Wang Peilin

Performance evaluation of a parallel-hole collimated detector module for animal SPECT imaging

We have built and investigated a detector module for animal SPECT imaging, especially for use in large field of view (FOV) conditions. The module consists of a PMT-based detector and a parallel-hole collimator with an effective area of 80 mm×80 mm. The detector is composed of a NaI scintillation crystal array coupled to four H8500 position sensitive photomultiplier tubes (PS-PMT). The intrinsic energy resolution of the detector is 11.5% at 140 keV on average. The planar spatial resolution of the module changes from 2.2 mm to 5.1 mm at different source-to-collimator distances with an unchanged sensitivity of about 34cps/MBq. Additionally, the SPECT Micro Deluxe Phantom imaging was performed with a radius of rotation (ROR) of 40 mm. Using the FBP reconstruction algorithm, a high performance image was obtained, indicating the feasibility of this detector module.

Design of data acquisition system and algorithm research for omnidirectional gamma-ray positioning equipment

This article introduces the design and performance of the data acquisition system used in an omnidirectional gamma-ray positioning system, along with a new method used in this system to obtain the position of radiation sources in a large field. This data acquisition system has various built-in interfaces collecting, in real time, information from the radiation detector, the video camera and the GPS positioning module. Experiments show that the data acquisition system is capable of carrying out the proposed quantitative analysis to derive the position of radioactive sources, which also satisfies the requirements of high stability and reliability.

Preliminary study of depth of interaction measurement for a PET detector

In this work we studied the feasibility of detecting the depth of interaction (DOI) with two layers of crystal arrays of LYSO and BGO scintillators coupled to a position-sensitive photomultiplier tube (PS-PMT) R8900-C12. A front-end electronics was designed, with which we got different pulse shapes for different crystals to obtain depth information. With the double integration method, we got the DOI histogram of a divided integration ratio of two crystals as the standard to determine the layer-of-interaction. The DOI accuracy, measured by scanning a 22Na slit source along the side of the module, was 98% for the LYSO layer and 95% for the BGO layer. The energy resolution at 511keV was 13.1% for LYSO and 17.1% for BGO. We obtained good crystal separation in 2D position histograms of both layers. These results could be useful in the manufacture of PET scanners with high spatial resolutions.