XingYi Li

Synthesis and characterization of PEG-PCL-PEG thermosensitive hydrogel

In this work, a series of biodegradable triblock poly(ethylene glycol)-poly(epsilon-caprolactone)-poly(ethylene glycol) (PEG-PCL-PEG, PECE) copolymers were successfully synthesized by ring-opening copolymerization, and were characterized by (1)H NMR, FT-IR, GPC, and DSC. Aqueous solutions of PECE copolymers underwent thermosensitive sol-gel-sol transition as temperature increases when the concentration was above corresponding critical gel concentration (CGC). Sol-gel-sol phase transition diagrams were recorded using test tube inverting method, which depended on hydrophilic/hydrophobic balance in macromolecular structure, as well as some other factors, including topology of triblock copolymers and solution composition of the hydrogel. As a result, the sol-gel-sol transition temperature range could be varied, which might be very useful for its application as injectable drug delivery systems. The in vivo gel formation and degradation behavior was conducted by injecting aqueous PECE solution into KunMing mice subcutaneously. In vitro degradation behavior, in vitro drug release behavior, and cytotoxicity were also investigated in this paper. Therefore, owing to great thermosensitivity and biodegradability of these copolymers, PECE hydrogel is believed to be promising for in situ gel-forming controlled drug delivery system.

Preparation of alginate coated chitosan microparticles for vaccine delivery

BackgroundAbsorption of antigens onto chitosan microparticles via electrostatic interaction is a common and relatively mild process suitable for mucosal vaccine. In order to increase the stability of antigens and prevent an immediate desorption of antigens from chitosan carriers in gastrointestinal tract, coating onto BSA loaded chitosan microparticles with sodium alginate was performed by layer-by-layer technology to meet the requirement of mucosal vaccine.ResultsThe prepared alginate coated BSA loaded chitosan microparticles had loading efficiency (LE) of 60% and loading capacity (LC) of 6% with mean diameter of about 1 μm. When the weight ratio of alginate/chitosan microparticles was greater than 2, the stable system could be obtained. The rapid charge inversion of BSA loaded chitosan microparticles (from +27 mv to -27.8 mv) was observed during the coating procedure which indicated the presence of alginate layer on the chitosan microparticles surfaces. According to the results obtained by scanning electron microscopy (SEM), the core-shell structure of BSA loaded chitosan microparticles was observed. Meanwhile, in vitro release study indicated that the initial burst release of BSA from alginate coated chitosan microparticles was lower than that observed from uncoated chitosan microparticles (40% in 8 h vs. about 84% in 0.5 h). SDS-polyacrylamide gel electrophoresis (SDS-PAGE) assay showed that alginate coating onto chitosan microparticles could effectively protect the BSA from degradation or hydrolysis in acidic condition for at least 2 h. The structural integrity of alginate modified chitosan microparticles incubated in PBS for 24 h was investigated by FTIR.ConclusionThe prepared alginate coated chitosan microparticles, with mean diameter of about 1 μm, was suitable for oral mucosal vaccine. Moreover, alginate coating onto the surface of chitosan microparticles could modulate the release behavior of BSA from alginate coated chitosan microparticles and could effectively protect model protein (BSA) from degradation in acidic medium in vitro for at least 2 h. In all, the prepared alginate coated chitosan microparticles might be an effective vehicle for oral administration of antigens.

A novel injectable local hydrophobic drug delivery system: Biodegradable nanoparticles in thermo-sensitive hydrogel.

In this article, a novel local hydrophobic drug delivery system: nanoparticles in thermo-sensitive hydrogel, was demonstrated. First, honokiol, as a model hydrophobic drug, loaded poly(epsilon-caprolactone)-poly(ethylene glycol)-poly(epsilon-caprolactone) (PCEC) nanoparticles were prepared by emulsion solvent evaporation method, and then were incorporated into thermo-sensitive F127 hydrous matrix. The obtained injectable hydrophobic drug delivery system can act as a depot for sustained release of honokiol in situ. The lower critical solution temperature (LCST) of the composite matrix increases with increase in the mass of incorporated nanoparticles, or with decrease in the amount of residual organic solvent in the system. Honokiol release profile in vitro was studied, and the results showed that honokiol could be sustained released from the system. The described injectable drug delivery system might have great potential application for local delivery of hydrophobic drugs such as honokiol.

