Winnie Pradel

Spontaneous tooth eruption after alveolar cleft osteoplasty using tissue-engineered bone: a case report

To bridge the cleft in the alveolar bone and to allow for physiologic eruption of the canine teeth, alveolar bone grafting is often necessary in patients with cleft lips and palates. Instead of autogenous bone, biomaterial seeded with autogenous osteogenic cells has found some clinical application. However, so far no real functional proof has been available to demonstrate that this technique also allows further physiologic features such as tooth eruption to occur. This report describes the results of grafting tissue-engineered bone into the alveolar cleft of a 10-year-old boy. Immediate postoperative healing was uneventful. Eight months after grafting, erupting teeth had moved into the newly formed bone. Eighteen months postoperatively at the site where the tissue-engineered graft had been inserted, the canine had erupted spontaneously in its proper place. The data suggest that tissue-engineered bone can lead to the ossification of the alveolar cleft and allow for physiologic spontaneous tooth eruption.

Tissue-engineered bone grafts for osteoplasty in patients with cleft alveolus

Alveolar bone grafting is an integral part of the treatment concept in cleft palate patients. As an alternative to autogenous bone, tissue-engineered grafts have found some clinical application. The aim of the present study has been to compare ossification in the cleft area using tissue-engineered grafts in a case series of patients with ossification after transplantation of autogenous spongious bone as the gold standard in alveoloplasty. Eight children with complete cleft lips and cleft palates were included in the study. In four children (group A), the cleft defect was filled with tissue-engineered bone (autogenous osteoblasts cultured on demineralized bone matrix Osteovit(®)); as control in another 4 children (group B), the alveoloplasty was performed using spongious iliac bone. Preoperative and 6 months postoperative cone-beam computed tomography was performed, and volumes of the remaining cleft defects were calculated using 3D navigation software. Wound healing was uneventful in both groups. Six months postoperatively the mean volume of the cleft was 0.55±0.24cm(3) after grafting of tissue-engineered bone (group A) and 0.59±0.23cm(3) after transplantation of autogenous spongiosa. In group A, 40.9% of the cleft defect was ossified; in the control group (group B), 36.6%. Tissue-engineered bone is a promising alternative in alveolar bone grafting and no disadvantages were observed in comparison to the gold standard.

Microsurgical reconstruction of the head and neck – Current concepts of maxillofacial surgery in Europe

INTRODUCTION Microvascular surgery following tumour resection has become an important field of oral maxillofacial surgery (OMFS). This paper aims to evaluate current microsurgical practice in Europe. METHODS The questionnaire of the DOESAK collaborative group for Microsurgical Reconstruction was translated into English, transformed into an online based survey and distributed to 200 OMFS units with the aid of the European Association for Cranio-Maxillo-Facial Surgery (EACMFS). RESULTS 65 complete and 72 incomplete questionnaires were returned. Hospitals from the United Kingdom, France, Italy, the Netherlands, Spain, Belgium, Greece, Slovenia and Lithuania participated. 71% of contributing centres were university hospitals, 87% out of these perform microvascular tumour surgery at least on a two-weekly base. Overall complication rate was at around five percent. Most frequently used transplants were the radial forearm flap and the fibular flap. The perioperative management varied widely. Success factors for flap survival, however, were uniformly rated, with the surgical skill being the most important factor, followed by the quality of postoperative management. Medication seems to play a less important role. CONCLUSION Within Europe microvascular surgery is a common and safe procedure for maxillofacial reconstructive surgery in the field of OMFS. While there is a major accordance for the surgical procedure itself and the most frequently used flaps, perioperative management shows a wide variety of protocols with low presumed impact on surgical outcome.

Finite element representation of bone substitute remodelling in the jaw bone.

