Wenjie Mai

Low-Cost High-Performance Solid-State Asymmetric Supercapacitors Based on MnO2 Nanowires and Fe2O3 Nanotubes

A low-cost high-performance solid-state flexible asymmetric supercapacitor (ASC) with α-MnO2 nanowires and amorphous Fe2O3 nanotubes grown on flexible carbon fabric is first designed and fabricated. The assembled novel flexible ASC device with an extended operating voltage window of 1.6 V exhibits excellent performance such as a high energy density of 0.55 mWh/cm(3) and good rate capability. The ASC devices can find numerous applications as effective power sources, such as powering color-switchable sun glasses and smart windows.

Hydrogenated ZnO Core–Shell Nanocables for Flexible Supercapacitors and Self-Powered Systems

Although MnO2 is a promising material for supercapacitors (SCs) due to its excellent electrochemical performance and natural abundance, its wide application is limited by poor electrical conductivity. Inspired by our results that the electrochemical activity and electrical conductivity of ZnO nanowires were greatly improved after hydrogenation, we designed and fabricated hydrogenated single-crystal ZnO@amorphous ZnO-doped MnO2 core-shell nanocables (HZM) on carbon cloth as SC electrodes, showing excellent performance such as areal capacitance of 138.7 mF/cm(2) and specific capacitance of 1260.9 F/g. Highly flexible all-solid-state SCs were subsequently assembled with these novel HZM electrodes using polyvinyl alcohol/LiCl electrolyte. The working devices achieved very high total areal capacitance of 26 mF/cm(2) and retained 87.5% of the original capacitance even after 10 000 charge/discharge cycles. An integrated power pack incorporating series-wound SCs and dye-sensitized solar cells was demonstrated for stand-alone self-powered systems.

Flexible Piezotronic Strain Sensor

Strain sensors based on individual ZnO piezoelectric fine-wires (PFWs; nanowires, microwires) have been fabricated by a simple, reliable, and cost-effective technique. The electromechanical sensor device consists of a single electrically connected PFW that is placed on the outer surface of a flexible polystyrene (PS) substrate and bonded at its two ends. The entire device is fully packaged by a polydimethylsiloxane (PDMS) thin layer. The PFW has Schottky contacts at its two ends but with distinctly different barrier heights. The I- V characteristic is highly sensitive to strain mainly due to the change in Schottky barrier height (SBH), which scales linear with strain. The change in SBH is suggested owing to the strain induced band structure change and piezoelectric effect. The experimental data can be well-described by the thermionic emission-diffusion model. A gauge factor of as high as 1250 has been demonstrated, which is 25% higher than the best gauge factor demonstrated for carbon nanotubes. The strain sensor developed here has applications in strain and stress measurements in cell biology, biomedical sciences, MEMS devices, structure monitoring, and more.

Fiber-Based All-Solid-State Flexible Supercapacitors for Self-Powered Systems

All-solid-state flexible supercapacitors based on a carbon/MnO(2) (C/M) core-shell fiber structure were fabricated with high electrochemical performance such as high rate capability with a scan rate up to 20 V s(-1), high volume capacitance of 2.5 F cm(-3), and an energy density of 2.2 × 10(-4) Wh cm(-3). By integrating with a triboelectric generator, supercapacitors could be charged and power commercial electronic devices, such as a liquid crystal display or a light-emitting-diode, demonstrating feasibility as an efficient storage component and self-powered micro/nanosystems.

Gigantic enhancement in response and reset time of ZnO UV nanosensor by utilizing Schottky contact and surface functionalization

UV response of ZnO nanowire nanosensor has been studied under ambient condition. By utilizing Schottky contact instead of Ohmic contact in device fabrication, the UV sensitivity of the nanosensor has been improved by four orders of magnitude, and the reset time has been drastically reduced from approximately 417 to approximately 0.8 s. By further surface functionalization with function polymers, the reset time has been reduced to approximately 20 ms even without correcting the electronic response of the measurement system. These results demonstrate an effective approach for building high response and fast reset UV detectors.

Patterned growth of vertically aligned ZnO nanowire arrays on inorganic substrates at low temperature without catalyst.

We report an approach for growing aligned ZnO nanowire arrays with a high degree control over size, orientation, dimensionality, uniformity, and possibly shape. Our method combines e-beam lithography and a low temperature hydrothermal method to achieve patterned and aligned growth of ZnO NWs at <100degreesC on general inorganic substrates, such as Si and GaN, without using catalyst. This approach opens up the possibility of applying ZnO nanowires as sensor arrays, piezoelectric antenna arrays, two-dimensional photonic crystals, IC interconnects, and nanogenerators.

All Metal Nitrides Solid‐State Asymmetric Supercapacitors

Two metal nitrides, TiN porous layers and Fe2 N nanoparticles, are grown uniformly with the assistance of atomic layer deposition on vertically aligned graphene nanosheets and used as the cathode and anode for solid-state supercapacitors, respectively. Full cells are constructed and show good flexibility, high-rate capability, and 98% capacitance retention after 20,000 cycles.

Synergistic Antibacterial Brilliant Blue/Reduced Graphene Oxide/Quaternary Phosphonium Salt Composite with Excellent Water Solubility and Specific Targeting Capability

A water-soluble brilliant blue/reduced graphene oxide/tetradecyltriphenylphosphonium bromide composite (BB-rGO-TTP) was prepared by using noncovalent brilliant blue-functionalized reduced graphene oxide (BB-rGO) as the tetradecyltriphenylphosphonium bromide (TTP) carrier. Antibacterial performance of this novel composite was investigated for both Gram-positive and Gram-negative bacteria. The results showed that the novel BB-rGO-TTP, combing the advantages of graphene and TTP, displayed excellent synergistic antibacterial activity, specific targeting capability, water solubility, and mild cytotoxicity, suggesting the great potential application as sprayable graphene-based antibacterial solutions.

Large‐Scale Fabrication of Pseudocapacitive Glass Windows that Combine Electrochromism and Energy Storage

Multifunctional glass windows that combine energy storage and electrochromism have been obtained by facile thermal evaporation and electrodeposition methods. For example, WO3 films that had been deposited on fluorine-doped tin oxide (FTO) glass exhibited a high specific capacitance of 639.8 F g(-1). Their color changed from transparent to deep blue with an abrupt decrease in optical transmittance from 91.3% to 15.1% at a wavelength of 633 nm when a voltage of -0.6 V (vs. Ag/AgCl) was applied, demonstrating its excellent energy-storage and electrochromism properties. As a second example, a polyaniline-based pseudocapacitive glass was also developed, and its color can change from green to blue. A large-scale pseudocapacitive WO3-based glass window (15×15 cm(2)) was fabricated as a prototype. Such smart pseudocapacitive glass windows show great potential in functioning as electrochromic windows and concurrently powering electronic devices, such as mobile phones or laptops.

Worm-like amorphous MnO2 nanowires grown on textiles for high-performance flexible supercapacitors

A novel class of amorphous MnO2 nanowires with a worm-like (WL) nanostructure was prepared by electrodeposition and a possible formation mechanism was proposed. The specific capacitance of WL amorphous MnO2 was 2–3 times larger than that of its crystalline cotton-like MnO2 counterpart. The unique WL amorphous nanostructure is believed to significantly facilitate the electrochemical performance of MnO2. Flexible solid-state symmetric supercapacitors assembled with WL-MnO2 electrodes exhibited a high energy density of 6.3 W h kg−1. These results demonstrate that the amorphous WL nanostructure grown on carbon fabric can serve as a promising electrode material for flexible and portable energy storage devices.