Wee Sim Choo

Effect of extraction conditions on the yield and chemical properties of pectin from cocoa husks

Different extraction conditions were applied to investigate the effect of temperature, extraction time and substrate-extractant ratio on pectin extraction from cocoa husks. Pectin was extracted from cocoa husks using water, citric acid at pH 2.5 or 4.0, or hydrochloric acid at pH 2.5 or 4.0. Temperature, extraction time and substrate-extractant ratio affected the yields, uronic acid contents, degrees of methylation (DM) and degrees of acetylation (DA) of the extracted pectins using the five extractants differently. The yields and uronic acid contents of the extracted pectins ranged from 3.38-7.62% to 31.19-65.20%, respectively. The DM and DA of the extracted pectins ranged from 7.17-57.86% to 1.01-3.48%, respectively. The highest yield of pectin (7.62%) was obtained using citric acid at pH 2.5 [1:25 (w/v)] at 95 °C for 3.0 h. The highest uronic acid content (65.20%) in the pectin was obtained using water [1:25 (w/v)] at 95 °C for 3.0 h.

Radical scavenging activity of lipophilized products from lipase-catalyzed transesterification of triolein with cinnamic and ferulic acids.

Lipase-catalyzed transesterification of triolein with cinnamic and ferulic acids using an immobilized lipase from Candida antarctica (E.C. 3.1.1.3) was conducted to evaluate the antioxidant activity of the lipophilized products as model systems for enhanced protection of unsaturated oil. The lipophilized products were identified using ESI-MS. Free radical scavenging activity was determined using the DPPH radical method. The polarity of the solvents proved important in determining the radical scavenging activity of the substrates. Ferulic acid showed much higher radical scavenging activity than cinnamic acid, which has limited activity. The esterification of cinnamic acid and ferulic acid with triolein resulted in significant increase and decrease in the radical scavenging activity, respectively. These opposite effects were due to the effect of addition of electron-donating alkyl groups on the predominant mechanism of reaction (hydrogen atom transfer or electron transfer) of a species with DPPH. The effect of esterification of cinnamic acid was confirmed using ethyl cinnamate which greatly enhances the radical scavenging activity. Although, compared to the lipophilized cinnamic acid product, the activity was lower. The radical scavenging activity of the main component isolated from lipophilized cinnamic acid product using solid phase extraction, monocinnamoyl dioleoyl glycerol, was as good as the unseparated mixture of lipophilized product. Based on the ratio of a substrate to DPPH concentration, lipophilized ferulic acid was a much more efficient radical scavenger than lipophilized cinnamic acid.

Radical Scavenging Activity of Lipophilized Products from Transesterification of Flaxseed Oil with Cinnamic Acid or Ferulic Acid

Lipase-catalyzed transesterification of flaxseed oil with cinnamic acid (CA) or ferulic acid (FA) using an immobilized lipase from Candida antarctica (E.C. 3.1.1.3) was conducted to evaluate whether the lipophilized products provided enhanced antioxidant activity in the oil. Lipase-catalyzed transesterification of flaxseed oil with CA or FA produced a variety of lipophilized products (identified using ESI-MS-MS) such as monocinnamoyl/feruloyl-diacylglycerol, dicinnamoyl-monoacylglycerol and monocinnamoyl-monoacylglycerol. The free radical scavenging activity of the lipophilized products of lipase-catalyzed transesterification of flaxseed oil with CA or FA toward 2,2-diphenyl-1-picrylhydrazyl radical (DPPH·) were both examined in ethanol and ethyl acetate. The polarity of the solvents proved important in determining the radical scavenging activity of the substrates. Unesterified FA showed the highest free radical scavenging activity among all substrates tested while CA had negligible activity. The esterification of CA or FA with flaxseed oil resulted in significant increase and decrease in the radical scavenging activity compared with the native phenolic acid, respectively. Based on the ratio of a substrate to DPPH· concentration, lipophilized FA was a much more efficient free radical scavenger compared to lipophilized CA and was able to provide enhanced antioxidant activity in the flaxseed oil. Lipophilized cinnamic acid did not provide enhanced radical scavenging activity in the flaxseed oil as the presence of natural hydrophilic antioxidants in the oil had much greater radical scavenging activity.

