Wang Xuewu

Tuning and Cold Test of a Four-Vane RFQ with Ramped Inter-Vane Voltage for the Compact Pulsed Hadron Source

A four-vane radio-frequency quadrupole (RFQ) accelerator is under construction for the Compact Pulsed Hadron Source (CPHS) project at Tsinghua University. The 3 m-long RFQ will accelerate a 50keV proton beam from the ECR source to 3MeV, and deliver it to the downstream drift tube linac (DTL) with a peak current of 50mA, pulse length of 0.5 ms and beam duty factor of 2.5%. The inter-vane voltage is designed to increase with the longitudinal position to produce a short RFQ. Coupling plates are therefore not necessary. The cavity cross section and vane-tip geometry are tailored as a function of the longitudinal position, while limiting the peak surface electric field to 1.8 Kilpatrick. The RFQ is designed, manufactured, and installed at Tsinghua University. We also present the tuning and cold test results of the RFQ accelerator. After final tuning, the relative error of the quadrupole field is within 2%, and the admixture of the two dipole modes are less than 2% of the quadrupole mode.

A position resolution MRPC for muon tomography

Muon tomography is a promising method in the detection and imaging of high Z material. In general, considering the quality of track reconstruction in imaging, a detector of good position resolution, high efficiency and large area is required. This paper presents the design and study of a prototype of position sensitive MRPC with 0.15 mm narrow gas gap and 2.54 mm strip readout. Through a cosmic-ray experiment, the performance of MRPC module is carefully observed and each channel is calibrated. Through an X ray experiment with a narrow slit, the position resolution is studied. The results show that the time resolution of the module can reach 61ps and the spatial resolution can reach 0.36 mm.