Wouter H. Roos

High-resolution mass spectrometry of viral assemblies: molecular composition and stability of dimorphic hepatitis B virus capsids.

Hepatitis B virus (HBV) is a major human pathogen. In addition to its importance in human health, there is growing interest in adapting HBV and other viruses for drug delivery and other nanotechnological applications. In both contexts, precise biophysical characterization of these large macromolecular particles is fundamental. HBV capsids are unusual in that they exhibit two distinct icosahedral geometries, nominally composed of 90 and 120 dimers with masses of ≈3 and ≈4 MDa, respectively. Here, a mass spectrometric approach was used to determine the masses of both capsids to within 0.1%. It follows that both lattices are complete, consisting of exactly 180 and 240 subunits. Nanoindentation experiments by atomic-force microscopy indicate that both capsids have similar stabilities. The data yielded a Youngs modulus of ≈0.4 GPa. This experimental approach, anchored on very precise and accurate mass measurements, appears to hold considerable potential for elucidating the assembly of viruses and other macromolecular particles.

Viral capsids: Mechanical characteristics, genome packaging and delivery mechanisms

Abstract.The main functions of viral capsids are to protect, transport and deliver their genome. The mechanical properties of capsids are supposed to be adapted to these tasks. Bacteriophage capsids also need to withstand the high pressures the DNA is exerting onto it as a result of the DNA packaging and its consequent confinement within the capsid. It is proposed that this pressure helps driving the genome into the host, but other mechanisms also seem to play an important role in ejection. DNA packaging and ejection strategies are obviously dependent on the mechanical properties of the capsid. This review focuses on the mechanical properties of viral capsids in general and the elucidation of the biophysical aspects of genome packaging mechanisms and genome delivery processes of double-stranded DNA bacteriophages in particular.

Scaffold expulsion and genome packaging trigger stabilization of herpes simplex virus capsids

Herpes simplex virus type 1 (HSV1) capsids undergo extensive structural changes during maturation and DNA packaging. As a result, they become more stable and competent for nuclear egress. To further elucidate this stabilization process, we used biochemical and nanoindentation approaches to analyze the structural and mechanical properties of scaffold-containing (B), empty (A), and DNA-containing (C) nuclear capsids. Atomic force microscopy experiments revealed that A and C capsids were mechanically indistinguishable, indicating that the presence of DNA does not account for changes in mechanical properties during capsid maturation. Despite having the same rigidity, the scaffold-containing B capsids broke at significantly lower forces than A and C capsids. An extraction of pentons with guanidine hydrochloride (GuHCl) increased the flexibility of all capsids. Surprisingly, the breaking forces of the modified A and C capsids dropped to similar values as those of the GuHCl-treated B capsids, indicating that mechanical reinforcement occurs at the vertices. Nonetheless, it also showed that HSV1 capsids possess a remarkable structural integrity that was preserved after removal of pentons. We suggest that HSV1 capsids are stabilized after removal of the scaffold proteins, and that this stabilization is triggered by the packaging of DNA, but independent of the actual presence of DNA.

