Xiao-Kun Zhao

Phase transition and high piezoelectricity in (Ba,Ca)(Ti1−xSnx)O3 lead-free ceramics

The phase structure in the (Ba,Ca)(Ti1−xSnx)O3 lead-free ceramics was evolved from inceptive orthorhombic (O) at 0 ≤ x ≤ 0.04 to a two-phase coexistence of pseudocubic-orthorhombic (PC-O) at 0.06 ≤ x ≤ 0.10 and further to a multiphase coexistence of rhombohedral-pseudocubic-orthorhombic (R-PC-O) at x = 0.11. Due to the multiphase coexistence of R-PC-O at room temperature proved by X-ray diffraction, dielectric constant er and differential scanning calorimetry, an ultrahigh piezoelectric coefficient d33 = 670 pC/N and electrostrain 0.061% were achieved. The high d33 over 520 pC/N was stabilized in a wide compositional range of 0.07 ≤ x ≤ 0.11, suggesting that (Ba,Ca)(Ti,Sn)O3 ceramics are a promising candidate for the lead-free piezoelectric ceramics.

High piezoelectricity due to multiphase coexistence in low-temperature sintered (Ba,Ca)(Ti,Sn)O3–CuOx ceramics

Ultrahigh piezoelectric constant (d33 = 683 pC/N) and converse piezoelectric coefficient (dS/dE = 1257 pm/V) were observed in CuO-doped lead-free (Ba,Ca)(Ti,Sn)O3 ceramics at an optimal composition fabricated by a conventional sintering method at a low temperature 1250 °C. Since all samples showed a pure perovskite structure with coexisting multiphases including cubic, tetragonal, orthorhombic, and rhombohedral phases around two converged triple points, a good compositional stability of high piezoelectricity along with a high d33 and dS/dE over 600 pC/N and 1000 pm/V was achieved within a wide compositional region (1.0 ≤ x ≤ 3.0) regardless of the CuO content (x).

Modified phase transition and electrical properties of [Li0.05(Na0.535K0.48)0.95]-(Nb0.94Sb0.06)O3 lead-free piezoelectric ceramic by sintering temperature

Li/Sb-doped (Na,K)NbO3 with a nominal composition of [Li0.05(Na0.535K0.48)0.95](Nb0.94Sb0.06)O3 ceramic was synthesized by normal sintering. The phase structure, microstructure, and electrical properties were investigated with a special emphasis on the influence of the sintering temperature. A polymorphic phase transition (PPT) from orthorhombic to tetragonal symmetry was observed when the sintering temperature was raised from 1040 to 1050 °C, whereby the piezoelectric coefficient d33 and the electromechanical coupling coefficient kp reached the peak values of 245 pC·N−1 and 41.2%, respectively. The PPT induced by varying the sintering temperature is due to the different volatilization extents of alkali metals and appears to a lower sintering temperature with increasing Li content. The trace modifying of alkali metal content is more effective than doping B site element to enhance the d33 value.