Abstract The finite element (FE) method was originally developed on a physical basis for the computation of structure-mechanical problems. Meanwhile, it has been widely applied to medical issues. This study sought a suitable method to build a FE model for remodelling processes in osseous defects supplemented with bone substitute material. For this purpose, the second right premolars were extracted from four pig mandibles (Sus scrofa domesticus) and the extraction alveoli were provided with synthetic bone substitute material. After 70 days, a segmented osteotomy of this area was performed for specimen collection. Radiographs of the specimens were taken in defined planes before and after fixation and embedded with Technovit 9100. Fixation-related shrinkage was quantified from the radiographs using reference lines. Computer tomographic (CT) and microCT images of the fixed and embedded specimens were obtained. From these data, a FE model was built. The construction of a FE model is sufficient to represent bone remodelling after supply of bone substitute material. The use of microCT data permits building a clearly more precise model.

O-phospho-L-serine: a modulator of bone healing in calcium-phosphate cements.

Abstract Bone substitution materials are seen as an alternative to autogenous bone transplants in the reconstruction of human bone structures. The aim of the present animal study was to evaluate the clinical handling and the conditions of bone healing after the application of a phosphoserine and collagen-I-modified calcium-phosphate cement (Biozement D). The application of phosphoserine is supposed to influence the texture of the extracellular matrix. Standardised bone defects were created in the lower jaw of 10 adult minipigs. These defects were reconstructed with a pasty calcium-phosphate cement mixture. After a healing time of 4 months, the animals were sacrificed. The mandibles of all animals were resected and non-decalcified histological sections of the areas of interest were prepared. The experiment was evaluated by means of qualitative histology and histomorphometry. The hydroxyapatite cement entirely hardened intraoperatively. Modelling and handling of the cement was facile and the margin fit to the host bone was excellent. Histology showed that resorption started in the periphery and proceeded exceptionally fast. The bony substitution, especially in phosphoserine-endowed cements, was very promising. After a healing period of 4 months, phosphoserine cements showed a bone regeneration of nearly two-thirds of the defect sizes. In the applied animal experiment, the newly developed hydroxyapatite collagen-I cement is well suited for bone substitution due to its easy handling, its excellent integration and good resorption characteristics. The addition of phosphoserine is very promising in terms of influencing resorption features and bone regeneration.

Resorbable triangular plate for osteosynthesis of fractures of the condylar neck

We describe a new design of resorbable plate for use in the treatment of fractures of the condylar neck, and report the outcome of initial treatment in two patients.

Mandibular Traction—An Alternative Treatment in Infants With Pierre Robin Sequence

PURPOSE In the Pierre Robin sequence, retrognathia and glossoptosis lead to airway obstruction in infants with or without cleft palate. Mandibular distraction has gained acceptance for the treatment of airway obstruction. However, surgical interventions can result in complications. In our institution, mandibular traction is the standard treatment in cases of severe respiratory distress. PATIENTS AND METHODS A retrospective study was performed of all infants treated for Pierre Robin sequence at our institution from 1979 to 2007. The diagnosis and type of treatment (positioning/palatal plate or mandibular traction) were evaluated. The palatal plate had several knobs at the anterior alveolar ridge to direct the tongue forward. Mandibular traction was applied using weights transmitted onto the mandible by a custom-made plate fixed at the mandible with circumferential wiring. RESULTS Nineteen children required airway treatment because of repeated cyanotic episodes and respiratory adaptation disorders. Of these 19 children, 8 had been diagnosed with pure Pierre Robin sequence and 11 also had other congenital abnormalities. Of the 19 patients, 10 (56%) were treated nonoperatively by lateral or prone positioning and/or wearing a palatal plate to stimulate the tongue. In 8 patients, conservative management was not sufficient, and continuous mandibular traction was performed for 2 to 5 weeks using weights of 50 to 200 g. One patient required a tracheostomy because of tracheomalacia. CONCLUSIONS Surgical therapy using mandibular traction is a minimally invasive alternative to more invasive procedures because no serious complications such as scars or damage to the nerves were encountered.