Chitosan-alginate sponge: preparation and application in curcumin delivery for dermal wound healing in rat.

A biodegradable sponge, composed of chitosan (CS) and sodium alginate (SA), was successfully obtained in this work. The sponge was ethereal and pliable. The chemical structure and morphology of the sponges was characterized by FTIR and SEM. The swelling ability, in vitro drug release and degradation behaviors, and an in vivo animal test were employed to confirm the applicability of this sponge as a wound dressing material. As the chitosan content in the sponge decreased, the swelling ability decreased. All types of the sponges exhibited biodegradable properties. The release of curcumin from the sponges could be controlled by the crosslinking degree. Curcumin could be released from the sponges in an extended period for up to 20 days. An in vivo animal test using SD rat showed that sponge had better effect than cotton gauze, and adding curcumin into the sponge enhanced the therapeutic healing effect.

A thermosensitive hydrogel based on biodegradable amphiphilic poly(ethylene glycol)–polycaprolactone–poly(ethylene glycol) block copolymers

A series of low molecular weight poly(ethylene glycol)–polycaprolactone–poly(ethylene glycol) (PEG–PCL–PEG) biodegradable block copolymers were successfully synthesized using isophorone diisocyanate (IPDI) as the coupling agent, and were characterized using 1H NMR and Fourier transform infrared spectroscopy. The aqueous solutions of the PEG–PCL–PEG copolymers displayed a special thermosensitive gel–sol transition when the concentration was above the corresponding critical gel concentration. Gel–sol phase diagrams were recorded using the test-tube-inversion method; they depended on the hydrophilic/hydrophobic balance in the macromolecular structure, as well as some other factors, including the heating history, volume, and the ageing time of the copolymer aqueous solutions and dissolution temperature of the copolymers. As a result, the gel–sol transition temperature range could be altered, which might be very useful for application in injectable drug delivery systems.

PHARMACEUTICAL NANOTECHNOLOGY: A Novel Composite Hydrogel Based on Chitosan and Inorganic Phosphate for Local Drug Delivery of Camptothecin Nanocolloids

In attempt to overcome the problem of low water solubility and severe toxicity of camptothecin (CPT) after intravenous administration, a novel drug carrier system based on chitosan (CS) and dibasic sodium phosphate (DSP) has been developed in this paper to encapsulate CPT intending for local administration. Nanocolloids of CPT with size about 500  nm were first prepared, followed by encapsulation in the chitosan/dibasic sodium phosphate (CS/DSP) formulation. The formulation was sol state below 37°C and transformed to nonflowing gel state at 37°C. Encapsulation of CPT nanocolloids had greatly effect on the gelling time as well as the micro-structure of hydrogel. In vitro and in vivo degradation studies revealed that the developed CS/DSP hydrogel was biodegradable and biocompatible. In vitro release study revealed that CPT released from CS/DSP hydrogel in an extended period with about 70% of total CPT released from hydrogel after 18 days. Furthermore, nearly 90% of CPT in the chitosan hydrogels could be preserved in the lactone form (active form) even after 7 dayss storage at 37°C. Furthermore, in vitro cytotoxicity of CPT nanocolloids on SKOV3 human ovarian cancer cells suggested the well anti-tumor cell efficiency could be gained at a lower concentration.

Preparation of mannan modified anionic PCL–PEG–PCL nanoparticles at one-step for bFGF antigen delivery to improve humoral immunity ☆

