Woo June Choi

Full-field optical coherence microscopy for identifying live cancer cells by quantitative measurement of refractive index distribution.

The feasibility of identifying cancer cells by measuring the refractive index (RI) distribution across a single live cell with ultrahigh resolution full-field optical coherence microscopy (FF-OCM) is presented. The FF-OCM is utilized to quantify integral RI distributions of unmodified cells without any cell treatments and used as a biophysical indicator for diagnosing cell malignancy. Firstly, the physical thickness distribution of the cell adherent to a culture dish is measured by taking a series of 0.6 µm resolved en-face tomograms. Subsequently, from the en-face image of the bottom surface of the cell or the top surface of the dish, the phase gain image of the cell is extracted. Then, from these two measurements the axially averaged RI map of the cell is extracted. The implemented FF-OCM system had a 0.8 µm axial resolution and the phase measurement sensitivity of the system was around 124 mrad. With the system, RI maps of several living cell lines of normal and cancer cells were constructed and quantitatively analyzed. The experiments showed that cancer cells had higher RI than normal ones. This approach using the FF-OCM has significant potential for cancer diagnosis and dynamic cell analysis as in situ label-free biophysical assay.

Lensed fiber probes designed as an alternative to bulk probes in optical coherence tomography

We demonstrate a compact all-fiber sampling probe for an optical coherence tomography (OCT) system. By forming a focusing lens directly on the tip of an optical fiber, a compact sampling probe could be implemented. To simultaneously achieve a sufficiently long working distance and a good lateral resolution, we employed a large-mode area photonic crystal fiber (PCF) and a coreless silica fiber (CSF) of the same diameters. A working distance of up to 1270 microm, a 3 dB distance range of 2210 microm, and a transverse resolution of 14.2 microm were achieved with the implemented PCF lensed fiber; these values are comparable to those obtainable with a conventional objective lens having an NA of 0.25 (10 x). The performance of the OCT system equipped with the proposed PCF lensed fiber is presented by showing the OCT images of a rat finger as a biological sample and a pearl as an in-depth sample.

Image restoration method based on Hilbert transform for full-field optical coherence tomography

A full-field optical coherence tomography (FF-OCT) system utilizing a simple but novel image restoration method suitable for a high-speed system is demonstrated. An en-face image is retrieved from only two phase-shifted interference fringe images through using the mathematical Hilbert transform. With a thermal light source, a high-resolution FF-OCT system having axial and transverse resolutions of 1 and 2.2 microm, respectively, was implemented. The feasibility of the proposed scheme is confirmed by presenting the obtained en-face images of biological samples such as a piece of garlic and a gold beetle. The proposed method is robust to the error in the amount of the phase shift and does not leave residual fringes. The use of just two interference images and the strong immunity to phase errors provide great advantages in the imaging speed and the system design flexibility of a high-speed high-resolution FF-OCT system.

The Development of Double Clad Fiber and Double Clad Fiber Coupler for Fiber Based Biomedical Imaging Systems

We report the fabrication of double clad fiber (DCF) and DCF coupler, suitable for fiber based imaging systems requiring the dual-channel transmission. Unlike the conventional DCF which uses silica for both cladding layers, the proposed DCF uses a low-index polymer for its outer-cladding layer coated over the conventional silica inner-cladding layer. The DCF is drawn with a conventional SMF preform but a low-index polymer coating is used for both jacket and outercladding of the fiber. To achieve the cladding mode coupling, a DCF coupler is fabricated by simply twisting two pieces of the proposed DCF after removing the polymer-coating at contacting regions. A cladding mode coupling ratio of 30% was achieved with a contact length of 16 cm. The proposed DCF and DCF coupler were employed in a composite optical coherence tomography (OCT) and fluorescence spectroscopy (FS) system, and both OCT images and FS signal from a plant tissue are measured simultaneously.

