Xingyi Li

In situ injectable nano-composite hydrogel composed of curcumin, N,O-carboxymethyl chitosan and oxidized alginate for wound healing application

In this paper, an in situ injectable nano-composite hydrogel composed of curcumin, N,O-carboxymethyl chitosan and oxidized alginate as a novel wound dressing was successfully developed for the dermal wound repair application. Nano-curcumin with improved stability and similar antioxidant efficiency compared with that of unmodified curcumin was developed by using methoxy poly(ethylene glycol)-b-poly(ε-caprolactone) copolymer (MPEG-PCL) as carrier followed by incorporating into the N,O-carboxymethyl chitosan/oxidized alginate hydrogel (CCS-OA hydrogel). In vitro release study revealed that the encapsulated nano-curcumin was slowly released from CCS-OA hydrogel with the diffusion-controllable manner at initial phase followed by the corrosion manner of hydrogel at terminal phase. In vivo wound healing study was performed by injecting hydrogels on rat dorsal wounds. Histological study revealed that application of nano-curcumin/CCS-OA hydrogel could significantly enhance the re-epithelialization of epidermis and collagen deposition in the wound tissue. DNA, protein and hydroxyproline content in wound tissue from each group were measured on 7th day of post wounding and the results also indicated that combined using nano-curcumin and CCS-OA hydrogel could significantly accelerate the process of wound healing. Therefore, all these results suggested that the developed nano-curcumin/CCS-OA hydrogel as a promising wound dressing might have potential application in the wound healing.

Diclofenac/biodegradable polymer micelles for ocular applications

In this paper, methoxypoly(ethylene glycol)-poly(ε-caprolactone) (MPEG-PCL) micelle formulations as promising nano-carriers for poorly water soluble drugs were investigated for the delivery of diclofenac to the eye. Diclofenac loaded MPEG-PCL micelles were prepared by a simple solvent-diffusion method and characterized by dynamic light scattering (DLS), atomic force microscopy (AFM), Fourier transform infra-red (FTIR), X-ray diffraction (XRD), differential scanning calorimetery (DSC), etc. With the analysis of XRD and DSC, the diclofenac was present as an amorphous state in the formulation. The in vitro release profile indicated a sustained release manner of diclofenac from the micelles. Meanwhile, in vivo studies on eye irritation were performed with blank MPEG-PCL micelles (200 mg ml(-1)). The results showed that the developed MPEG-PCL micelles were non-irritants to the eyes of rabbits. In vitro penetration studies across the rabbit cornea demonstrated that the micelle formulations exhibited a 17-fold increase in penetration compared with that of diclofenac phosphate buffered saline (PBS) solution. The in vivo pharmacokinetics profile of the micelle parent drug in the aqueous humor of the rabbit was evaluated and the data showed that the diclofenac loaded MPEG-PCL micelles exhibited a 2-fold increase in AUC(0-24 h) than that of the diclofenac PBS solution eye drops. These results suggest a great potential of our micelle formulations as a novel ocular drug delivery system to improve the bioavailability of the drugs.

Cytotoxicity and biocompatibility evaluation of N,O-carboxymethyl chitosan/oxidized alginate hydrogel for drug delivery application

In this paper, covalently cross-linked hydrogel composed of N,O-carboxymethyl chitosan and oxidized alginate was developed intending for drug delivery application. In vitro/vivo cytocompatibility and biocompatibility of the developed hydrogel were preliminary evaluated. In vitro cytocompatibility test showed that the developed hydrogel exhibited good cytocompatibility against NH3T3 cells after 3-day incubation. According to the results of acute toxicity test, there was no obvious cytotoxicity for major organs during the period of 21-day intraperitoneal administration. Meanwhile, the developed hydrogel did not induce any cutaneous reaction within 72 h of subcutaneous injection followed by slow degradation and adsorption with the time evolution. Moreover, the extraction of developed hydrogel had nearly 0% of hemolysis ratio, which indicated the good hemocompatibility of hydrogel. Based on the above results, it may be concluded that the developed N,O-carboxymethyl chitosan/oxidized alginate hydrogel with non-cytotoxicity and good biocompatibility might suitable for the various drug delivery applications.

Preparation and characterization of nano-hydroxyapatite/chitosan cross-linking composite membrane intended for tissue engineering

In this paper, a series of nano-hydroxyapatite(n-HA)/chitosan cross-linking composite membranes (n-HA; 0, 5, 10, 15, 20 and 30 wt%) were successfully developed by a simple casting/solvent evaporation method. n-HA with size about 20 nm in vertical diameter and about 100 nm in horizontal diameter was successfully synthesized by a hydro-thermal precipitation method, and then dispersed into chitosan/genipin solution with the aid of continuous ultrasound to develop n-HA/chitosan cross-linking composite membranes. The detailed characterizations including Fourier transform infrared spectroscopy (FTIR), X-ray diffractometer (XRD), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), water adsorption and tensile test were performed. With the analysis of FTIR spectra and TGA spectra, it suggested that there was existence of possible interactions between polymer and n-HA. Meanwhile, the n-HA content was greatly effected on the morphology as well as the tensile property of composite membrane. In vitro cytotoxicity test suggested that the developed n-HA/chitosan cross-linking composite membrane was non-cytotoxicity against L929 cells after 24hs incubation might be suitable for further in vivo application.

