Warren J. Gross

Fully Parallel Stochastic LDPC Decoders

Stochastic decoding is a new approach to iterative decoding on graphs. This paper presents a hardware architecture for fully parallel stochastic low-density parity-check (LDPC) decoders. To obtain the characteristics of the proposed architecture, we apply this architecture to decode an irregular state-of-the-art (1056,528) LDPC code on a Xilinx Virtex-4 LX200 field-programmable gate-array (FPGA) device. The implemented decoder achieves a clock frequency of 222 MHz and a throughput of about 1.66 Gb/s at Eb/N0=4.25 dB (a bit error rate of 10-8). It provides decoding performance within 0.5 and 0.25 dB of the floating-point sum-product algorithm with 32 and 16 iterations, respectively, and similar error-floor behavior. The decoder uses less than 40% of the lookup tables, flip-flops, and IO ports available on the FPGA device. The results provided in this paper validate the potential of stochastic LDPC decoding as a practical and competitive fully parallel decoding approach.

Fast Polar Decoders: Algorithm and Implementation

Polar codes provably achieve the symmetric capacity of a memoryless channel while having an explicit construction. The adoption of polar codes however, has been hampered by the low throughput of their decoding algorithm. This work aims to increase the throughput of polar decoding hardware by an order of magnitude relative to successive-cancellation decoders and is more than 8 times faster than the current fastest polar decoder. We present an algorithm, architecture, and FPGA implementation of a flexible, gigabit-per-second polar decoder.

A Semi-Parallel Successive-Cancellation Decoder for Polar Codes

Polar codes are a recently discovered family of capacity-achieving codes that are seen as a major breakthrough in coding theory. Motivated by the recent rapid progress in the theory of polar codes, we propose a semi-parallel architecture for the implementation of successive cancellation decoding. We take advantage of the recursive structure of polar codes to make efficient use of processing resources. The derived architecture has a very low processing complexity while the memory complexity remains similar to that of previous architectures. This drastic reduction in processing complexity allows very large polar code decoders to be implemented in hardware. An N=217 polar code successive cancellation decoder is implemented in an FPGA. We also report synthesis results for ASIC.

Stochastic decoding of LDPC codes

This letter presents the first successful method for iterative stochastic decoding of state-of-the-art low-density parity-check (LDPC) codes. The proposed method shows the viability of the stochastic approach for decoding LDPC codes on factor graphs. In addition, simulation results for a 200 and a 1024 length LDPC code demonstrate the near-optimal performance of this method with respect to sum-product decoding. The proposed method has a significant potential for high-throughput and/or low complexity iterative decoding.

Hardware architectures for successive cancellation decoding of polar codes

The recently-discovered polar codes are widely seen as a major breakthrough in coding theory. These codes achieve the capacity of many important channels under successive cancellation decoding. Motivated by the rapid progress in the theory of polar codes, we propose a family of architectures for efficient hardware implementation of successive cancellation decoders. We show that such decoders can be implemented with O(n) processing elements and O(n) memory elements, while providing constant throughput. We also propose a technique for overlapping the decoding of several consecutive codewords, thereby achieving a significant speed-up factor. We furthermore show that successive cancellation decoding can be implemented in the logarithmic domain, thereby eliminating the multiplication and division operations and greatly reducing the complexity of each processing element.

Stochastic Decoding of LDPC Codes over GF(q)

Nonbinary LDPC codes have been shown to outperform currently used codes for magnetic recording and several other channels. Currently proposed nonbinary decoder architectures have very high complexity for high-throughput implementations and sacrifice error-correction performance to maintain realizable complexity. In this paper, we present an alternative decoding algorithm based on stochastic computation that has a very simple implementation and minimal performance loss when compared to the sum-product algorithm. We demonstrate the performance of the algorithm when applied to a GF(16) code and provide details of the hardware resources required for an implementation.

VLSI architectures for the MAP algorithm

This paper presents several techniques for the very large-scale integration (VLSI) implementation of the maximum a posteriori (MAP) algorithm. In general, knowledge about the implementation of the Viterbi (1967) algorithm can be applied to the MAP algorithm. Bounds are derived for the dynamic range of the state metrics which enable the designer to optimize the word length. The computational kernel of the algorithm is the add-MAX* operation, which is the add-compare-select operation of the Viterbi algorithm with an added offset. We show that the critical path of the algorithm can be reduced if the add-MAX* operation is reordered into an offset-add-compare-select operation by adjusting the location of registers. A general scheduling for the MAP algorithm is presented which gives the tradeoffs between computational complexity, latency, and memory size. Some of these architectures eliminate the need for RAM blocks with unusual form factors or can replace the RAM with registers. These architectures are suited to VLSI implementation of turbo decoders.

Majority-Based Tracking Forecast Memories for Stochastic LDPC Decoding

This paper proposes majority-based tracking forecast memories (MTFMs) for area efficient high throughput ASIC implementation of stochastic Low-Density Parity-Check (LDPC) decoders. The proposed method is applied for ASIC implementation of a fully parallel stochastic decoder that decodes the (2048, 1723) LDPC code from the IEEE 802.3an (10GBASE-T) standard. The decoder occupies a silicon core area of 6.38 mm2 in CMOS 90 nm technology, achieves a maximum clock frequency of 500 MHz, and provides a maximum core throughput of 61.3 Gb/s. The decoder also has good decoding performance and error-floor behavior and provides a bit error rate (BER) of about 4 × 10-13 at Eb/N0=5.15 dB. To the best of our knowledge, the implemented decoder is the most area efficient fully parallel soft -decision LDPC decoder reported in the literature.

Delayed Stochastic Decoding of LDPC Codes

A new stochastic decoding algorithm, called Delayed Stochastic (DS) decoding, is introduced to implement low-density-parity-check (LDPC) decoders. The delayed stochastic decoding uses an alternative method to track probability values, which results in reduction of hardware complexity and memory requirement of the stochastic decoders. It is therefore suitable for fully-parallel implementation of long LDPC codes with applications in optical communications. Two decoders are implemented using the DS algorithm for medium (2048, 1723) and long (32768, 26624) LDPC codes. The decoders occupy 3.93- mm2 and 56.5- mm2 silicon area using 90-nm CMOS technology and provide maximum core throughputs of 172.4 and 477.7 Gb/s at [(Eb)/(No)]=5.5 and 4.8 dB, respectively.

A Relaxed Half-Stochastic Iterative Decoder for LDPC Codes

This paper presents a Relaxed Half-Stochastic (RHS) low-density parity-check (LDPC) decoding algorithm that uses some elements of the sum-product algorithm (SPA) in its variable nodes, but maintains the low-complexity interleaver and check node structures characteristic of stochastic decoders. The algorithm relies on the principle of successive relaxation to convert binary stochastic streams to a log-likelihood ratio (LLR) representation. Simulations of a (2048, 1723) RS-LDPC code show that the RHS algorithm can outperform 100-iterations floating-point SPA decoding. We describe approaches for low-complexity implementation of the RHS algorithm. Furthermore, we show how the stochastic nature of the belief representation can be exploited to lower the error floor.