Yung-Han Shih

A rapid synthetic method for organic polymer-based monoliths in a room temperature ionic liquid medium via microwave-assisted vinylization and polymerization

In this communication, we report a very efficient method of manufacturing polymer-based monolith in an ionic liquid reaction medium via microwave-assisted vinylization and polymerization. This novel approach took only 10 min to complete the whole process.

Metal–organic frameworks: new matrices for surface-assisted laser desorption–ionization mass spectrometry

The cage-type MIL-100(Fe) metal-organic frameworks (MOFs) were used as matrices for surface assisted laser desorption-ionization mass spectrometry. The unique 3D cage frameworks and the iron-center feature good reproducibility of MS intensity and a high signal-to-noise ratio compared to organic or other nanoparticle matrices.

Ionic liquids as porogens in the microwave-assisted synthesis of methacrylate monoliths for chromatographic application.

Several imidazolium-based ionic liquids (ILs) with varying cation alkyl chain length (C(4)-C(10)) and anion type (tetrafluoroborate ([BF(4)](-)), hexafluorophosphate ([PF(6)](-)) and bis(trifluoromethylsulfonyl)imide ([Tf(2)N](-))) were used as reaction media in the microwave polymerization of methacrylate-based stationary phases. Scanning electron micrographs and backpressures of poly(butyl methacrylate-ethylene dimethacrylate) (poly(BMA-EDMA)) monoliths synthesized in the presence of these ionic liquids demonstrated that porosity and permeability decreased when cation alkyl chain length and anion hydrophobicity were increased. Performance of these monoliths was assessed for their ability to separate parabens by capillary electrochromatography (CEC). Intra-batch precision (n=3 columns) for retention time and peak area ranged was 0.80-1.13% and 3.71-4.58%, respectively. In addition, a good repeatability of RSD(Retention time)=<0.30% and ~1.0%, RSD(Peak area)=<1.30% and <4.3%, and RSD(Efficiency)=<0.6% and <11.5% for intra-day and inter-day, respectively exemplify monolith performance reliability for poly(BMA-EDMA) fabricated using 1-hexyl-3-methylimidazolium tetrafluoroborate ([C(6)mim][BF(4)]) porogen. This monolith was also tested for its potential in nanoLC to separate protein digests in gradient mode. ILs as porogens also fabricated different alkyl methacrylate (AMA) (C4-C18) monoliths. Furthermore, employing binary IL porogen mixture such as 1-butyl-3-methylimidazolium tetrafluoroborate ([C(4)mim][BF(4)]) and 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C(4)mim][Tf(2)N]) successfully decreased the denseness of the monolith, than when using [C(4)mim][Tf(2)N] IL alone, enabling a chromatographic run to be performed with 1:1 ratio produced baseline separation for the analytes. The combination of ILs and microwave irradiation made polymer synthesis very fast (~10min), entirely green (organic solvent-free) and energy saving process.

On-line concentration sample stacking coupled with water-in-oil microemulsion electrokinetic chromatography.

This study describes for the first time, the ability of a normal stacking mode (NSM) on-line concentration step coupled with water-in-oil (W/O) microemulsion electrokinetic chromatography (MEEKC), using six common penicillin antibiotics (oxacillin, penicillin V, penicillin G, nafcillin, ampicillin, and amoxicillin) as test analytes. Optimization of penicillin separation in the conventional W/O MEEKC system demonstrated that change in the type and concentration of the oil phase (1-butanol) and column temperature had a pronounced effect on the separation. With the subsequent development of the NSM coupled with W/O MEEKC, improved separation and detection sensitivities were observed when an organic solvent plug (1-propanol; 1.04 cm) was placed between the W/O microemulsion and the sample solutions. This could be attributed to the solution viscosity difference between the aqueous sample zone and the organic solvent plug causing the penicillin to be stacked in this 1-propanol plug. The optimal NSM W/O MEEKC provided about 12-fold increase in detection sensitivity compared with conventional sample injection (50 mbar, 3 s). Finally, this proposed method was successfully applied in the analyses of several food samples (porcine organs) spiked with penicillin.

Nanoporous Carbons Derived from Metal-Organic Frameworks as Novel Matrices for Surface-Assisted Laser Desorption/Ionization Mass Spectrometry

Surface-assisted laser desorption/ionization mass spectrometry (SALDI-MS) represents a powerful tool for the analysis of biomolecules, synthetic polymers, and even small organic compounds; its performances largely depend on the type of matrix materials utilized. Here, for the first time the employment of nanoporous carbons derived from metal-organic frameworks (MOFs) as novel matrices for SALDI-MS is demonstrated. The nanoporous carbons derived from MOFs not only circumvent the shortcomings of existing matrix materials but also demonstrate much higher efficiency of laser desorption/ionization for various compounds than any other nanoporous carbons reported so far. A new perspective for the development of matrix materials for SALDI-MS application is therefore provided.

