Wenping Sun

Cobalt Sulfide Nanosheet/Graphene/Carbon Nanotube Nanocomposites as Flexible Electrodes for Hydrogen Evolution

Flexible three-dimensional (3D) nanoarchitectures have received tremendous interest recently because of their potential applications in wearable electronics, roll-up displays, and other devices. The design and fabrication of a flexible and robust electrode based on cobalt sulfide/reduced graphene oxide/carbon nanotube (CoS2 /RGO-CNT) nanocomposites are reported. An efficient hydrothermal process combined with vacuum filtration was used to synthesize such composite architecture, which was then embedded in a porous CNT network. This conductive and robust film is evaluated as electrocatalyst for the hydrogen evolution reaction. The synergistic effect of CoS2 , graphene, and CNTs leads to unique CoS2 /RGO-CNT nanoarchitectures, the HER activity of which is among the highest for non-noble metal electrocatalysts, showing 10 mA cm(-2) current density at about 142 mV overpotentials and a high electrochemical stability.

An Advanced Sodium‐Ion Battery Composed of Carbon Coated Na3V2(PO4)3 in a Porous Graphene Network

A 3D hierarchical meso- and macroporous Na3V2(PO4)3-based hybrid cathode with connected Na ion/electron pathways is developed for ultra-fast charge and discharge sodium-ion batteries. It delivers an excellent rate capability (e.g., 86 mA h g(-1) at 100 C) and outstanding cycling stability (e.g., 64% retention after 10,000 cycles at 100 C), indicating its superiority in practical applications.

One‐Pot Synthesis of Tunable Crystalline Ni3S4@Amorphous MoS2 Core/Shell Nanospheres for High‐Performance Supercapacitors

Transition metal sulfides gain much attention as electrode materials for supercapacitors due to their rich redox chemistry and high electrical conductivity. Designing hierarchical nanostructures is an efficient approach to fully utilize merits of each component. In this work, amorphous MoS(2) is firstly demonstrated to show specific capacitance 1.6 times as that of the crystalline counterpart. Then, crystalline core@amorphous shell (Ni(3)S(4)@MoS(2)) is prepared by a facile one-pot process. The diameter of the core and the thickness of the shell can be independently tuned. Taking advantages of flexible protection of amorphous shell and high capacitance of the conductive core, Ni(3)S(4) @amorphous MoS(2) nanospheres are tested as supercapacitor electrodes, which exhibit high specific capacitance of 1440.9 F g(-1) at 2 A g(-1) and a good capacitance retention of 90.7% after 3000 cycles at 10 A g(-1). This design of crystalline core@amorphous shell architecture may open up new strategies for synthesizing promising electrode materials for supercapacitors.

Two-Dimensional Tin Disulfide Nanosheets for Enhanced Sodium Storage.

Sodium-ion batteries (SIBs) are considered as complementary alternatives to lithium-ion batteries for grid energy storage due to the abundance of sodium. However, low capacity, poor rate capability, and cycling stability of existing anodes significantly hinder the practical applications of SIBs. Herein, ultrathin two-dimensional SnS2 nanosheets (3-4 nm in thickness) are synthesized via a facile refluxing process toward enhanced sodium storage. The SnS2 nanosheets exhibit a high apparent diffusion coefficient of Na(+) and fast sodiation/desodiation reaction kinetics. In half-cells, the nanosheets deliver a high reversible capacity of 733 mAh g(-1) at 0.1 A g(-1), which still remains up to 435 mAh g(-1) at 2 A g(-1). The cell has a high capacity retention of 647 mA h g(-1) during the 50th cycle at 0.1 A g(-1), which is by far the best for SnS2, suggesting that nanosheet morphology is beneficial to improve cycling stability in addition to rate capability. The SnS2 nanosheets also show encouraging performance in a full cell with a Na3V2(PO4)3 cathode. In addition, the sodium storage mechanism is investigated by ex situ XRD coupled with high-resolution TEM. The high specific capacity, good rate capability, and cycling durability suggest that SnS2 nanosheets have great potential working as anodes for high-performance SIBs.

Alloy‐Based Anode Materials toward Advanced Sodium‐Ion Batteries

Sodium-ion batteries (SIBs) are considered as promising alternatives to lithium-ion batteries owing to the abundant sodium resources. However, the limited energy density, moderate cycling life, and immature manufacture technology of SIBs are the major challenges hindering their practical application. Recently, numerous efforts are devoted to developing novel electrode materials with high specific capacities and long durability. In comparison with carbonaceous materials (e.g., hard carbon), partial Group IVA and VA elements, such as Sn, Sb, and P, possess high theoretical specific capacities for sodium storage based on the alloying reaction mechanism, demonstrating great potential for high-energy SIBs. In this review, the recent research progress of alloy-type anodes and their compounds for sodium storage is summarized. Specific efforts to enhance the electrochemical performance of the alloy-based anode materials are discussed, and the challenges and perspectives regarding these anode materials are proposed.

