Xiabin Jing

Electrospinning of polymeric nanofibers for drug delivery applications.

Electrospinning has been recognized as a simple and versatile method for fabrication of polymer nanofibers. Various polymers that include synthetic, natural, and hybrid materials have been successfully electrospun into ultrafine fibers. The inherently high surface to volume ratio of electrospun fibers can enhance cell attachment, drug loading, and mass transfer properties. Drugs ranging from antibiotics and anticancer agents to proteins, DNA, RNA, living cells, and various growth factors have been incorporated into electrospun fibers. This article presents an overview of electrospinning techniques and their application in drug delivery.

On–Off–On Fluorescent Carbon Dot Nanosensor for Recognition of Chromium(VI) and Ascorbic Acid Based on the Inner Filter Effect

Chromium(VI) [Cr(VI)] is considered as a severe environmental pollutant, due to its highly toxic and carcinogenic properties. Therefore, low cost, highly sensitive sensors for the determination of Cr(VI) are highly demanded. It is well-known that highly luminescent carbon dots (CDs) have been successfully applied as fluorescent nanosensors for pH, ions, and molecular substances. In the present work, we have demonstrated an on-off fluorescent CD probe for detecting Cr(VI) based on the inner filter effect (IFE) because the absorption bands of Cr(IV) fully covered the emission and excitation bands of CDs. This CD-based nanosensor provides obvious advantages of simplicity, convenience, rapid response, high selectivity, and sensitivity, which have potential application for the detection of Cr(VI) in the environmental industry. In addition, because Cr(VI) can be reduced to low valent chromium species easily by reductant, resulting in the elimination of the IFE and recovery of CD fluorescence, the CD-Cr(VI) mixture could behave as an off-on type fluorescent probe for reductant. We employed ascorbic acid (AA) as an example molecule to demonstrate this off-on type fluorescent probe.

Formation mechanism and optimization of highly luminescent N-doped graphene quantum dots

Photoluminescent graphene quantum dots (GQDs) have received enormous attention because of their unique chemical, electronic and optical properties. Here a series of GQDs were synthesized under hydrothermal processes in order to investigate the formation process and optical properties of N-doped GQDs. Citric acid (CA) was used as a carbon precursor and self-assembled into sheet structure in a basic condition and formed N-free GQD graphite framework through intermolecular dehydrolysis reaction. N-doped GQDs were prepared using a series of N-containing bases such as urea. Detailed structural and property studies demonstrated the formation mechanism of N-doped GQDs for tunable optical emissions. Hydrothermal conditions promote formation of amide between –NH2 and –COOH with the presence of amine in the reaction. The intramoleculur dehydrolysis between neighbour amide and COOH groups led to formation of pyrrolic N in the graphene framework. Further, the pyrrolic N transformed to graphite N under hydrothermal conditions. N-doping results in a great improvement of PL quantum yield (QY) of GQDs. By optimized reaction conditions, the highest PL QY (94%) of N-doped GQDs was obtained using CA as a carbon source and ethylene diamine as a N source. The obtained N-doped GQDs exhibit an excitation-independent blue emission with single exponential lifetime decay.

In vivo mineralization and osteogenesis of nanocomposite scaffold of poly (lactide-co-glycolide) and hydroxyapatite surface-grafted with poly(L-lactide)

Nanocomposite of hydroxyapatite (HAP) surface-grafted with poly(l-lactide) (PLLA) (g-HAP) shows a wide application for bone fixation materials due to its improved interface compatibility, mechanical property and biocompatibility in our previous study. In this paper, a 3-D porous scaffold of g-HAP/poly(lactide-co-glycolide) (PLGA) was fabricated using the solvent casting/particulate leaching method to investigate its applications in bone replacement and tissue engineering. The composite of un-grafted HAP/PLGA and neat PLGA were used as controls. Their in vivo mineralization and osteogenesis were investigated by intramuscular implantation and replacement for repairing radius defects of rabbits. After surface modification, more uniform distribution of g-HAP particles but a lower calcium exposure on the surface of g-HAP/PLGA was observed. Intramuscular implantation study showed that the scaffold of g-HAP/PLGA was more stable than that of PLGA, and exhibited similar mineralization and biodegradability to HAP/PLGA at the 12-20 weeks post-surgery. The implantation study for repairing critical radius defects showed that the scaffold of g-HAP/PLGA exhibited rapid and strong mineralization and osteoconductivity, and the incorporation of BMP-2 could enhance the osteogenic process of the composite implant. The new bone formation with the intact structure of a long bone was guided by the implant of g-HAP/PLGA.

Synthesis of biodegradable and electroactive multiblock polylactide and aniline pentamer copolymer for tissue engineering applications.

To obtain one biodegradable and electroactive polymer as the scaffold for tissue engineering, the multiblock copolymer PLAAP was designed and synthesized with the condensation polymerization of hydroxyl-capped poly( l-lactide) (PLA) and carboxyl-capped aniline pentamer (AP). The PLAAP copolymer exhibited excellent electroactivity, solubility, and biodegradability. At the same time, as one scaffold material, PLAAP copolymer possesses certain mechanical properties with the tensile strength of 3 MPa, tensile Young s modulus of 32 MPa, and breaking elongation rate of 95%. We systematically studied the compatibility of PLAAP copolymer in vitro and proved that the electroactive PLAAP copolymer was innocuous, biocompatible, and helpful for the adhesion and proliferation of rat C6 cells. Moreover, the PLAAP copolymer stimulated by electrical signals was demonstrated as accelerating the differentiation of rat neuronal pheochromocytoma PC-12 cells. This biodegradable and electroactive PLAAP copolymer thus possessed the properties in favor of the long-time application in vivo as nerve repair scaffold materials in tissue engineering.

