Xiaoxi Cai

Competitive removal of Cd(II) and Pb(II) by biochars produced from water hyacinths: performance and mechanism

Three biochars converted from water hyacinth biomass at 300, 450, and 600 °C were used to investigate the adsorption properties of Cd2+ and Pb2+. In addition, the competitive adsorption mechanisms between Cd2+ and Pb2+ were also conducted. Adsorption kinetics and isotherms indicated that the maximum adsorption capacity of Pb2+ was larger than that of Cd2+, and the adsorption process in the mixed solutions of two heavy metals (Cd2+ and Pb2+) was more favorable for Pb2+. Further investigation about the characterization of biochars demonstrated that cation exchange, surface complexation, cation–π interaction and precipitation were the main mechanisms responsible for the heavy metal removal. In this study, competitive adsorption may also be explained by these mechanisms. These results are useful for the application of biochars in selective adsorption and in practical wastewater treatment.

Tetracycline absorbed onto nitrilotriacetic acid-functionalized magnetic graphene oxide: Influencing factors and uptake mechanism

A novel magnetic nanomaterial was synthesized by grafting nitrilotriacetic acid to magnetic graphene oxide (NDMGO), which was applied as an adsorbent for removing tetracycline (TC) from aqueous solutions. The nanomaterial was characterized using TG-DTA, SEM, TEM, XRD, VSM, XPS, Raman, BET surface area and zeta potential measurements. Several experimental conditions (solution pH, adsorption time, temperature, ionic strength and foreign ions) affecting the adsorption process were investigated. The results showed that the TC adsorption capacity could be affected by solution pH. The adsorption capacity of TC increased rapidly in the initial 20min and finally reached equilibrium was about 600min. The pseudo-second-order kinetics provided the better correlation for the experiment data. Various thermodynamic parameters indicated that the adsorption was a spontaneous and endothermic process. The presence of NaCl and background electrolytes in the solution had a slight influence on TC adsorption. Hydrogen bonds, amidation reaction, π-π and cation-π interaction between NDMGO and TC could be used to explain the adsorption mechanism. The regeneration experiment demonstrated that this nanomaterial possessed an excellent regeneration performance. Based on the experimental results and comparative analysis with other adsorbents, the NDMGO was a high-efficiency and reusable adsorbent for TC pollution control.

Facile synthesis of Cu(II) impregnated biochar with enhanced adsorption activity for the removal of doxycycline hydrochloride from water

In this study, the effect factors and mechanisms of doxycycline hydrochloride (DOX) adsorption on copper nitrate modified biochar (Cu-BC) was investigated. Cu-BC absorbent was synthesized through calcination of peanut shells biomass at 450°C and then impregnation with copper nitrate. The Cu-BC has exhibited excellent sorption efficiency about 93.22% of doxycycline hydrochloride from aqueous solution, which was double higher than that of the unmodified biochar. The experimental results suggest that the adsorption efficiency of DOX on the Cu-BC is dominated by the strong complexation, electrostatic interactions between DOX molecules and the Cu-BC samples. Comprehensively considering the cost, efficiency and the application to realistic water, the Cu-BC hold the significant potential for enhancing the effectiveness to remove DOX from water.

One-pot synthesis of carbon supported calcined-Mg/Al layered double hydroxides for antibiotic removal by slow pyrolysis of biomass waste.

A biochar supported calcined-Mg/Al layered double hydroxides composite (CLDHs/BC) was synthesized by a one-pot slow pyrolysis of LDHs preloaded bagasse biomass. Multiple characterizations of the product illustrated that the calcined-Mg/Al layered double hydroxides (CLDHs) were successfully coated onto the biochar in slow pyrolysis of pre-treated biomass. The as-synthesized CLDHs/BC could efficiently remove antibiotic tetracycline from aqueous solutions. The coating of CLDHs significantly increased the adsorption ability of biochar, and CLDHs/BC exhibited more than 2 times higher adsorption capacity than that of the pristine biochar (BC) in the tested pH range. The maximum adsorption capacity of CLDHs/BC for tetracycline was 1118.12 mg/g at 318 K. The experimental results suggested that the interaction with LDHs on biochar played a dominant role in tetracycline adsorption, accompanied with π–π interaction and hydrogen bond. This study provides a feasible and simple approach for the preparation of high-performance material for antibiotics contaminated wastewater treatment in a cost-effective way.

Biochar pyrolyzed from MgAl-layered double hydroxides pre-coated ramie biomass (Boehmeria nivea (L.) Gaud.): Characterization and application for crystal violet removal

A novel biochar/MgAl-layered double hydroxides composite (CB-LDH) was prepared for the removal of crystal violet from aqueous solution by pyrolyzing MgAl-LDH pre-coated ramie stem (Boehmeria nivea (L.) Gaud.). Pyrolysis played dual role for both converting biomass into biochar and calcining MgAl-LDH during the pyrolysis process. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray analysis (EDS), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FTIR) and zeta potential analysis were used to characterize the CB-LDH. The results of characterization suggested that the calcined LDH was successfully synthesized and coated on biochar. The resulted CB-LDH had higher total pore volume and more functional groups than the pristine biochar. Adsorption experimental data fitted well with the pseudo-second order kinetics model and the Freundlich isotherm model. The rate-controlled step was controlled by film-diffusion initially and then followed by intra-particle diffusion. Thermodynamic analysis showed that the adsorption of crystal violet was a spontaneous and endothermic process. The higher pH and temperature of the solution enhanced the adsorption performance. CB-LDH could also have excellent ability for the removal of crystal violet from the actual industrial wastewater and groundwater with high ionic strength. LDH adsorption, electrostatic attraction, pore-filling, π-π interaction and hydrogen bond might be the main mechanisms for crystal violet adsorption on CB-LDH. The results of this study indicated that CB-LDH is a sustainable and green adsorbent with high performance for crystal violet contaminated wastewater treatment and groundwater remediation.

Growth inhibition and oxidative damage of Microcystis aeruginosa induced by crude extract of Sagittaria trifolia tubers

Aquatic macrophytes are considered to be promising in controlling harmful cyanobacterial blooms. In this research, an aqueous extract of Sagittaria trifolia tubers was prepared to study its inhibitory effect on Microcystis aeruginosa in the laboratory. Several physiological indices of M. aeruginosa, in response to the environmental stress, were analyzed. Results showed that S. trifolia tuber aqueous extract significantly inhibited the growth of M. aeruginosa in a concentration-dependent way. The highest inhibition rate reached 90% after 6 day treatment. The Chlorophyll-a concentration of M. aeruginosa cells decreased from 343.1 to 314.2μg/L in the treatment group. The activities of superoxide dismutase and peroxidase and the content of reduced glutathione in M. aeruginosa cells initially increased as a response to the oxidative stress posed by S. trifolia tuber aqueous extract, but then decreased as time prolonged. The lipid peroxidation damage of the cyanobacterial cell membranes was reflected by the malondialdehyde level, which was notably higher in the treatment group compared with the controls. It was concluded that the oxidative damage of M. aeruginosa induced by S. trifolia tuber aqueous extract might be one of the mechanisms for the inhibitory effects.