Wei Wen

Electrospun composite nanofiber membrane of poly(l-lactide) and surface grafted chitin whiskers: Fabrication, mechanical properties and cytocompatibility.

To improve both the mechanical properties and cytocompatibility of poly(l-lactide) (PLLA), rod-like chitin whiskers (CHWs) were prepared, and subsequently surface modified with l-lactide to obtain grafted CHWs (g-CHWs). Then, CHWs and g-CHWs were further introduced into PLLA matrix to fabricate CHWs/PLLA and g-CHWs/PLLA nanofiber membranes by electrospinning technique. Morphologies and properties of the CHWs and g-CHWs were characterized. The surface-grafted PLLA chains played an important role in improving interfacial interaction between the whiskers and PLLA matrix. The g-CHWs dispersed more uniformly in matrix than CHWs, and the as-prepared g-CHWs/PLLA nanofiber membrane showed relative smooth and uniform fiber. As a result, the tensile strength and modulus of the g-CHWs/PLLA nanofiber membrane were obviously superior to those of the pure PLLA and CHWs/PLLA nanofiber membranes. Cells culture results indicated that g-CHWs/PLLA nanofiber membrane is more effectively in promoting MC3T3-E1 cells adhesion, spreading and proliferation than pure PLLA and CHWs/PLLA nanofiber membrane.

Antibacterial activity and cytocompatibility of chitooligosaccharide-modified polyurethane membrane via polydopamine adhesive layer

The aim of this study was to provide a convenient surface modification method for polyurethane (PU) membrane and evaluate its influence on hydrophilicity, antibacterial activity and cell functions, which are the most important factors for wound dressings. For this purpose, chitooligosaccharide (COS) was modified onto the surface of PU membrane based on the self-polymerization of dopamine (DOPA). Surface composition, morphology, hydrophilicity and surface energy of the original and modified PU membranes were characterized. Surface roughness and hydrophilicity of the PU membrane were obviously increased by modified with polydopamine (PDOPA) and COS. Antibacterial experiment against Escherichia coli and Staphylococcus aureus indicated that antibacterial activity of PU membrane increased only slightly by modified with PDOPA, but increased significantly by further modified with COS. Cells culture results revealed that COS-functionalized PU membrane is more beneficial to the adhesion and proliferation of NIH-3T3 cells compared to the original and PDOPA-modified PU membranes.

Mechanical properties and osteogenic activity of poly( l -lactide) fibrous membrane synergistically enhanced by chitosan nanofibers and polydopamine layer

To synergistically improve the mechanical properties and osteogenic activity of electrospinning poly(l-lactide) (PLLA) membrane, chitosan (CS) nanofibers were firstly introduced to prepare sub-micro and nanofibers interpenetrated PLLA/CS membrane, which was further surface modified with a polydopamine (PDA) layer to obtain PLLA/CS-PDA. Surface morphology, porosity, surface area and hydrophilicity of the obtained fibrous membranes were studied in detail. As compared to pure PLLA, the significant increase in the mechanical properties of the PLLA/CS, and especially of the PLLA/CS-PDA, was confirmed by tensile testing both in dry and wet states. Cells culture results indicated that both the PLLA/CS and PLLA/CS-PDA membranes, especially the latter, were more beneficial to adhesion, spreading and proliferation, as well as up-regulating alkaline phosphate activity and calcium deposition of MC3T3-E1 cells than PLLA membrane. Results suggested there was a synergistic effect of the CS nanofibers and PDA layer on the mechanical properties and osteogenic activity of PLLA membrane.

Icariin immobilized electrospinning poly(l-lactide) fibrous membranes via polydopamine adhesive coating with enhanced cytocompatibility and osteogenic activity

In this study, icariin (ICA), one of the main active ingredients of Herba Epimedii for osteogenesis, was applied to functionalize electrospinning poly(l-lactide) (PLLA) fibrous membrane via an intermediate layer of polydopamine (PDA) to obtain enhanced cytocompatibility and osteogenic activity. For this purpose, an array of PDA-coated PLLA fibrous membranes (PLLA-0.5PDA, PLLA-1PDA, PLLA-2PDA, PLLA-5PDA) and ICA-modified PLLA-2PDA fibrous membranes (PLLA-2PDA-10ICA, PLLA-2PDA-20ICA, PLLA-2PDA-40ICA) were successively prepared. Successful modification of PDA and ICA onto PLLA fibrous membranes was verified by field emission scanning electron microscope (FESEM), thermogravimetric analysis (TGA) and X-ray photoelectron spectroscopy (XPS). Besides, the hydrophilicity as well as tensile properties of PLLA fibrous membrane were improved after surface modified with PDA and ICA. In vitro cells culture experiments revealed that the adhesion, proliferation and osteogenic differentiation of MC3T3-E1 cells on the PLLA fibrous membrane were significantly improved by successively immobilized with PDA and ICA. Moreover, the concentration of ICA immobilized on the fibrous membranes has the complicated effects on the MC3T3-E1 cells behavior. The PLLA-2PDA-ICA fibrous membranes with low ICA concentration promoted the cell adhesion and proliferation, but on the contrary, those with high ICA concentration were more beneficial to the enhancement in ALP activity and calcium deposition.

