Wiel H. Evers

Long-range orientation and atomic attachment of nanocrystals in 2D honeycomb superlattices

Nanoparticle lattices and surfaces The challenge of resolving the details of the surfaces or assemblies of colloidal semiconductor nanoparticles can be overcome if several characterization methods are used (see the Perspective by Boles and Talapin). Boneschanscher et al. examined honeycomb superlattices of lead selenide nanocrystals formed by the bonding of crystal faces using several methods, including high-resolution electron microscopy and tomography. The structure had octahedral symmetry with the nanocrystals distorted through “necking”: the expansion of the contact points between the nanocrystals. Zherebetskyy et al. used a combination of theoretical calculations and spectroscopic methods to study the surface layer of lead sulfide nanocrystals synthesized in water. In addition to the oleic acid groups that capped the nanocrystals, hydroxyl groups were present as well. Science, this issue p. 1377, p. 1380; see also p. 1340 Metal-chalcogenide nanocrystals undergo necking and large-scale atomic rearrangements when forming a surface lattice. [Also see Perspective by Boles and Talapin] Oriented attachment of synthetic semiconductor nanocrystals is emerging as a route for obtaining new semiconductors that can have Dirac-type electronic bands such as graphene, but also strong spin-orbit coupling. The two-dimensional (2D) assembly geometry will require both atomic coherence and long-range periodicity of the superlattices. We show how the interfacial self-assembly and oriented attachment of nanocrystals results in 2D metal chalcogenide semiconductors with a honeycomb superlattice. We present an extensive atomic and nanoscale characterization of these systems using direct imaging and wave scattering methods. The honeycomb superlattices are atomically coherent and have an octahedral symmetry that is buckled; the nanocrystals occupy two parallel planes. Considerable necking and large-scale atomic motion occurred during the attachment process.

Low-dimensional semiconductor superlattices formed by geometric control over nanocrystal attachment.

Oriented attachment, the process in which nanometer-sized crystals fuse by atomic bonding of specific crystal facets, is expected to be more difficult to control than nanocrystal self-assembly that is driven by entropic factors or weak van der Waals attractions. Here, we present a study of oriented attachment of PbSe nanocrystals that counteract this tuition. The reaction was studied in a thin film of the suspension casted on an immiscible liquid at a given temperature. We report that attachment can be controlled such that it occurs with one type of facets exclusively. By control of the temperature and particle concentration we obtain one- or two-dimensional PbSe single crystals, the latter with a honeycomb or square superimposed periodicity in the nanometer range. We demonstrate the ability to convert these PbSe superstructures into other semiconductor compounds with the preservation of crystallinity and geometry.

Entropy-Driven Formation of Binary Semiconductor-Nanocrystal Superlattices

One of the main reasons for the current interest in colloidal nanocrystals is their propensity to form superlattices, systems in which (different) nanocrystals are in close contact in a well-ordered three-dimensional (3D) geometry resulting in novel material properties. However, the principles underlying the formation of binary nanocrystal superlattices are not well understood. Here, we present a study of the driving forces for the formation of binary nanocrystal superlattices by comparing the formed structures with full free energy calculations. The nature (metallic or semiconducting) and the size-ratio of the two nanocrystals are varied systematically. With semiconductor nanocrystals, self-organization at high temperature leads to superlattices (AlB(2), NaZn(13), MgZn(2)) in accordance with the phase diagrams for binary hard-sphere mixtures; hence entropy increase is the dominant driving force. A slight change of the conditions results in structures that are energetically stabilized. This study provides rules for the rational design of 3D nanostructured binary semiconductors, materials with promises in thermoelectrics and photovoltaics and which cannot be reached by any other technology.

Observation of a Ternary Nanocrystal Superlattice and Its Structural Characterization by Electron Tomography

The first genuine ternary colloidal crystal (see picture) is composed of PbSe nanocrystals of two different diameters (blue and green) and of CdSe nanocrystals (red). Electron tomography shows that the superlattice is isostructural with the atomic lattice AlMgB4.

Quantitative structural analysis of binary nanocrystal superlattices by electron tomography

Binary nanocrystal superlattices, that is, ordered structures of two sorts of nanocolloids, hold promise for a series of functional materials with novel collective properties. Here we show that based on electron tomography a comprehensive, quantitative, three-dimensional characterization of these systems down to the single nanocrystal level can be achieved, which is key in understanding the emerging materials properties. On four binary lattices composed of PbSe, CdSe, and Au nanocrystals, we illustrate that ambiguous interpretations based on two-dimensional transmission electron microscopy can be prevented, nanocrystal sizes and superlattice parameters accurately determined, individual crystallographic point and plane defects studied, and the order/disorder at the top and bottom surfaces imaged. Furthermore, our results suggest that superlattice nucleation and growth occurred at the suspension/air interface and that the unit cells of some lattices are anisotropically deformed upon drying.

