Robert O. Knuteson

Development of a Global Infrared Land Surface Emissivity Database for Application to Clear Sky Sounding Retrievals from Multispectral Satellite Radiance Measurements

Abstract A global database of infrared (IR) land surface emissivity is introduced to support more accurate retrievals of atmospheric properties such as temperature and moisture profiles from multispectral satellite radiance measurements. Emissivity is derived using input from the Moderate Resolution Imaging Spectroradiometer (MODIS) operational land surface emissivity product (MOD11). The baseline fit method, based on a conceptual model developed from laboratory measurements of surface emissivity, is applied to fill in the spectral gaps between the six emissivity wavelengths available in MOD11. The six available MOD11 wavelengths span only three spectral regions (3.8–4, 8.6, and 11–12 μm), while the retrievals of atmospheric temperature and moisture from satellite IR sounder radiances require surface emissivity at higher spectral resolution. Emissivity in the database presented here is available globally at 10 wavelengths (3.6, 4.3, 5.0, 5.8, 7.6, 8.3, 9.3, 10.8, 12.1, and 14.3 μm) with 0.05° spatial reso...

Atmospheric Emitted Radiance Interferometer. Part I: Instrument Design

Abstract A ground-based Fourier transform spectrometer has been developed to measure the atmospheric downwelling infrared radiance spectrum at the earths surface with high absolute accuracy. The Atmospheric Emitted Radiance Interferometer (AERI) instrument was designed and fabricated by the University of Wisconsin Space Science and Engineering Center (UW-SSEC) for the Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Program. This paper emphasizes the key features of the UW-SSEC instrument design that contribute to meeting the AERI instrument requirements for the ARM Program. These features include a highly accurate radiometric calibration system, an instrument controller that provides continuous and autonomous operation, an extensive data acquisition system for monitoring calibration temperatures and instrument health, and a real-time data processing system. In particular, focus is placed on design issues crucial to meeting the ARM requirements for radiometric calibration, spectral cali...

Near-Continuous Profiling of Temperature, Moisture, and Atmospheric Stability Using the Atmospheric Emitted Radiance Interferometer (AERI)

Abstract The Department of Energy Atmospheric Radiation Measurement Program (ARM) has funded the development and installation of five ground-based atmospheric emitted radiance interferometer (AERI) systems at the Southern Great Plains (SGP) site. The purpose of this paper is to provide an overview of the AERI instrument, improvement of the AERI temperature and moisture retrieval technique, new profiling utility, and validation of high-temporal-resolution AERI-derived stability indices important for convective nowcasting. AERI systems have been built at the University of Wisconsin—Madison, Madison, Wisconsin, and deployed in the Oklahoma–Kansas area collocated with National Oceanic and Atmospheric Administration 404-MHz wind profilers at Lamont, Vici, Purcell, and Morris, Oklahoma, and Hillsboro, Kansas. The AERI systems produce absolutely calibrated atmospheric infrared emitted radiances at one-wavenumber resolution from 3 to 20 μm at less than 10-min temporal resolution. The instruments are robust, are a...

Atmospheric Emitted Radiance Interferometer. Part II: Instrument Performance

The Atmospheric Emitted Radiance Interferometer (AERI) instrument was developed for the Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Program by the University of Wisconsin Space Science and Engineering Center (UW-SSEC). The infrared emission spectra measured by the instrument have the sensitivity and absolute accuracy needed for atmospheric remote sensing and climate studies. The instrument design is described in a companion paper. This paper describes in detail the measured performance characteristics of the AERI instruments built for the ARM Program. In particular, the AERI systems achieve an absolute radiometric calibration of better than 1% (3s) of ambient radiance, with a reproducibility of better than 0.2%. The knowledge of the AERI spectral calibration is better than 1.5 ppm (1s) in the wavenumber range 400‐ 3000 cm21.

Observations of the Infrared Radiative Properties of the Ocean—Implications for the Measurement of Sea Surface Temperature via Satellite Remote Sensing

Abstract The Atmospheric Emitted Radiance Interferometer (AERI) was used to measure the infrared radiative properties and the temperature of the Gulf of Mexico during a 5-day oceanographic cruise in January 1995. The ocean skin temperature was measured with an accuracy believed to be better than 0.1°C. The surface reflectivity/emissivity was determined as a function of view angle and sea state. The radiative properties are in good theoretical consistency with in situ measurements of ocean bulk temperature and the meteorological observations made from the oceanographic vessel. The AERI and in situ measurements provide a strong basis for accurate global specifications of sea surface temperature and ocean heat flux from satellites and ships.