Multifunctional Architectures Constructing of PANI Nanoneedle Arrays on MoS2 Thin Nanosheets for High-Energy Supercapacitors

Multifunctional MoS2 @PANI (polyaniline) pseudo-supercapacitor electrodes consisting of MoS2 thin nanosheets and PANI nanoarrays are fabricated via a large-scale approach. The superior capacitance retention is retained up to 91% after 4000 cycles and a high energy density of 106 Wh kg(-1) is delivered at a power density of 106 kW kg(-1) .

Reversible conversion-alloying of Sb2O3 as a high-capacity, high-rate, and durable anode for sodium ion batteries.

Sodium ion batteries are attracting ever-increasing attention for the applications in large/grid scale energy storage systems. However, the research on novel Na-storage electrode materials is still in its infancy, and the cycling stability, specific capacity, and rate capability of the reported electrode materials cannot satisfy the demands of practical applications. Herein, a high performance Sb(2)O(3) anode electrochemically reacted via the reversible conversion-alloying mechanism is demonstrated for the first time. The Sb(2)O(3) anode exhibits a high capacity of 550 mAh g(-1) at 0.05 A g(-1) and 265 mAh g(-1) at 5 A g(-1). A reversible capacity of 414 mAh g(-1) at 0.5 A g(-1) is achieved after 200 stable cycles. The synergistic effect involving conversion and alloying reactions promotes stabilizing the structure of the active material and accelerating the kinetics of the reaction. The mechanism may offer a well-balanced approach for sodium storage to create high capacity and cycle-stable anode materials.

Electrostatic Spray Deposition of Porous SnO2/Graphene Anode Films and Their Enhanced Lithium-Storage Properties

Porous SnO₂/graphene composite thin films are prepared as anodes for lithium ion batteries by the electrostatic spray deposition technique. Reticular-structured SnO₂ is formed on both the nickel foam substrate and the surface of graphene sheets according to the scanning electron microscopy (SEM) results. Such an assembly mode of graphene and SnO₂ is highly beneficial to the electrochemical performance improvement by increasing the electrical conductivity and releasing the volume change of the anode. The novel engineered anode possesses 2134.3 mA h g⁻¹ of initial discharge capacity and good capacity retention of 551.0 mA h g⁻¹ up to the 100th cycle at a current density of 200 mA g⁻¹. This anode also exhibits excellent rate capability, with a reversible capacity of 507.7 mA h g⁻¹ after 100 cycles at a current density of 800 mA g⁻¹. The results demonstrate that such a film-type hybrid anode shows great potential for application in high-energy lithium-ion batteries.

Biochemistry-enabled 3D foams for ultrafast battery cathodes

Metal vanadium phosphates (MVP), particularly Li3V2(PO4)3 (LVP) and Na3V2(PO4)3 (NVP), are regarded as the next-generation cathode materials in lithium/sodium ion batteries. These materials possess desirable properties such as high stability, theoretical capacity, and operating voltages. Yet, low electrical/ionic conductivities of LVP and NVP have limited their applications in demanding devices such as electric vehicles. In this work, a novel synthesis route for the preparation of LVP/NVP micro/mesoporous 3D foams via assembly of elastin-like polypeptides is demonstrated. The as-synthesized MVP 3D foams consist of microporous networks of mesoporous nanofibers, where the surfaces of individual fibers are covered with MVP nanocrystallites. TEM images further reveal that LVP/NVP nanoparticles are about 100-200 nm in diameter, with each particle enveloped by a 5 nm thick carbon shell. The MVP 3D foams prepared in this work exhibit ultrafast rate capabilities (79 mA h g(-1) at 100C and 66 mA h g(-1) at 200C for LVP 3D foams; 73 mA h g(-1) at 100C and 51 mA h g(-1) at 200C for NVP 3D foams) and excellent cycle performance (almost 100% performance retention after 1000 cycles at 100C); their properties are far superior compared to current state-of-the-art active materials.

Controlled synthesis of zinc cobalt sulfide nanostructures in oil phase and their potential applications in electrochemical energy storage

A unique controlled synthesis of zinc cobalt sulfide nanostructures is obtained by a facile oil phase approach. Nanoartichokes composed of self-assembled nanosheets and nanoparticles have been fabricated by using different sulfur sources. The application of such nanomaterials is demonstrated as electrodes for supercapacitors and lithium-ion batteries. Serving as lithium-ion battery electrodes, the ZnxCo1−xS nanoartichokes deliver a higher specific capacity of 750 mA h g−1 during the 100th cycle as compared to only 220 mA h g−1 for nanoparticles. In supercapacitor tests, the ZnxCo1−xS nanoartichokes possess an improved specific capacitance (486.2 F g−1 at a current density of 2.0 A g−1) and excellent cycling stability (retaining 86.4% after 2000 cycles), both of which are much higher than those of nanoparticles (e.g. 406.7 F g−1 and 73.3%). This effective nanostructure design of ternary transition metal sulfides could provide a promising method to construct high-performance materials for energy and environment applications.