Efficacy of tissue engineered bone grafts containing mesenchymal stromal cells for cleft alveolar osteoplasty in a rat model

UNLABELLED The development of sufficient tissue engineered bone grafts for alveolar cleft osteoplasty could reduce the necessity of autogenous bone grafts and its donor site morbidity. The aim of the study was to evaluate tissue engineered bone grafts in an artificially created bone defect. Bone grafts were created in vitro colonizing a synthetic hydroxyapatite-tricalciumphosphate scaffold (BONITmatrix(®)) with either undifferentiated mesenchymal stromal cells (group 1) or osteogenic differentiated mesenchymal stromal cells (group 2). Cells were multiplied from bone marrow of donor rats. Unmodified scaffolds (group 3) and the tissue engineered bone grafts were inserted into artificial maxillary defects of 54 Lewis rats. In 18 animals the defects remained unfilled (control). After one, three and six weeks the rats were sacrificed. The defect was evaluated radiologically and histologically with regard to the remaining defect volume and diameter. Statistical analysis followed. The bone grafts led to a specific bone formation at the defect margin. No complete reunion of any defect was observed within the healing time. After six weeks, the remaining defect volume was 6.86 ± 3.21 mm(3) (control), 4.08 ± 1.36 mm(3) (group 1), 5.00 ± 0.84 mm(3) (group 2) 5.50 ± 1.05 mm(3) (group 3). The remaining defect diameter measured 2.63 ± 0.52 mm (control), 2.39 ± 0.23 mm (group 1), 2.53 ± 0.22 mm (group 2) and 2.70 ± 0.66 mm (group 3). In all experimental groups the defect volume and diameter decreased over time, which was significant for group 1 (p = 0.014), group 2 (p = 0.025) and group 3 (p = 0.048). The defect volume and width was significantly reduced for bone grafts containing undifferentiated cells compared to control (p = 0.035) or scaffolds only (p = 0.05). CONCLUSION Tissue engineered bone grafts induce a pronounced bone formation in artificial bone defects compared to unfilled controls or scaffolds only.

Influence of Cyclosporin A on human gingival keratinocytes in vitro

PURPOSE Gingival hyperplasia is a well known side effect of Cyclosporine A therapy. The aetiology of this is not totally understood and there is debate whether it is hyperplasia of the gingival epithelium or of the submucosal connective tissue, or both, and what roles play factors like age and gender of the patients, duration and dosage of the drug. MATERIAL AND METHODS The influence of different Cyclosporine A concentrations (10(-6) g/ml; 5 x 10(-7) g/ml; 10(-9) g/ml) and of no medication (controls) on growth and proliferation of cultured human gingival keratinocytes was investigated after a culture period of 3, 6 and 9 days. Cell proliferation was assessed by counting anti Ki-67 stained nuclei, cell growth by counting total number of nuclei and by the EZ4U-assay. RESULTS There was no significant correlation of the cell proliferation rate and cellular growth with either gender (p > 0.568) or duration of medication (p > 0.876); but Cyclosporine A concentration showed a highly significant influence on cellular growth (p = 0.0001). Inhibition of cell growth was dependent on drug dosage, but a low concentration of 10(-9) g/ml even stimulated cell growth. CONCLUSIONS There is evidence that Cyclosporine A in low concentrations (10(-9) g/ml as applied in long-term therapy) stimulates gingival keratinocyte growth and therefore might be related to hyperplasia of the gingiva. However, high Cyclosporine A concentrations may inhibit cell growths and factors like gender of the patient did not show any influence in-vitro.

PREFABRICATED BONY RADIAL FOREARM FLAP FOR SECONDARY MANDIBLE RECONSTRUCTION AFTER RADIOCHEMOTHERAPY

Primary reconstruction of the mandible is the golden standard of surgical treatment after ablative tumor surgery. Many different microvascular bone grafts are used to reduce wound healing complications at the severely compromised recipient site. The loss of primary grafts due to radiotherapy or osteoradionecrosis can make secondary mandibular reconstruction necessary. To address this problem, we developed the technique of the prefabrication of a radial forearm flap with cancellous bone. The aims were to establish these techniques into the clinical routine and to create a safe and reliable flap with low donor site morbidity.