Wenwu Qin

Functionalisation of fluorescent BODIPY dyes by nucleophilic substitution

The BODIPY chromophore can be easily modified by nucleophilic mono- or disubstitution of 3,5-dichloroBODIPY with O-, N-, S- and C-nucleophiles. Absorption and fluorescence spectral data of the new BODIPY derivatives are also reported.

Development and Applications of Fluorescent Indicators for Mg2+ and Zn2+

In a study of the spectroscopic behavior of two Schiff base derivatives, salicylaldehyde salicylhydrazone (1) and salicylaldehyde benzoylhydrazone (2), Schiff base 1 has high selectivity for Zn(2+) ion not only in abiotic systems but also in living cells. The ion selectivity of 1 for Zn(2+) can be switched for Mg(2+) by swapping the solvent from ethanol-water to DMF (N,N-dimethylformamide)-water mixtures. Imine 2 is a good fluorescent probe for Zn(2+) in ethanol-water media. Many other ions tested, such as Li(+), Na(+), Al(3+), K(+), Ca(2+), Cr(3+), Mn(2+), Fe(3+), Co(2+), Ni(2+), Cu(2+), Ag(+), Cd(2+), Sn(2+), Ba(2+), Hg(2+), and Pb(2+), failed to induce any spectral change in various solvents. The selectivity mechanism of 1 and 2 for metal ions is based on a combinational effect of proton transfer (ESPT), C═N isomerization, and chelation-enhanced fluorescence (CHEF). The coordination modes of the complexes were investigated.

Design of a Semirigid Molecule as a Selective Fluorescent Chemosensor for Recognition of Cd(II)

A new 8-hydroxyquinoline-based chemosensor possessing a semirigid structure was designed, and its fluorescent sensing behavior toward metalions was investigated. A prominent fluorescence enhancement only for Cd(2+) was found in aqueous methanol solution. The results clearly suggest that the specific semirigid structure could selectively accommodate Cd(2+) according to ionic radius, which would effectively suppress the intramolecular radiationless transitions from the n pi* state to enhance the fluorescence response.

A selective, cell-permeable fluorescent probe for Al3+ in living cells

The synthesis and evaluation of a novel Schiff-base fluorescent probe L for detection of Al(3+) are described. The structure of L was determined by X-ray and other spectroscopic data. The fluorescent spectra changes and microscopy images show that indicator L is highly selective for Al(3+) not only in abiotic systems but also in living cells. Other metal ions failed to respond. The new probe could be used as an efficient tool for Al(3+) monitoring in the environment and biological systems.

Synthesis, Spectroscopy, Crystal Structure, Electrochemistry, and Quantum Chemical and Molecular Dynamics Calculations of a 3-Anilino Difluoroboron Dipyrromethene Dye

An asymmetrically substituted fluorescent difluoroboron dipyrromethene (BODIPY) dye, with a phenylamino group at the 3-position of the BODIPY chromophore, has been synthesized by nucleophilic substitution of 3,5-dichloro-8-(4-tolyl)-4,4-difluoro-4-bora-3a,4a-diaza-s-indacene. The solvent-dependent spectroscopic and photophysical properties have been investigated by means of UV-vis spectrophotometry and steady-state and time-resolved fluorometry and reflect the large effect of the anilino substituent on the fluorescence characteristics. The compound has a low fluorescence quantum yield in all but the apolar solvents cyclohexane, toluene, and chloroform. Its emission maxima in a series of solvents from cyclohexane to methanol are red-shifted by approximately 50 nm in comparison to classic BODIPY derivatives. Its oxidation potential in dichloromethane is at ca. 1.14 V versus Ag/AgCl. The absorption bandwidths and Stokes shifts are much larger than those of typical, symmetric difluoroboron dipyrromethene dyes. The values of the fluorescence rate constant are in the (1.4-1.7) x 10(8) s(-1) range and do not vary much between the solvents studied. X-ray diffraction analysis shows that the BODIPY core is planar. Molecular dynamics simulations show that there is no clear indication for aggregates in solution.