Deferoxamine immobilized poly(D,L-lactide) membrane via polydopamine adhesive coating: The influence on mouse embryo osteoblast precursor cells and human umbilical vein endothelial cells

Osteogenesis and angiogenesis play the prominent role in the bone regeneration. In this study, deferoxamine (DFO), an induced agent for osteogenesis and angiogenesis, was modified onto the surface of poly(D,L-lactide) (PDLLA) membrane via a facile and convenient approach based on the self-polymerization of dopamine (DOPA). The surface composition, morphology, hydrophilicity and surface energy of the original and modified PDLLA membranes were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), scanning electronic microscopy (SEM), atomic force microscopy (AFM) and contact angle measurement. The surface roughness and hydrophilicity of the PDLLA membrane were obviously increased by introducing either the single polydopamine (PDOPA) or the dual layers of PDOPA and DFO. In vitro cells culture experiments indicated that both the PDLLA/PDOPA and PDLLA/PDOPA-DFO composite membranes were more beneficial to the attachment, proliferation and spreading of MC3T3-E1 cells and HUVECs compared to the original PDLLA membrane. The PDLLA/PDOPA-DFO membrane was supportive for the proliferation of both MC3T3-E1 cells and HUVECs, and especially for HUVECs. The results suggested that the as-prepared PDLLA/PDOPA-DFO composite can be expected to be used as a promising bone regenerative material with promoted angiogenesis.

Fabrication, antibacterial activity and cytocompatibility of quaternary ammonium chitooligosaccharide functionalized polyurethane membrane via polydopamine adhesive layer

In this study, to enhance the antibacterial activity and cytocompatibility of the electrospinning polyurethane (PU) fibrous membrane, quaternary ammonium chitooligosaccharide (G-COS) was immobilized on the fibrous membrane surface via an intermediate layer of polydopamine (PDOPA) to obtain the G-COS functionalized PU (G-C-D-PU), as a control, chitooligosaccharide (COS) functionalized PU fibrous membrane (C-D-PU) was prepared, too. Surface composition, morphology, hydrophilicity and surface energy of the original and modified PU fibrous membranes were characterized, which revealed that the surface roughness and hydrophilicity of the PU fibrous membrane were obviously increased by modified with COS and G-COS, respectively. Antibacterial experiment against E. coli and S. aureus indicated that antibacterial activity of the G-C-D-PU fibrous membrane was markedly superior to that of pure PU and C-D-PU fibrous membranes. In vitro cells culture experiments revealed that the adhesion and proliferation of NIH-3T3 cells on the PU fibrous membrane were improved by successively immobilized with PDOPA and COS as well as G-COS with the concentration of 2 g/L and 6 g/L. Moreover, the G-C-D-PU fibrous membranes with relative high G-COS content were more beneficial to the enhancement of antibacterial activity, but on the contrary, those with relative low G-COS content were more in favor of cell attachment and proliferation.

Synthesis and Characterization of Surface-Grafted Magnesium Oxide Whiskers with poly(L-lactide)

Firstly, Magnesium oxide (MgO) whiskers were prepared by calcination of magnesium carbonate (MgCO3) whiskers which were obtained by solution method. Then, surface-grafted MgO whiskers with poly (L-lactide) were synthesized by bulk ring-opening polymerization of L-lactide onto the surface of MgO whiskers. The MgO whiskers and surface-grafted MgO whiskers were characterized by scanning electron microscope (SEM), transmission electron microscope (TEM), x-ray diffraction (XRD) and fourier transformation infrared (FTIR). Results showed that MgO whiskers diameter in the range of 0.02-0.5μm, the length is between 10-80μm and well dispersed. A new characteristic stretching vibration absorption peak of C=O apppeared in the IR spectrum of the surface-grafted MgO whiskers, which suggested that poly (L-lactide) chains were successfully grafted on the surface of MgO whiskers.