CHAPTER 11:Pectin As a Rheology Modifier: Recent Reports on Its Origin, Structure, Commercial Production and Gelling Mechanism

Pectins (also known by the singular pectin) are a diverse family of biopolymers with a complex range of structures. Their common feature is a polysaccharide backbone of 1,4-linked α-d-galacturonic acids. Pectins are derived from dicotyledonous and some monocotyledonous plants and make up one third of the cell wall materials. Pectin has been widely used as a gelling and stabilizing agent in food, as an incipient ingredient in pharmaceuticals, in personal care products and in other polymer products. It is recognized as safe (GRAS) by the United States Food and Drug Administration (FDA). Commercial pectin is extracted using acids from by-products of the food industry such as citrus peel, apple pomace and sugar beet pulp. There are two types of pectin: high methoxyl (HM) pectin with a degree of methylation (DM) > 50% and low methoxyl (LM) pectin. LM pectins are usually manufactured from HM pectins by de-esterification. HM pectins gel by cross-linking homogalacturonan residues through hydrogen bonds and hydrophobic forces between the methoxyl groups, assisted by a high sugar concentration and low pH. In contrast, LM pectins gel by forming ionic linkages via calcium bridges between two carboxyl groups from two different chains in close proximity, known as the ‘egg-box’ model. The viscoelastic behavior of both gels depends on intrinsic and extrinsic factors. Chemical modifications of pectin such as alkylation, amidation and thiolation have been used to manipulate hydrophilicity, hydrophobicity and adhesion.

Lipase-catalyzed acylation of quercetin with cinnamic acid

Abstract Acylation of quercetin with cinnamic acid catalyzed by Candida antarctica lipase B (CAL-B) or Pseudomonas cepacia lipase C (PCL-C) was investigated. Specifically, the effects of reaction duration, incubation temperature, and molar ratio of substrates on bioconversion yield, initial rate of reaction, and regioselectivity were investigated. Three new acylated quercetin analogues were produced: quercetin 4′-cinnamate (C24H16O8), quercetin 3′,4′-dicinnamate (C33H22O9), and quercetin 7,3′,4′-tricinnamate (C42H28O10). The effects of the lipase-catalyzed acylation conditions on the bioconversion yields varied across the conditions. The initial rate of reaction of acylation of quercetin with cinnamic acid catalyzed by CAL-B and PCL-C was similar. In the presence of CAL-B, acylation mainly took place at the C-4′-OH, generating mostly quercetin 4′-cinnamate; whereas with PCL-C, acylation mainly took place at both the 4′- and 3′-hydroxyls, generating quercetin 3′,4′-dicinnamate. Thin-layer-chromatography analysis showed that the three acylated quercetin analogues had higher lipophilicity when compared with quercetin. In silico investigation revealed that quercetin 4’-cinnamate and quercetin 3′,4′-dicinnamate are likely to be orally active pharmacological drugs.

Electrospun Pectin-Polyhydroxybutyrate Nanofibers for Retinal Tissue Engineering

Natural polysaccharide pectin has for the first time been grafted with polyhydroxybutyrate (PHB) via ring-opening polymerization of β-butyrolactone. This copolymer, pectin-polyhydroxybutyrate (pec-PHB), was blended with PHB in various proportions and electrospun to produce nanofibers that exhibited uniform and bead-free nanostructures, suggesting the miscibility of PHB and pec-PHB. These nanofiber blends exhibited reduced fiber diameters from 499 to 336–426 nm and water contact angles from 123.8 to 88.2° on incorporation of pec-PHB. They also displayed 39–335% enhancement of elongation at break relative to pristine PHB nanofibers. pec-PHB nanofibers were found to be noncytotoxic and biocompatible. Human retinal pigmented epithelium (ARPE-19) cells were seeded onto pristine PHB and pec-PHB nanofibers as scaffold and showed good proliferation. Higher proportions of pec-PHB (pec-PHB10 and pec-PHB20) yielded higher densities of cells with similar characteristics to normal RPE cells. We propose, therefore, that nanofibers of pec-PHB have significant potential as retinal tissue engineering scaffold materials.

Biofilm inhibiting activity of betacyanins from red pitahaya (Hylocereus polyrhizus) and red spinach (Amaranthus dubius) against Staphylococcus aureus and Pseudomonas aeruginosa biofilms

To investigate the biofilm inhibitory activity of betacyanins from red pitahaya (Hylocereus polyrhizus) and red spinach (Amaranthus dubius) against Staphylococcus aureus and Pseudomonas aeruginosa biofilms.

Unprecedented Acid‐Promoted Polymerization and Gelation of Acrylamide: A Serendipitous Discovery

Dilute acid polymerizes degassed, aqueous acrylamide with concomitant gelation, without the need for added free radical initiator or cross-linking agent. This reaction is accelerated by sonication or UV irradiation, but inhibited by adventitious oxygen or the addition of a free radical inhibitor, suggesting an acid-accelerated free radical process. The resulting hydrogels are thixotropic in nature and partially disrupted by the addition of chaotropic agents, indicating the importance of hydrogen bonding to the 3D network. This discovery was made while trying to prepare pectin-polyacrylamide hydrogels. We observed that pectin initiated the gelation of acrylamide, but only if the aqueous pectin samples had a pH lower than ca. 5.