Ratiometric, Fluorescent BODIPY Dye with Aza Crown Ether Functionality: Synthesis, Solvatochromism, and Metal Ion Complex Formation

A new pH and metal ion-responsive BODIPY-based fluorescent probe with an aza crown ether subunit has been synthesized via condensation of 4-(1,4,7,10-tetraoxa-13-aza-cyclopentadec-13-yl)-benzaldehyde with the appropriate 1,3,5,7-tetramethyl substituted boron dipyrromethene moiety. Steady-state and time-resolved fluorometries have been used to study the spectroscopic and photophysical characteristics of this probe in various solvents. The fluorescence properties of the dye are strongly solvent dependent: increasing the solvent polarity leads to lower fluorescence quantum yields and lifetimes, and the wavelength of maximum fluorescence emission shifts to the red. The Catalan solvent scales are found to be the most suitable for describing the solvatochromic shifts of the fluorescence emission. Fluorescence decay profiles of the dye can be described by a single-exponential fit in nonprotic solvents, whereas two decay times are found in alcohols. Protonation as well as complex formation with several metal ions are investigated in acetonitrile as solvent via fluorometric titrations. The aza crown ether dye undergoes a reversible (de)protonation reaction (pKa = 0.09) and shows a approximately 50 nm blue shift in the excitation spectra and a 10-fold fluorescence increase upon protonation. The compound also forms 1:1 complexes with several metal ions (Li(+), Na(+), Mg(2+), Ca(2+), Ba(2+), Zn(2+)), producing large blue shifts in the excitation spectra and significant cation-induced fluorescence amplifications.

Olive-Shaped Chiral Supramolecules: Simultaneous Self-Assembly of Heptameric Lanthanum Clusters and Carbon Dioxide Fixation†

Clusters last stand: Six chiral reduced Schiff base ligands containing amino acids and seven La(III) ions self-assemble to form a novel heptameric lanthanum supramolecule with the aid of the CO(3)(2-) ion (see picture). The cluster exists as a single chiral triple helix. The CO(3)(2-) ion, which is derived from atmospheric CO(2) , adopts a rare mu(3)-tridentate bridging mode that links three La(III) ions, thus allowing the cluster to efficiently fix CO(2).

Synthesis and spectroscopic characterisation of BODIPY® based fluorescent off–on indicators with low affinity for calcium

Two fluorescent off-on Ca2+ indicators based on APTRA (o-aminophenol-N,N,O-triacetic acid) as low-affinity ligand for Ca2+ and BODIPY(4,4-difluoro-4-bora-3a,4a-diaza-s-indacene) as a fluorophore were synthesized. The new BODIPY-APTRA compounds absorb in the visible spectrum, with absorption maxima from 505 nm to 570 nm, and have fluorescence spectra that span the visible spectrum, with emission maxima ranging from 525 nm to 625 nm dependent on the substituents at the alpha-positions to the nitrogen atoms. The indicators show a large increase of the fluorescence quantum yield upon increasing Ca2+ concentration. The ground-state dissociation constants Kd estimated at 20 degrees C in 100 mM KCl aqueous buffered solution, pH 7.20, for the two complexes with Ca2+ were found to be around 100 microM.

Rational Design, Synthesis, and Spectroscopic and Photophysical Properties of a Visible‐Light‐Excitable, Ratiometric, Fluorescent Near‐Neutral pH Indicator Based on BODIPY