Determination of imidazole derivatives by micellar electrokinetic chromatography combined with solid-phase microextraction using activated carbon-polymer monolith as adsorbent.

In this study, an effective method for the separation of imidazole derivatives 2-methylimidazole (2-MEI), 4- methylimidazole (4-MEI) and 2-acetyl-4-tetrahydroxybutylimidazole (THI) in caramel colors using cation-selective exhaustive injection and sweeping micellar electrokinetic chromatography (CSEI-sweeping-MEKC) was developed. The limits of detection (LOD) and quantitation (LOQ) for the CSEI-sweeping-MEKC method were in the range of 4.3-80μgL(-1) and 14-270μgL(-1), respectively. Meanwhile, a rapid fabrication activated carbon-polymer (AC-polymer) monolithic column as adsorbent for solid-phase microextraction (SPME) of imidazole colors was developed. Under the optimized SPME condition, the extraction recoveries for intra-day, inter-day and column-to-column were in the range of 84.5-95.1% (<6.3% RSDs), 85.6-96.1% (<4.9% RSDs), and 81.3-96.1% (<7.1% RSDs), respectively. The LODs and LOQs of AC-polymer monolithic column combined with CSEI-sweeping-MEKC method were in the range of 33.4-60.4μgL(-1) and 111.7-201.2μgL(-1), respectively. The use of AC-polymer as SPME adsorbent demonstrated the reduction of matrix effect in food samples such as soft drink and alcoholic beverage thereby benefiting successful determination of trace-level caramel colors residues using CSEI-sweeping-MEKC method. The developed AC-polymer monolithic column can be reused for more than 30 times without any significant loss in the extraction recovery for imidazole derivatives.

A Simple Approach to Enhance the Water Stability of a Metal‐Organic Framework

A facile method to improve the feasibility of water-unstable metal-organic frameworks in an aqueous environment has been developed that involves imbedding in a polymer monolith. The effect of compartment type during polymerization plays a significant role in maintaining the crystalline structure and thermal stability of the MOFs, which was confirmed by powder X-ray diffraction (PXRD) and thermogravimetric analysis (TGA), respectively. The MOF-polymer composite prepared in a narrow compartment (column, ID 0.8 mm) has better thermal and chemical stability than that prepared in a broad compartment (vial, ID 7 mm). The developed MOF-polymer composite was applied as an adsorbent in solid-phase microextraction of nine non-steroidal anti-inflammatory drugs (NSAIDs) and could be used for extraction more than 30 times, demonstrating that the proposed approach has potential for industrial applications.

Enzyme Immobilized on Nanoporous Carbon Derived from Metal–Organic Framework: A New Support for Biodiesel Synthesis

In this study, nanoporous carbon (NPC) derived from metal-organic framework was used as support for the immobilization of Burkholderia cepacia lipase. The decorated aluminum oxide within the mesoporous NPC improved the enzyme loading efficiency as well as the catalytic ability for the transesterification of soybean oil, thus making it a promising green and sustainable catalytic system for industrial application.

Laser Chemistry: Nanoporous Carbons Derived from Metal-Organic Frameworks as Novel Matrices for Surface-Assisted Laser Desorption/Ionization Mass Spectrometry (Small 15/2016).

On page 2057, a Lewis acid porous carbon material with tunable hydrophilicity is prepared by temperature controlled pyrolysis of Al based metal-organic frameworks, by C.-H. Lin, H.-Y. Huang, S. Ma, and co-workers. This porous carbon highlights its low heat capacity, and high water uptake, which acts as efficient laser-absorbing matrix/sorbent for detecting trace levels of target compounds.

Monitoring the Effect of Different Metal Centers in Metal-Organic Frameworks and Their Adsorption of Aromatic Molecules using Experimental and Simulation Studies

In this study, the adsorption behavior of different metal centers in analogous M-1,4-NDC frameworks (1,4-NDC=1,4-naphthalenedicarboxylate) towards guest molecules through simulation studies and experimental studies is reported. Simulation studies showed that the adsorption behavior of analogous M-1,4-NDC is affected by the atomic radius of the metal center, which was found to be in agreement with the experimental studies.