Epitaxially Connected PbSe Quantum-Dot Films: Controlled Neck Formation and Optoelectronic Properties

Ligand exchange is a much-used method to increase the conductivity of colloidal quantum-dot films by replacing long insulating ligands on quantum-dot surfaces with shorter ones. Here we show that while some ligands indeed replace the original ones as expected, others may be used to controllably remove the native ligands and induce epitaxial necking of specific crystal facets. In particular, we demonstrate that amines strip lead oleate from the (100) surfaces of PbSe quantum dots. This leads to necking of QDs and results in cubic superlattices of epitaxially connected QDs. The number of amine head-groups as well as the carbon chain length of linear diamines is shown to control the extent of necking. DFT calculations show that removal of Pb(oleate)2 from (100) surfaces is exothermic for all amines, but the driving force increases as monoamines < long diamines < short diamines < tetramines. The neck formation and cubic ordering results in a higher optical absorption cross section and higher charge carrier mobilities, thereby showing that the use of the proper multidentate amine molecules is a powerful tool to create supercrystals of epitaxially connected PbSe QDs with controlled electronic coupling.

Semiconductor nanorod self-assembly at the liquid/air interface studied by in situ GISAXS and ex situ TEM.

We study the self-assembly of colloidal CdSe/CdS nanorods (NRs) at the liquid/air interface combining time-resolved in situ grazing-incidence small angle X-ray scattering (GISAXS) and ex situ transmission electron microscopy (TEM). Our study shows that NR superstructure formation occurs at the liquid/air interface. Short NRs self-assemble into micrometers long tracks of NRs lying side by side flat on the surface. In contrast, longer NRs align vertically into ordered superstructures. Systematic variation of the NR length and initial concentration of the NR dispersion allowed us to tune the orientation of the NRs in the final superstructure. With GISAXS, we were able to follow the dynamics of the self-assembly. We propose a model of hierarchical self-organization that provides a basis for the understanding of the length-dependent self-organization of NRs at the liquid/air interface. This opens the way to new materials based on NR membranes and anisotropic thin films.

High charge mobility in two-dimensional percolative networks of PbSe quantum dots connected by atomic bonds

Two-dimensional networks of quantum dots connected by atomic bonds have an electronic structure that is distinct from that of arrays of quantum dots coupled by ligand molecules. We prepared atomically coherent two-dimensional percolative networks of PbSe quantum dots connected via atomic bonds. Here, we show that photoexcitation leads to generation of free charges that eventually decay via trapping. The charge mobility probed with an AC electric field increases with frequency from 150±15 cm2 V−1 s−1 at 0.2 terahertz to 260±15 cm2 V−1 s−1 at 0.6 terahertz. Gated four-probe measurements yield a DC electron mobility of 13±2 cm2 V−1 s−1. The terahertz mobilities are much higher than for arrays of quantum dots coupled via surface ligands and are similar to the highest DC mobilities reported for PbSe nanowires. The terahertz mobility increases only slightly with temperature in the range of 15–290 K. The extent of straight segments in the two-dimensional percolative networks limits the mobility, rather than charge scattering by phonons.

Binary superlattices of PbSe and CdSe nanocrystals.

In this paper we show that self-organization of colloidal PbSe and CdSe semiconductor nanocrystals with a size ratio of 0.57 leads to binary structures with a AB2 or a cuboctahedral AB13 lattice. The type of superlattice formed can be regulated by the relative concentration of both nanocrystals in the suspension.

Electron Tomography Resolves a Novel Crystal Structure in a Binary Nanocrystal Superlattice

The self-assembly of different nanocrystals into a binary superlattice is of interest for both colloidal science and nanomaterials science. New properties may emerge from the interaction between the nanocrystal building blocks that are ordered in close contact in three dimensions. Identification of the superlattice structure including its defects is of key interest in understanding the electrical and optical properties of these systems. Transmission electron microscopy (TEM) has been very instrumental to reach this goal but fails for complex crystal structures and buried defects. Here, we use electron tomography to resolve the three-dimensional crystal structure of a binary superlattice that could not be resolved by TEM only. The structure with a [PbSe]6[CdSe]19 stoichiometry has no analogue in the atomic world. Moreover we will show how tomography can overcome the clouding effects of planar defects on structure identification by TEM.