Norwalk Virus Assembly and Stability Monitored by Mass Spectrometry

Viral capsid assembly, in which viral proteins self-assemble into complexes of well defined architecture, is a fascinating biological process. Although viral structure and assembly processes have been the subject of many excellent structural biology studies in the past, questions still remain regarding the intricate mechanisms that underlie viral structure, stability, and assembly. Here we used native mass spectrometry-based techniques to study the structure, stability, and assembly of Norwalk virus-like particles. Although detailed structural information on the fully assembled capsid exists, less information is available on potential capsid (dis)assembly intermediates, largely because of the inherent heterogeneity and complexity of the disassembly pathways. We used native mass spectrometry and atomic force microscopy to investigate the (dis)assembly of the Norwalk virus-like particles as a function of solution pH, ionic strength, and VP1 protein concentration. Native MS analysis at physiological pH revealed the presence of the complete capsid (T = 3) consisting of 180 copies of VP1. The mass of these capsid particles extends over 10 million Da, ranking them among the largest protein complexes ever analyzed by native MS. Although very stable under acidic conditions, the capsid was found to be sensitive to alkaline treatment. At elevated pH, intermediate structures consisting of 2, 4, 6, 18, 40, 60, and 80 copies of VP1 were observed with the VP160 (3.36-MDa) and VP180 (4.48-MDa) species being most abundant. Atomic force microscopy imaging and ion mobility mass spectrometry confirmed the formation of these latter midsize spherical particles at elevated pH. All these VP1 oligomers could be reversely assembled into the original capsid (VP1180). From the MS data collected over a range of experimental conditions, we suggest a disassembly model in which the T = 3 VP1180 particles dissociate into smaller oligomers, predominantly dimers, upon alkaline treatment prior to reassembly into VP160 and VP180 species.

Probing the biophysical interplay between a viral genome and its capsid

The interaction between a viral capsid and its genome governs crucial steps in the life cycle of a virus, such as assembly and genome uncoating. Tuning cargo-capsid interactions is also essential for successful design and cargo delivery in engineered viral systems. Here we investigate the interplay between cargo and capsid for the picorna-like Triatoma virus using a combined native mass spectrometry and atomic force microscopy approach. We propose a topology and assembly model in which heterotrimeric pentons that consist of five copies of structural proteins VP1, VP2 and VP3 are the free principal units of assembly. The interpenton contacts are established primarily by VP2. The dual role of the genome is first to stabilize the densely packed virion and, second, on an increase in pH to trigger uncoating by relaxing the stabilizing interactions with the capsid. Uncoating occurs through a labile intermediate state of the virion that reversibly disassembles into pentons with the concomitant release of protein VP4.

Squeezing Protein Shells: How Continuum Elastic Models, Molecular Dynamics Simulations, and Experiments Coalesce at the Nanoscale

The current rapid growth in the use of nanosized particles is fueled in part by our increased understanding of their physical properties and ability to manipulate them, which is essential for achieving optimal functionality. Here we report detailed quantitative measurements of the mechanical response of nanosized protein shells (viral capsids) to large-scale physical deformations and compare them with theoretical descriptions from continuum elastic modeling and molecular dynamics (MD). Specifically, we used nanoindentation by atomic force microscopy to investigate the complex elastic behavior of Hepatitis B virus capsids. These capsids are hollow, approximately 30 nm in diameter, and conform to icosahedral (5-3-2) symmetry. First we show that their indentation behavior, which is symmetry-axis-dependent, cannot be reproduced by a simple model based on Föppl-von Kármán thin-shell elasticity with the fivefold vertices acting as prestressed disclinations. However, we can properly describe the measured nonlinear elastic and orientation-dependent force response with a three-dimensional, topographically detailed, finite-element model. Next, we show that coarse-grained MD simulations also yield good agreement with our nanoindentation measurements, even without any fitting of force-field parameters in the MD model. This study demonstrates that the material properties of viral nanoparticles can be correctly described by both modeling approaches. At the same time, we show that even for large deformations, it suffices to approximate the mechanical behavior of nanosized viral shells with a continuum approach, and ignore specific molecular interactions. This experimental validation of continuum elastic theory provides an example of a situation in which rules of macroscopic physics can apply to nanoscale molecular assemblies.

