Wanxin Sun

Apertureless near-field scanning raman microscopy using reflection scattering geometry

The combination of near-field scanning optical microscopy and Raman spectroscopy provides chemical/structural specific information with nanometer spatial resolution, which are critically important for a wide range of applications, including the study of Si devices, nanodevices, quantum dots, single molecules of biological samples. In this paper, we describe our near-field Raman study using apertureless probes. Our system has two important features, critical to practical applications. (1) The near-field Raman enhancement was achieved by Ag coating of the metal probes, without any preparation of the sample, and (2) while all other apertureless near-field Raman systems were constructed in transmission mode, our system works in the reflection mode, making near-field Raman study a reality for any samples. We have obtained the first 1D Raman mapping of a real Si device with 1s exposure time. This is a very significant development in near-field scanning Raman microscopy as it is the first demonstration that this technique can be used for imaging purpose because of the short integration time. In addition, the metal tips used in our set-up can be utilized to make simultaneous AFM and electrical mappings such as resistance and capacitance that are critical parameters for device applications.

Cellular responses to a nanofibrous environment

Cells respond profoundly to the mechanical rigidity and three-dimensional nanotopology of substrates, as well as the spatial and temporal arrangements of extracellular cues. We summarize the latest developments in probing and engineering biocompatible nanofibrous extracellular environments at the cell and molecular level for applications in tissue engineering and biological research. This will, in turn, guide further development of three-dimensional nanofibrous scaffolds in order to elicit specific cellular responses for relevant applications.

Excitonic nonlinear absorption in CdS nanocrystals studied using Z-scan technique

Irradiance dependence of excitonic nonlinear absorption in cadmium sulfide (CdS) nanocrystals has been studied by using Z-scan method with nanosecond laser pulses. The wavelength dependence of nonlinear absorption has also been measured near the excitonic transition of 1S(e)–1S3/2(h). We observe the saturable absorption, which can be described by a third-order and a fifth-order nonlinear process for both 3.0-nm-sized and 2.3-nm-sized CdS nanocrystals. The experimental results show that the excitonic nonlinear absorption of CdS nanocrystals is greatly enhanced with decreasing particle size. A two-level model is utilized to explain both irradiance and wavelength dependence of the excitonic nonlinearity.

Two-dimensional structures of ferroelectric domain inversion in LiNbO3 by direct electron beam lithography

We report on the fabrication of domain-reversed structures in LiNbO3 by means of direct electron beam lithography at room temperature without any static bias. The LiNbO3 crystals were chemically etched after exposure of the electron beam, and then the patterns of domain inversion were characterized by atomic force microscopy (AFM). In our experiment, an interesting phenomenon occurred when the electron beam wrote a one-dimensional grating on the negative c face: a two-dimensional (2D) dotted array was observed on the positive c face, which is significant for its potential to produce 2D and three-dimensional photonic crystals. Furthermore, we also obtained 2D ferroelectric domain inversion in the whole LiNbO3 crystal by writing the 2D square pattern on the negative c face. Such a structure may be utilized to fabricate 2D nonlinear photonic crystal. AFM demonstrates that a 2D domain-reversed structure has been achieved not only on the negative c face of the crystal, but also across the whole thickness of th...

Nonlinear optical microscopy: use of second harmonic generation and two-photon microscopy for automated quantitative liver fibrosis studies

Liver fibrosis is associated with an abnormal increase in an extracellular matrix in chronic liver diseases. Quantitative characterization of fibrillar collagen in intact tissue is essential for both fibrosis studies and clinical applications. Commonly used methods, histological staining followed by either semiquantitative or computerized image analysis, have limited sensitivity, accuracy, and operator-dependent variations. The fibrillar collagen in sinusoids of normal livers could be observed through second-harmonic generation (SHG) microscopy. The two-photon excited fluorescence (TPEF) images, recorded simultaneously with SHG, clearly revealed the hepatocyte morphology. We have systematically optimized the parameters for the quantitative SHG/TPEF imaging of liver tissue and developed fully automated image analysis algorithms to extract the information of collagen changes and cell necrosis. Subtle changes in the distribution and amount of collagen and cell morphology are quantitatively characterized in SHG/TPEF images. By comparing to traditional staining, such as Massons trichrome and Sirius red, SHG/TPEF is a sensitive quantitative tool for automated collagen characterization in liver tissue. Our system allows for enhanced detection and quantification of sinusoidal collagen fibers in fibrosis research and clinical diagnostics.