Pyrazine-Containing Acene-Type Molecular Ribbons with up to 16 Rectilinearly Arranged Fused Aromatic Rings

A series of acene-type conjugated molecules (1-5) containing 2-6 pyrazine units and up to 16 rectilinearly arranged fused aromatic rings were synthesized by condensation coupling of 1,2-diamines and 1,2-diketones. The energy gap of the molecules estimated from absorption edge decreases with an increase in molecular length, indicating the well-delocalized nature of the molecules. The cyclic voltammetry measurements suggest that the n-type properties of these ribbonlike pyrazine derivatives are dependent on the molecular length and the number of the pyrazine units. As the number of pyrazine units and the molecular length increase, the first reduction wave onset is shifted from -1.16 to -0.62 V (vs Ag/AgCl), corresponding to the LUMO energy levels of -3.24 and -3.78 eV, respectively. These molecules tend to aggregate in solution more readily with an increase in molecular length, as evident by (1)H NMR and UV-vis absorption spectra. Introduction of t-butyl groups in pyrene units can noticeably suppress the aggregation of these molecules in solution. High electron affinity, high environmental stability, and ease of structural modification make these compounds excellent candidates as a new class of n-type semiconductors.

Biodegradable polymer - cisplatin(IV) conjugate as a pro-drug of cisplatin(II)

A Pt(IV) complex was covalently conjugated to a new biodegradable amphiphilic tri-block copolymer, MPEG-b-PCL-b-PLL, which contains pendant amino groups, to form a polymeric pro-drug of cisplatin(II), MPEG-b-PCL-b-PLL/Pt(IV). The conjugate was assembled into nano-micelles. The Pt(IV) complex, the polymer carrier and the conjugate were characterized systematically. In vitro release experiments showed that drug release from the polymer-Pt(IV) micelles follows an acid responsive and oxidation-reduction sensitive kinetics. HPLC-ICP-MS analysis revealed that cisplatin(II) can be released from the conjugate under an acidic plus a reductive condition which is available inside a cancerous cell. In vitro MTT assay demonstrated that the polymer-Pt(IV) micelles display higher cytotoxicity against SKOV-3 tumor cells than both cisplatin(II) and Pt(IV) complex. This enhanced cytotoxicity is attributed to effective internalization of the micelles by the cells via endocytosis mechanism, which was observed by fluorescence imaging and by direct determination of the platinum uptake by the cells. This polymer-Pt(IV) conjugate is a promising polymeric pro-drug of cisplatin in micellar form. It can protect the Pt(IV) complex against blood clearance. It can enter cancerous cells via endocytosis mechanism and then cisplatin(II) can be released. Therefore, this polymeric pro-drug of cisplatin is expected to find clinical applications in the future.

A prodrug strategy to deliver cisplatin(IV) and paclitaxel in nanomicelles to improve efficacy and tolerance

A strategy of preparing composite micelles containing both cisplatin(IV) prodrug and paclitaxel was developed, i.e., synthesizing a cisplatin(IV) conjugate and a paclitaxel conjugate starting with the same biodegradable and amphiphilic block copolymer, and co-assembling the two conjugates. The composite micelles could release effective anticancer drug cisplatin(II) upon cellular reduction and PTX via acid hydrolysis once they came into the cancerous cells. Moreover, the composite micelles displayed synergistic effect in vitro and the combination therapy in micellar dosage-form led to reduced systematic toxicity and enhanced antitumor efficacy in vivo.

Self-host blue-emitting iridium dendrimer with carbazole dendrons: nondoped phosphorescent organic light-emitting diodes.

A blue-emitting iridium dendrimer, namely B-G2, has been successfully designed and synthesized with a secondgeneration oligocarbazole as the dendron, which is covalently attached to the emissive tris[2-(2,4-difluorophenyl)-pyridyl]iridium(III) core through a nonconjugated link to form an efficient self-host system in one dendrimer. Unlike small molecular phosphors and other phosphorescent dendrimers, B-G2 shows a continuous enhancement in the device efficiency with increasing doping concentration. When using neat B-G2 as the emitting layer, the nondoped device is achieved without loss in efficiency, thus giving a state-of-art EQE as high as 15.3% (31.3 cdA1, 28.9 lmW1) along with CIE coordinates of (0.16, 0.29).

Solution-Processable Carbazole-Based Conjugated Dendritic Hosts for Power-Efficient Blue-Electrophosphorescent Devices

A novel class of hosts suitable for solution processing has been developed based on a conjugated dendritic scaffold. By increasing the dendron generation, the highest occupied molecular orbital (HOMO) energy level can be tuned to facilitate hole injection, while the triplet energy remains at a high level, sufficient to host high-energy-triplet emitters. A power-efficient blue-electrophosphorescent device based on H2 is presented.