A visible-light-excitable, ratiometric, brightly fluorescent pH indicator for measurements in the pH range 5-7 has been designed and synthesized by conjugatively linking the BODIPY fluorophore at the 3-position to the pH-sensitive ligand imidazole through an ethenyl bridge. The probe is available as cell membrane permeable methyl ester 8-(4-carbomethoxyphenyl)-4,4-difluoro-3-[2-(1H-imidazol-4-yl)ethenyl]-1,5,7-trimethyl-3a,4a-diaza-4-bora-s-indacene (I) and corresponding water-soluble sodium carboxylate, sodium 8-(4-carboxylatophenyl)-4,4-difluoro-3-[2-(1H-imidazol-4-yl)ethenyl]-1,5,7-trimethyl-3a,4a-diaza-4-bora-s-indacene (II). The fluorescence quantum yield Φ(f) of ester I is very high (0.8-1.0) in the organic solvents tested. The fluorescence lifetime (ca. 4 ns) of I in organic solvents with varying polarity/polarizability (from cyclohexane to acetonitrile) is independent of the solvent with a fluorescence rate constant k(f) of 2.4×10(8) s(-1). Probe I is readily loaded in the cytosol of live cells, where its high fluorescence intensity remains nearly constant over an extended time period. Water-soluble indicator II exhibits two acid-base equilibria in aqueous solution, characterized by pK(a) values of 6.0 and 12.6. The Φ(f) value of II in aqueous solution is high: 0.6 for the cationic and anionic forms of the imidazole ligand, and 0.8 for neutral imidazole. On protonation-deprotonation in the near-neutral pH range, UV/Vis absorption and fluorescence spectral shifts along with isosbestic and pseudo-isoemissive points are observed. This dual-excitation and dual-emission pH indicator emits intense green-yellow fluorescence at lower pH and intense orange fluorescence at higher pH. The influence of ionic strength and buffer concentration on the absorbance and steady-state fluorescence of II has also been investigated. The apparent pK(a) of the near-neutral acid-base equilibrium determined by spectrophotometric and fluorometric titration is nearly independent of the added buffer and salt concentration. In aqueous solution in the absence of buffer and in the pH range 5.20-7.45, dual exponential fluorescence decays are obtained with decay time τ(1)=4.3 ns for the cationic and τ(2)=3.3 ns for the neutral form of II. The excited-state proton exchange of II at near-neutral pH becomes reversible on addition of phosphate (H(2)PO(4)(-)/HPO(4)(2-)) buffer, and a pH-dependent change of the fluorescence decay times is induced. Global compartmental analysis of fluorescence decay traces collected as a function of pH and phosphate buffer concentration was used to recover values of the deactivation rate constants of the excited cationic (k(01)=2.4×10(8) s(-1)) and neutral (k(02)=3.0×10(8) s(-1)) forms of II.

Aroylhydrazone derivative as fluorescent sensor for highly selective recognition of Zn2+ ions: syntheses, characterization, crystal structures and spectroscopic properties

A new Zn(2+) fluorescent chemosensor N-(3,5-di-tert-butylsalicylidene)-2-hydroxybenzoylhydrazine (H(3)L(1)) and its complexes [Zn(HL(1))C(2)H(5)OH](∞) (1) and [Cu(HL(1))(H(2)O)]CH(3)OH (2) have been synthesized and characterized in terms of their crystal structures, absorption and emission spectra. H(3)L(1) displays high selectivity for Zn(2+) over Na(+), K(+), Mg(2+), Ca(2+) and other transition metal ions in Tris-HCl buffer solution (pH = 7.13, EtOH-H(2)O = 8u2009:u20092 v/v). To obtain insight into the relation between the structure and selectivity, a similar ligand 3,5-di-tert-butylsalicylidene benzoylhydrazine (H(2)L(2)), which lacks the hydroxyl group substituent in salicyloyl hydrazide compared with H(3)L(1), and its complex [Zn(2)(HL(2))(2)(CH(3)COO)(2)(C(2)H(5)OH)] (3), [Co(L(2))(2)][Co(DMF)(4)(C(2)H(5)OH)(H(2)O)] (4), [Fe(HL(2))(2)]Cl·2CH(3)OH (5), have also been investigated as a reference. H(3)L(1) exhibits improved selectivity for Zn(2+) compared to H(2)L(2). The findings indicate that the hydroxyl group substituent exerts an effect on the spectroscopic properties, complex structures and selectivity of the fluorescent sensor.