Mechanics of bacteriophage maturation

Capsid maturation with large-scale subunit reorganization occurs in virtually all viruses that use a motor to package nucleic acid into preformed particles. A variety of ensemble studies indicate that the particles gain greater stability during this process, however, it is unknown which material properties of the fragile procapsids change. Using Atomic Force Microscopy-based nano-indentation, we study the development of the mechanical properties during maturation of bacteriophage HK97, a λ-like phage of which the maturation-induced morphological changes are well described. We show that mechanical stabilization and strengthening occurs in three independent ways: (i) an increase of the Young’s modulus, (ii) a strong rise of the capsid’s ultimate strength, and (iii) a growth of the resistance against material fatigue. The Young’s modulus of immature and mature capsids, as determined from thin shell theory, fit with the values calculated using a new multiscale simulation approach. This multiscale calculation shows that the increase in Young’s modulus isn’t dependent on the crosslinking between capsomers. In contrast, the ultimate strength of the capsids does increase even when a limited number of cross-links are formed while full crosslinking appears to protect the shell against material fatigue. Compared to phage λ, the covalent crosslinking at the icosahedral and quasi threefold axes of HK97 yields a mechanically more robust particle than the addition of the gpD protein during maturation of phage λ. These results corroborate the expected increase in capsid stability and strength during maturation, however in an unexpected intricate way, underlining the complex structure of these self-assembling nanocontainers.

Elucidating the Mechanism behind Irreversible Deformation of Viral Capsids

Atomic force microscopy has recently provided highly precise measurements of mechanical properties of various viruses. However, molecular details underlying viral mechanics remain unresolved. Here we report atomic force microscopy nanoindentation experiments on T=4 hepatitis B virus (HBV) capsids combined with coarse-grained molecular dynamics simulations, which permit interpretation of experimental results at the molecular level. The force response of the indented capsid recorded in simulations agrees with experimental observations. In both experiment and simulation, irreversible capsid deformation is observed for deep indentations. Simulations show the irreversibility to be due to local bending and shifting of capsid proteins, rather than their global rearrangement. These results emphasize the viability of large capsid deformations without significant changes of the mutual positions of HBV capsid proteins, in contrast to the stiffer capsids of other viruses, which exhibit more extensive contacts between their capsid proteins than seen in the case of HBV.

Ultraviolet-emitting ZnO nanowhiskers prepared by a vapor transport process on prestructured surfaces with self-assembled polymers

ZnO wires were grown by a vapor–liquid–solid phase transport process. Self-assembled Au nano-clusters act as a catalyst or seed for the highly oriented growth of so-called ZnO whiskers on sapphire substrates by a vapor–liquid–solid phase transport process. The ZnO nanowires were more than 500 nm high and smaller than 30 nm in diameter. Low-temperature photoluminescence measurements reveal intense and detailed ultraviolet light emission near the opitical band gap of ZnO at 3.37 eV. The ZnO nanowires show almost no broad green photoluminescence emission band related to oxygen defects and only a weak signal due to donor–acceptor pair recombination. X-ray diffraction proves that the ZnO wires were grown c-plane oriented on an a-plane sapphire substrate with high crystal quality most likely because of a kind of self-purification during the growth process.

The role of the cytoskeleton in sensing changes in gravity by nonspecialized cells

A large body of evidence indicates that single cells in vitro respond to changes in gravity, and that this response might play an important role for physiological changes at the organism level during spaceflight. Gravity can lead to changes in cell proliferation, differentiation, signaling, and gene expression. At first glance, gravitational forces seem too small to affect bodies with the size of a cell. Thus, the initial response to gravity is both puzzling and important for understanding physiological changes in space. This also offers a unique environment to study the mechanical response of cells. In the past 2 decades, important steps have been made in the field of mechanobiology, and we use these advances to reevaluate the response of single cells to changes in gravity. Recent studies have focused on the cytoskeleton as initial gravity sensor. Thus, we review the observed changes in the cytoskeleton in a microgravity environment, both during spaceflight and in ground‐based simulation techniques. We also evaluate to what degree the current experimental evidence supports the cytoskeleton as primary gravity sensor. Finally, we consider how the cytoskeleton itself could be affected by changed gravity. To make the next step toward understanding the response of cells to altered gravity, the challenge will be to track changes quantitatively and on short timescales.—Vorselen, D., Roos, W. H., MacKintosh, F. C., Wuite, G. J. L., van Loon, J. J. W. A. The role of the cytoskeleton in sensing changes in gravity by nonspecialized cells. FASEB J. 28, 536–547 (2014). www.fasebj.org