William A. Braff

Membrane-less hydrogen bromine flow battery.

In order for the widely discussed benefits of flow batteries for electrochemical energy storage to be applied at large scale, the cost of the electrochemical stack must come down substantially. One promising avenue for reducing stack cost is to increase the system power density while maintaining efficiency, enabling smaller stacks. Here we report on a membrane-less hydrogen bromine laminar flow battery as a potential high-power density solution. The membrane-less design enables power densities of 0.795 W cm(-2) at room temperature and atmospheric pressure, with a round-trip voltage efficiency of 92% at 25% of peak power. Theoretical solutions are also presented to guide the design of future laminar flow batteries. The high-power density achieved by the hydrogen bromine laminar flow battery, along with the potential for rechargeable operation, will translate into smaller, inexpensive systems that could revolutionize the fields of large-scale energy storage and portable power systems.

High sensitivity three-dimensional insulator-based dielectrophoresis

Insulator-based dielectrophoresis (iDEP) is a very promising technique for sorting microparticles based on their electrical properties. The need for microfabricated electrode arrays is eliminated by using constrictions in a microchannel to induce large electric field gradients. In this work, micro-milling is used to build devices with three-dimensional features that exhibit very large constriction ratios. These three-dimensional insulator-based dielectrophoresis (3DiDEP) devices allow for trapping microparticles at average electric fields one order of magnitude lower than two-dimensional designs with the same footprint. Low voltage operation minimizes Joule heating effects that have limited previous systems, opening up the possibility for new biological applications of iDEP.

Dielectrophoresis-based discrimination of bacteria at the strain level based on their surface properties

Insulator-based dielectrophoresis can be used to manipulate biological particles, but has thus far found limited practical applications due to low sensitivity. We present linear sweep three-dimensional insulator-based dielectrophoresis as a considerably more sensitive approach for strain-level discrimination bacteria. In this work, linear sweep three-dimensional insulator-based dielectrophoresis was performed on Pseudomonas aeruginosa PA14 along with six isogenic mutants as well as Streptococcus mitis SF100 and PS344. Strain-level discrimination was achieved between these clinically important pathogens with applied electric fields below 10 V/mm. This low voltage, high sensitivity technique has potential applications in clinical diagnostics as well as microbial physiology research.