Achieving Climate Change Absolute Accuracy in Orbit

The Climate Absolute Radiance and Refractivity Observatory (CLARREO) mission will provide a calibration laboratory in orbit for the purpose of accurately measuring and attributing climate change. CLARREO measurements establish new climate change benchmarks with high absolute radiometric accuracy and high statistical confidence across a wide range of essential climate variables. CLARREOs inherently high absolute accuracy will be verified and traceable on orbit to Systeme Internationale (SI) units. The benchmarks established by CLARREO will be critical for assessing changes in the Earth system and climate model predictive capabilities for decades into the future as society works to meet the challenge of optimizing strategies for mitigating and adapting to climate change. The CLARREO benchmarks are derived from measurements of the Earths thermal infrared spectrum (5–50 μm), the spectrum of solar radiation reflected by the Earth and its atmosphere (320–2300 nm), and radio occultation refractivity from which...

Downwelling spectral radiance observations at the SHEBA ice station: Water vapor continuum measurements from 17 to 26μm

Earth loses energy to space in the form of longwave (or infrared) radiation. Much of this energy is radiated through the transparent portion of the water vapor rotational band from 17 to 33 μm (300 to 600 cm−1). Very few measurements have been made in this spectral region to characterize how water vapor absorbs and emits longwave radiation. An Atmospheric Emitted Radiance Interferometer (AERI) with extended longwave spectral coverage has been deployed at the Surface Heat Budget of the Arctic Ocean (SHEBA) ice station 300 miles north of the Alaskan coast to measure downwelling radiances at wavelengths of 3 to 26 μm (380 to 3000 cm−1). The spectral and radiometric performance of the instrument, installation at the ice station, and initial observations are shown. Comparisons to line-by-line radiative transfer calculations for selected clear-sky cases are presented, and air-broadened water vapor continuum absorption coefficients are determined in the wing of the pure rotational band from 17 to 26 μm (380 to 600 cm−1). Comparisons of the coefficients with the widely used Clough Kneizys Davies (CKD) water vapor continuum model suggest empirical modifications to this model are necessary. Comparisons to laboratory measurements of Burch et al. [1974] made at room temperature suggests little or no temperature dependence of the continuum from 400 to 550 cm−1. Implications of these modifications on top-of-atmosphere and surface fluxes, as well as atmospheric cooling rates, are discussed.

The ARM program's water vapor intensive observation periods - Overview, initial accomplishments, and future challenges

A series of water vapor intensive observation periods (WVIOPs) were conducted at the Atmospheric Radiation Measurement (ARM) site in Oklahoma between 1996 and 2000. The goals of these WVIOPs are to characterize the accuracy of the operational water vapor observations and to develop techniques to improve the accuracy of these measurements. The initial focus of these experiments was on the lower atmosphere, for which the goal is an absolute accuracy of better than 2% in total column water vapor, corresponding to ~1 W m−2 of infrared radiation at the surface. To complement the operational water vapor instruments during the WVIOPs, additional instrumentation including a scanning Raman lidar, microwave radiometers, chilled-mirror hygrometers, a differential absorption lidar, and ground-based solar radiometers were deployed at the ARM site. The unique datasets from the 1996, 1997, and 1999 experiments have led to many results, including the discovery and characterization of a large (> 25%) sonde-to-sonde variab...

The QME AERI LBLRTM: A Closure Experiment for Downwelling High Spectral Resolution Infrared Radiance

Abstract Research funded by the U.S. Department of Energys Atmospheric Radiation Measurement (ARM) program has led to significant improvements in longwave radiative transfer modeling over the last decade. These improvements, which have generally come in small incremental changes, were made primarily in the water vapor self- and foreign-broadened continuum and the water vapor absorption line parameters. These changes, when taken as a whole, result in up to a 6 W m−2 improvement in the modeled clear-sky downwelling longwave radiative flux at the surface and significantly better agreement with spectral observations. This paper provides an overview of the history of ARM with regard to clear-sky longwave radiative transfer, and analyzes remaining related uncertainties in the ARM state-of-the-art Line-by-Line Radiative Transfer Model (LBLRTM). A quality measurement experiment (QME) for the downwelling infrared radiance at the ARM Southern Great Plains site has been ongoing since 1994. This experiment has three...

Meteorological Applications of Temperature and Water Vapor Retrievals from the Ground-Based Atmospheric Emitted Radiance Interferometer (AERI)

Abstract The Atmospheric Emitted Radiance Interferometer (AERI) is a well-calibrated ground-based instrument that measures high-resolution atmospheric emitted radiances from the atmosphere. The spectral resolution of the instrument is better than one wavenumber between 3 and 18 μm within the infrared spectrum. The AERI instrument detects vertical and temporal changes of temperature and water vapor in the planetary boundary layer. Excellent agreement between radiosonde and AERI retrievals for a 6-month sample of coincident profiles is presented in this paper. In addition, a statistical seasonal analysis of retrieval and radiosonde differences is discussed. High temporal and moderate vertical resolution in the lowest 3 km of the atmosphere allows meteorologically important mesoscale features to be detected. AERI participation in the Department of Energy Atmospheric Radiation Measurement program at the Southern Great Plains Cloud and Radiation Testbed (SGP CART) has allowed development of a robust operationa...