In this article, blank anionic poly(epsilon-caprolactone)-poly(ethylene glycol)-poly(epsilon-caprolactone) (PCEC) and anionic mannan modified PCEC (MPCEC) nanoparticles with nearly the same particle size and zeta potential were prepared by emulsion solvent evaporation method. Human basic fibroblast growth factor (bFGF) was absorbed onto anionic nanoparticles surface due to electrostatic interaction. The obtained bFGF-nanoparticles complexes were injected subcutaneously into C57BL/6 mice at 20 microg of bFGF/dose on week 0, 1, 2 and 3. The mice serum was collected on week 4, and bFGF-specific autoantibody total IgG, IgG1 and IgG2a titer in serum was determined by ELISA. The results indicated that the autoantibody IgG, IgG1 and IgG2a titer of the mice immunized by bFGF-MPCEC complexes were higher than that immunized by either bFGF-PCEC or bFGF-Alum. This phenomenon might be due to that mannan functionalized MPCEC nanoparticles could be targeted to dendritic cells (DCs) to improve humoral immunity. The prepared anionic mannan modified PCEC nanoparticles (MPCEC) might have great potential application in vaccine delivery systems.

Gel–sol–gel thermo-gelation behavior study of chitosan–inorganic phosphate solutions

In present study, the feasibility of developing a novel thermo-sensitive hydrogel suitable for injectable formulations based on chitosan and inorganic phosphate was demonstrated. The physicochemical and rheological changes of chitosan/dibasic sodium phosphate solutions as in function with temperature were investigated in order to gain a better understanding of gelation process. According to the result of rheological study, there are two phase transition points as in function with temperature, corresponding to 30 degrees C and 43 degrees C. The system is gel state at approximately 4 degrees C. With the temperature increased to 30 degrees C, the gel-sol transition as well as the decrease in turbidity was observed. The sol-gel transition as well as the increase in turbidity was observed again as the temperature was above 43 degrees C. And the gel obtained at approximately 4 degrees C is reversible, but the gel obtained at approximately 43 degrees C is irreversible.

Anti-tumor activity of N-trimethyl chitosan-encapsulated camptothecin in a mouse melanoma model

BackgroundCamptothecin (CPT) has recently attracted increasing attention as a promising anticancer agent for a variety of tumors. But the clinical application is largely hampered by its extreme water insolubility and unpredictable side effect. It is essential to establish an efficient and safe protocol for the administration of CPT versus melanoma.MethodsCamptothecin was encapsulated with N-trimethyl chitosan (CPT-TMC) through microprecipitation and sonication. Its inhibition effect on B16-F10 cell proliferation and induction of apoptosis was evaluated by MTT assay and flow cytometric analysis in vitro. The anti-tumor activity of CPT-TMC was evaluated in C57BL/6 mice bearing B16-F10 melanoma. Tumor volume, tumor weight and survival time were recorded. Assessment of apoptotic cells within tumor tissue was performed by TUNEL assay. Antiangiogenesis and antiproliferation effects of CPT-TMC in vivo were conducted via CD31 and PCNA immunohistochemistry, respectively.ResultsCPT-TMC efficiently inhibited B16-F10 cells proliferation and increased apoptosis in vitro. Experiment group showed significant inhibition compared with free CPT-treated group (81.3% vs. 56.9%) in the growth of B16-F10 melanoma xenografts and prolonged the survival time of the treated mice (P < 0.05). Decreased cell proliferation, increased tumor apoptosis as well as a reduction in angiogenesis were observed.ConclusionsOur data suggest that N-trimethyl chitosan-encapsulated camptothecin is superior to free CPT by overcoming its insolubility and finally raises the potential of its application in melanoma therapy.

Preparation, characterization, and in vitro cytotoxicity study of cationic PCL-Pluronic-PCL (PCFC) nanoparticles for gene delivery

In this article, poly(epsilon-caprolactone)-pluronic-poly(epsilon-caprolactone) (PCFC) copolymer was synthesized by ring-opening polymerization and characterized by 1H-NMR and GPC. Cationic PCFC nanoparticles were prepared at one-step by modified emulsion solvent evaporation method using cetyltrimethylammonium bromide as the stabilizer. The cytotoxicity of PCFC nanoparticles was studied here with and without serum. The obtained cationic PCFC nanoparticles were employed to condense and adsorb DNA onto its surface. And it could protect plasmid GFP (pGFP) from enzymatic degradation and acidic degradation in a certain period. Release behavior of pGFP from the pGFP/PCFC nanoparticles complex was also studied in vitro. The obtained cationic PCEC nanoparticles might have great potential application in DNA delivery.