Wayne F. Feltz

An Overview of the International H2O Project (IHOP_2002) and Some Preliminary Highlights

The International H2O Project (IHOP_2002) is one of the largest North American meteorological field experiments in history. From 13 May to 25 June 2002, over 250 researchers and technical staff from the United States, Germany, France, and Canada converged on the Southern Great Plains to measure water vapor and other atmospheric variables. The principal objective of IHOP_2002 is to obtain an improved characterization of the time-varying three-dimensional water vapor field and evaluate its utility in improving the understanding and prediction of convective processes. The motivation for this objective is the combination of extremely low forecast skill for warm-season rainfall and the relatively large loss of life and property from flash floods and other warm-season weather hazards. Many prior studies on convective storm forecasting have shown that water vapor is a key atmospheric variable that is insufficiently measured. Toward this goal, IHOP_2002 brought together many of the existing operational and new st...

Atmospheric Emitted Radiance Interferometer. Part I: Instrument Design

Abstract A ground-based Fourier transform spectrometer has been developed to measure the atmospheric downwelling infrared radiance spectrum at the earths surface with high absolute accuracy. The Atmospheric Emitted Radiance Interferometer (AERI) instrument was designed and fabricated by the University of Wisconsin Space Science and Engineering Center (UW-SSEC) for the Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Program. This paper emphasizes the key features of the UW-SSEC instrument design that contribute to meeting the AERI instrument requirements for the ARM Program. These features include a highly accurate radiometric calibration system, an instrument controller that provides continuous and autonomous operation, an extensive data acquisition system for monitoring calibration temperatures and instrument health, and a real-time data processing system. In particular, focus is placed on design issues crucial to meeting the ARM requirements for radiometric calibration, spectral cali...

Near-Continuous Profiling of Temperature, Moisture, and Atmospheric Stability Using the Atmospheric Emitted Radiance Interferometer (AERI)

Abstract The Department of Energy Atmospheric Radiation Measurement Program (ARM) has funded the development and installation of five ground-based atmospheric emitted radiance interferometer (AERI) systems at the Southern Great Plains (SGP) site. The purpose of this paper is to provide an overview of the AERI instrument, improvement of the AERI temperature and moisture retrieval technique, new profiling utility, and validation of high-temporal-resolution AERI-derived stability indices important for convective nowcasting. AERI systems have been built at the University of Wisconsin—Madison, Madison, Wisconsin, and deployed in the Oklahoma–Kansas area collocated with National Oceanic and Atmospheric Administration 404-MHz wind profilers at Lamont, Vici, Purcell, and Morris, Oklahoma, and Hillsboro, Kansas. The AERI systems produce absolutely calibrated atmospheric infrared emitted radiances at one-wavenumber resolution from 3 to 20 μm at less than 10-min temporal resolution. The instruments are robust, are a...

Observations of the Infrared Radiative Properties of the Ocean—Implications for the Measurement of Sea Surface Temperature via Satellite Remote Sensing

Abstract The Atmospheric Emitted Radiance Interferometer (AERI) was used to measure the infrared radiative properties and the temperature of the Gulf of Mexico during a 5-day oceanographic cruise in January 1995. The ocean skin temperature was measured with an accuracy believed to be better than 0.1°C. The surface reflectivity/emissivity was determined as a function of view angle and sea state. The radiative properties are in good theoretical consistency with in situ measurements of ocean bulk temperature and the meteorological observations made from the oceanographic vessel. The AERI and in situ measurements provide a strong basis for accurate global specifications of sea surface temperature and ocean heat flux from satellites and ships.

Automated retrievals of water vapor and aerosol profiles from an operational Raman lidar

Abstract Automated routines have been developed to derive water vapor mixing ratio, relative humidity, aerosol extinction and backscatter coefficient, and linear depolarization profiles, as well as total precipitable water vapor and aerosol optical thickness, from the operational Raman lidar at the Atmospheric Radiation Measurement (ARM) programs site in north-central Oklahoma. These routines have been devised to maintain the calibration of these data products, which have proven sensitive to the automatic alignment adjustments that are made periodically by the instrument. Since this Raman lidar does not scan, aerosol extinction cannot be directly computed below approximately 800 m due to the incomplete overlap of the outgoing laser beam with the detectors field of view. Therefore, the extinction-to-backscatter ratio at 1 km is used with the aerosol backscatter coefficient profile to compute aerosol extinction from 60 m to the level of complete overlap. Comparisons of aerosol optical depth derived using ...

The ARM program's water vapor intensive observation periods - Overview, initial accomplishments, and future challenges

A series of water vapor intensive observation periods (WVIOPs) were conducted at the Atmospheric Radiation Measurement (ARM) site in Oklahoma between 1996 and 2000. The goals of these WVIOPs are to characterize the accuracy of the operational water vapor observations and to develop techniques to improve the accuracy of these measurements. The initial focus of these experiments was on the lower atmosphere, for which the goal is an absolute accuracy of better than 2% in total column water vapor, corresponding to ~1 W m−2 of infrared radiation at the surface. To complement the operational water vapor instruments during the WVIOPs, additional instrumentation including a scanning Raman lidar, microwave radiometers, chilled-mirror hygrometers, a differential absorption lidar, and ground-based solar radiometers were deployed at the ARM site. The unique datasets from the 1996, 1997, and 1999 experiments have led to many results, including the discovery and characterization of a large (> 25%) sonde-to-sonde variab...