Counterfeit Detection Using Characterization of Safety Feature on Banknote with Full-field Optical Coherence Tomography

We report an application of full-field optical coherence tomography (FF-OCT) for identifying counterfeit bank notes. The depth-resolved imaging capability of FF-OCT was used for tomographic identification of superficially-identical objects. By retrieving the internal structures of the security feature (cash hologram) of an original banknote, we could demonstrate the feasibility of FF-OCT to identify counterfeit money. The FF-OCT images showed that the hologram consisted of micron scale multi-coated layers including an air gap. Therefore, it is expected that FF-OCT has potential as a new non-invasive tool to discern imitation of currency, and it would find applications in a wide field of counterfeit sciences.

Characterization of wet pad surface in chemical mechanical polishing (CMP) process with full-field optical coherence tomography (FF-OCT)

Chemical mechanical polishing (CMP) is a key process for global planarization of silicon wafers for semiconductors and AlTiC wafers for magnetic heads. Removal rate of wafer material is directly dependent on the surface roughness of a CMP pad, thus the structure of the pad surface has been evaluated with variable techniques. However, under in situ CMP process, the measurements have been severely limited due to the existence of polishing fluids including the slurry on the pad surface. In here, we newly introduce ultra-high resolution full-field optical coherence tomography (FF-OCT) to investigate the surface of wet pads. With FF-OCT, the wet pad surface could be quantitatively characterized in terms of the polishing pad lifetime, and also be three-dimensionally visualized. We found that reasonable polishing span could be evaluated from the surface roughness measurement and the groove depth measurement made by FF-OCT.

Numerical correction of distorted images in full-field optical coherence tomography

We propose a numerical method which can numerically correct the distorted en face images obtained with a full field optical coherence tomography (FF-OCT) system. It is shown that the FF-OCT image of the deep region of a biological sample is easily blurred or degraded because the sample has a refractive index (RI) much higher than its surrounding medium in general. It is analyzed that the focal plane of the imaging system is segregated from the imaging plane of the coherence-gated system due to the RI mismatch. This image-blurring phenomenon is experimentally confirmed by imaging the chrome pattern of a resolution test target through its glass substrate in water. Moreover, we demonstrate that the blurred image can be appreciably corrected by using the numerical correction process based on the Fresnel–Kirchhoff diffraction theory. The proposed correction method is applied to enhance the image of a human hair, which permits the distinct identification of the melanin granules inside the cortex layer of the hair shaft.

High-speed thermoreflectance microscopy using charge-coupled device-based Fourier-domain filtering

We present a Fourier-domain filtering method for charge-coupled device (CCD)-based thermoreflectance microscopy to improve the thermal imaging speed while maintaining high thermal sensitivity. The time-varying reflected light distribution from the surface of bias-modulated microresistor was recorded by a CCD camera in free-run mode and converted to the frequency domain using the fast Fourier transform (FFT) for all pixels of the CCD. After frequency peak filtering followed by inverse FFT, a thermoreflectance image was obtained. The imaging results of the proposed method were quantitatively compared with those of the conventional four-bucket method, showing that the Fourier-domain filtering method can provide thermal imaging 24-42 times faster than the four-bucket method, depending on the required thermal sensitivity.

Qualitative investigation of fresh human scalp hair with full-field optical coherence tomography

We have investigated depth-resolved cellular structures of unmodified fresh human scalp hairs with ultrahigh-resolution full-field optical coherence tomography (FF-OCT). The Linnik-type white light interference microscope has been home-implemented to observe the micro-internal layers of human hairs in their natural environment. In hair shafts, FF-OCT has qualitatively revealed the cellular hair compartments of cuticle and cortex layers involved in keratin filaments and melanin granules. No significant difference between black and white hair shafts was observed except for absence of only the melanin granules in the white hair, reflecting that the density of the melanin granules directly affects the hair color. Anatomical description of plucked hair bulbs was also obtained with the FF-OCT in three-dimensions. We expect this approach will be useful for evaluating cellular alteration of natural hairs on cosmetic assessment or diagnosis of hair diseases.

Thickness and Refractive Index Measurements by Full-Field Optical Coherence Microscopy

We present the noble sensing method that can simultaneously measure the physical thickness and the refractive index of a transparent specimen based on full-field optical coherence microscopy. As a sample, a small drop of epoxy was placed on a flat glass plate and high-resolution depth resolved en-face images were taken. With adopting the reference plane from a cross-sectional image, the physical thickness, and the refractive index distribution could be obtained.