Size and dielectric dependence of the third-order nonlinear optical response of Au nanocrystals embedded in matrices

The third-order nonlinear optical response of Au nanocrystals embedded in BaTiO(3) and ZrO(2) matrices was investigated through the off-resonance femtosecond optical Kerr effect. Compared with pristine films, the nonlinearity of composite films shows an enhancement that depends on the sizes of Au particles and the refractive index of the matrices. We performed a calculation based on Lorenz-Mie scattering theory to explain the experimental results. Additionally, the nonlinearity was optimized by determination of the values of the particle size and the refractive index of the matrix.

Galactosylated cellulosic sponge for multi-well drug safety testing

Hepatocyte spheroids can maintain mature differentiated functions, but collide to form bulkier structures when in extended culture. When the spheroid diameter exceeds 200 μm, cells in the inner core experience hypoxia and limited access to nutrients and drugs. Here we report the development of a thin galactosylated cellulosic sponge to culture hepatocytes in multi-well plates as 3D spheroids, and constrain them within a macroporous scaffold network to maintain spheroid size and prevent detachment. The hydrogel-based soft sponge conjugated with galactose provided suitable mechanical and chemical cues to support rapid formation of hepatocyte spheroids with a mature hepatocyte phenotype. The spheroids tethered in the sponge showed excellent maintenance of 3D cell morphology, cell-cell interaction, polarity, metabolic and transporter function and/or expression. For example, cytochrome P450 (CYP1A2, CYP2B2 and CYP3A2) activities were significantly elevated in spheroids exposed to β-naphthoflavone, phenobarbital, or pregnenolone-16α-carbonitrile, respectively. The sponge also exhibits minimal drug absorption compared to other commercially available scaffolds. As the cell seeding and culture protocols are similar to various high-throughput 2D cell-based assays, this platform is readily scalable and provides an alternative to current hepatocyte platforms used in drug safety testing applications.

Size-dependent excited state properties of CdS nanocrystals

Abstract CdS nanocrystals of different particle sizes dispersed in ZrO2 films were fabricated by sol–gel and dipping method. The size dependent excited state optical properties were systematically investigated by photoluminescence, time-resolved photoluminescence and Raman spectroscopy. The experimental results show that the relaxation of the excited state is composed of two processes. The fast component that arises from band edge emission shows a weak dependence on particle size, while the slow component, which is attributed to the shallow defect level emission, exhibits strong dependence on particle sizes.

Optimizing the near field around silver tips.

Owing to their promise of obtaining optical as well as topographic information in nanometer scale, apertureless near-field scanning optical microscopy (NSOM) and apertureless near-field scanning optical spectroscopy have drawn much attention recently. However, NSOM is still not a mature technique. A proper understanding of and the ability to tune the near field around the tip end is critically important in NSOM instrumentation and in NSOM image interpretation. On the basis of reflection geometry, we systematically studied the effects of a number of parameters pertinent in the application of apertureless NSOM, e.g., polarization, incident angle, wavelength of the incident laser, tip material, and tip length, by using the generalized field propagator technique. Our results show that all the above parameters have a significant influence on near-field enhancement and that care must be taken in the design of the experiment in order to maximize the near field. In addition to apertureless NSOM and spectroscopy, apertureless near-field lithography can benefit from these simulation results.

Preparation of cantilevered W tips for atomic force microscopy and apertureless near-field scanning optical microscopy

Tip characteristics play an important role in the resolution and sensitivity of scanning probe microscopy. Extensive efforts have been devoted to tip fabrication. Most of the research is focused on scanning tunneling microscopy applications, which require sharp and short tips. Long tips that can be bent into cantilevered tips have great potential in atomic force microscopy/apertureless near-field scanning optical microscopy applications. However, the fabrication of such tips has been rarely reported. The present work is carried out with the aim of optimizing the conditions suitable for fabricating long and sharp tungsten tips. Besides topography, optical, and spectroscopic information, electrical and magnetic measurements can also be carried out with such tips obtained with the recipe reported in this article. The long tips also make it possible to measure deep grooves/trenches.