Objective Satellite-Based Detection of Overshooting Tops Using Infrared Window Channel Brightness Temperature Gradients

Abstract Deep convective storms with overshooting tops (OTs) are capable of producing hazardous weather conditions such as aviation turbulence, frequent lightning, heavy rainfall, large hail, damaging wind, and tornadoes. This paper presents a new objective infrared-only satellite OT detection method called infrared window (IRW)-texture. This method uses a combination of 1) infrared window channel brightness temperature (BT) gradients, 2) an NWP tropopause temperature forecast, and 3) OT size and BT criteria defined through analysis of 450 thunderstorm events within 1-km Moderate Resolution Imaging Spectroradiometer (MODIS) and Advanced Very High Resolution Radiometer (AVHRR) imagery. Qualitative validation of the IRW-texture and the well-documented water vapor (WV) minus IRW BT difference (BTD) technique is performed using visible channel imagery, CloudSat Cloud Profiling Radar, and/or Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) cloud-top height for selected cases. Quantit...

A Daytime Complement to the Reverse Absorption Technique for Improved Automated Detection of Volcanic Ash

Abstract An automated volcanic cloud detection algorithm that utilizes four spectral channels (0.65, 3.75, 11, and 12 μm) that are common among several satellite-based instruments is presented. The new algorithm is physically based and globally applicable and can provide quick information on the horizontal location of volcanic clouds that can be used to improve real-time ash hazard assessments. It can also provide needed input into volcanic cloud optical depth and particle size retrieval algorithms, the products of which can help improve ash dispersion forecasts. The results of this new four-channel algorithm for several scenes were compared to a threshold-based reverse absorption algorithm, where the reverse absorption algorithm is used to identify measurements with a negative 11–12-μm brightness temperature difference. The results indicate that the new four-channel algorithm is not only more sensitive to the presence of volcanic clouds but also generally less prone to false alarms than the standard reve...

Raman lidar measurements of the aerosol extinction‐to‐backscatter ratio over the Southern Great Plains

We derive profiles of the aerosol extinction-to-backscatter ratio, S a , at 355 nm using aerosol extinction and backscatter profiles measured during 1998 and 1999 by the operational Raman lidar at the Department of Energy Atmospheric Radiation Measurement Program Southern Great Plains site in north central Oklahoma. Data from this Raman/Rayleigh-Mie lidar, which measures Raman scattering from nitrogen as well as the combined molecular (Rayleigh) and aerosol (Mie) scattering at the laser wavelength, are used to derive aerosol extinction and backscattering independently as a function of altitude. Because this lidar operates at 355 nm, where molecular backscattering is comparable to aerosol backscattering, S a retrievals are generally limited to conditions where aerosol extinction at 355 nm is >0.03 km -1 . The mean value of S a at 355 nm derived for this period was 68 sr with a standard deviation of 12 sr. S a was generally about 5-10 sr higher during high aerosol optical thickness (AOT) (>0.3) conditions than during low AOT ( 15%) variations in the vertical profile of S a occurred about 30% of the time, which implies that significant variability in the vertical distribution of the aerosol size distribution, shape, and/or composition often occurs. The Raman lidar measurements of S a were compared with estimates of particle size and refractive index derived from an algorithm that uses ground-based Sun photometer measurements of Sun and sky radiance. For 17 cases of coincident Raman lidar and Sun and sky radiance measurements, S a was linearly correlated with the aerosol fine mode effective radius and the volume ratio of fine/coarse particles.

Meteorological Applications of Temperature and Water Vapor Retrievals from the Ground-Based Atmospheric Emitted Radiance Interferometer (AERI)

Abstract The Atmospheric Emitted Radiance Interferometer (AERI) is a well-calibrated ground-based instrument that measures high-resolution atmospheric emitted radiances from the atmosphere. The spectral resolution of the instrument is better than one wavenumber between 3 and 18 μm within the infrared spectrum. The AERI instrument detects vertical and temporal changes of temperature and water vapor in the planetary boundary layer. Excellent agreement between radiosonde and AERI retrievals for a 6-month sample of coincident profiles is presented in this paper. In addition, a statistical seasonal analysis of retrieval and radiosonde differences is discussed. High temporal and moderate vertical resolution in the lowest 3 km of the atmosphere allows meteorologically important mesoscale features to be detected. AERI participation in the Department of Energy Atmospheric Radiation Measurement program at the Southern Great Plains Cloud and Radiation Testbed (SGP CART) has allowed development of a robust operationa...