BMA, OMA, LMA)). Results showed that decreasing the AMA chain length increases the extraction efficiency of some NSAIDs (i.e. sulindac (sul), naproxen (nap), ketoprofen (ket) and indomethacin (idm)). Among the poly(AMA-DVB-VBTA) monolithic columns, poly(BMA-DVB-VBTA) showed a highly repeatable extraction efficiency for NSAIDs with recoveries ranging from 85.0 to 100.2% with relative standard deviation (RSD) less than 6.8% (n=3). The poly(BMA-DVB-VBTA) can also be reused for at least 50 times without any significant effect in extraction efficiency for NSAIDs. Finally, using the established conditions, the poly(BMA-DVB-VBTA) was used to extract trace-level NSAIDs (100μgL(-1)) in river water with good recoveries ranging from 75.8 to 90.8% (RSD<14.9%).

A novel type of matrix for surface-assisted laser desorption-ionization mass spectrometric detection of biomolecules using metal-organic frameworks.

A 3D metal-organic framework (MOF) nanomaterial as matrix for surface-assisted laser desorption/ionization mass spectrometry (SALDI-MS) and tandem mass spectrometry (MS/MS) was developed for the analysis of complex biomolecules. Unlike other nanoparticle matrices, this MOF nanomaterial does not need chemical modification prior to use. An exceptional signal reproducibility as well as very low background interferences in analyzing mono-/di-saccharides, peptides and complex starch digests demonstrate its high potential for biomolecule assays, especially for small molecules.

Capillary electrophoresis-laser-induced fluorescence detection of rat brain catecholamines with microwave-assisted derivatization

In this study, a rapid and sensitive method is described for the catecholamines detection in rat brain. CE with LIF detection for the determination of FITC derivatized catecholamines (dopamine, epinephrine, and norepinephrine) was demonstrated. Conventional water bath and microwave‐assisted derivatization methods were employed and a significant reduction in the derivatization time from 2 h for the conventional water bath at room temperature (ca. 25°C) to 2 min for the microwave‐assisted derivatization was achieved. Online sample concentration of field‐amplified sample stacking (FASS) method was employed to achieve higher sensitivities (the detection limits obtained in the normal injection mode ranged from 2.6 to 4.5 ng L−1 and in the FASS mode ranged from 22 to 34 pg L−1). Furthermore, this microwave‐assisted derivatization CE–LIF method successfully determined catecholamines in rat brain with as low as 100 ng L−1 (FASS mode) to 10 μg L−1 (normal injection mode). This CE–LIF method provided better detection ability when compared to the best reports on catecholamines analyses.