Development and evaluation of fast forming nano-composite hydrogel for ocular delivery of diclofenac

In this paper, a fast forming nano-composite hydrogel was developed for potential application in ocular drug delivery. The optical transmission (OT) as well as rheological properties of nano-composite hydrogel was characterized. The developed nano-composite hydrogel given a high diclofenac micelles loading and provided a sustained release manner of diclofenac within 6h. The developed nano-composite hydrogel formulation was administrated into the eye as flowable solution, quickly forming a hydrogel that is able to resist of the blinking and flushing of tear, yet resulting in the prolonged residence time of pre-corneal. In vivo eye irritation test suggested that the developed nano-composite hydrogel was none-eye irritation might be suitable for various ocular applications. In vivo pharmacokinetic study indicated that the developed nano-composite hydrogel could significantly increase the bioavailability of diclofenac and maintain the concentration of diclofenac in aqueous humor above MEC at least 24h after administration as compared with that of the commercial diclofenac sodium eye drops, which might be able to reduce the frequency of administration for patients.

In situ covalently cross-linked PEG hydrogel for ocular drug delivery applications

Avastin(®) has been clinically proved to be effective in the treatment of intraocular neovascularization diseases. However, the short half-life of Avastin(®) need frequent administration to maintain its therapeutic efficiency. In this paper, we attempted to develop an in situ PEG hydrogels with great biocompatibility for sustained release of Avastin(®) to inhibit the corneal neovascularization. PEG hydrogels was formed via thiol-maleimide reaction using 4-arm PEG-Mal and 4-arm PEG-SH. The transparent hydrogel was rapidly formed under physiological conditions. By varying the concentration of 4-arm PEG-SH, PEG hydrogel with different gelling time, pore size, swelling ratio and mechanical property could be obtained. In vitro cytotoxicity indicated that the developed PEG hydrogel had no apparent cytotoxicity on L-929 cells after 7 days of incubation. In vitro release study showed the encapsulated Avastin(®) was sustained release from PEG hydrogels within a period of 14 days study. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) analysis further confirmed that the released Avastin(®) did not undergo apparent hydrolysis within 14 days. As a conclusion, we could conclude that the developed PEG hydrogels as an injectable hydrogels might be suitable for extended Avastin(®) release to treat the corneal neovascularization.

A Powerful CD8+ T‐Cell Stimulating D‐Tetra‐Peptide Hydrogel as a Very Promising Vaccine Adjuvant

A novel vaccine adjuvant based on a supramolecular hydrogel of a D-tetra-peptide is reported. Antigens can be easily incorporated into the hydrogel by a vortex or by gently shaking before injection. The vaccines can stimulate strong CD8+ T-cell responses, which significantly inhibits tumor growth. This novel adjuvant is expected to enable a wide range of sub-unit vaccines and help the production of antibodies.

Fabrication of a Micellar Supramolecular Hydrogel for Ocular Drug Delivery

In this paper, we describe a simple method for constructing a micellar supramolecular hydrogel, composed of a low-molecular-weight methoxy poly(ethylene glycol) (Mn = 2000 Da) block polymer and α-cyclodextrin (α-CD), for topical ocular drug delivery. Adding aqueous block polymer micelles into an α-CD aqueous solution resulted in the formation of a micellar supramolecular hydrogel through host-guest inclusion. The effects of the drug payload, block polymer, and α-CD concentrations as well as the block polymer structure on gelation time were investigated. The resultant micellar supramolecular hydrogels were thoroughly characterized by X-ray diffraction, rheological studies, and scanning electron microscopy. The hydrogels exhibited thixotropic properties, which are beneficial to ocular drug delivery. In vitro release studies indicated that the α-CD concentration strongly influenced the release rate of diclofenac (DIC) from supramolecular hydrogel. The hydrogels showed relatively low cytotoxicity toward L-929 and HCEC cells and did not significantly affect the migration of the latter after 24 h incubation. The hydrogel was nonirritant toward the rabbit eye, as indicated by the Draize test, fluorescein staining, and histological observation. Nile Red-labeled micellar supramolecular hydrogel showed that it could significantly extend the retention time on the corneal surface in rabbits, compared with a plain micellar formulation. In vivo pharmacokinetics indicated that the hydrogel could greatly improve ocular drug bioavailability, compared with that of micellar formulation. Our results suggest that the micellar supramolecular hydrogel is a promising system for ocular drug delivery.

Chitosan grafted methoxy poly(ethylene glycol)-poly(ε-caprolactone) nanosuspension for ocular delivery of hydrophobic diclofenac

This study aimed to develop a cationic nanosuspension of chitosan (CS) and methoxy poly(ethylene glycol)-poly(ε-caprolactone) (MPEG-PCL) for ocular delivery of diclofenac (DIC). MPEG-PCL-CS block polymer was synthesized by covalent coupling of MPEG-PCL with CS. The critical micelle concentration of the MPEG-PCL-CS block polymer was 0.000692 g/L. DIC/MPEG-PCL-CS nanosuspension (mean particle size = 105 nm, zeta potential = 8 mV) was prepared and characterized by Fourier transform infrared spectroscopy, X-ray diffraction, and differential scanning calorimetry. The nanosuspension was very stable without apparent physical property changes after storage at 4 °C or 25 °C for 20 days, but it was unstable in the aqueous humor solution after 24 h incubation. Sustained release of the encapsulated DIC from the nanosuspension occurred over 8 h. Neither a blank MPEG-PCL-CS nanosuspension nor a 0.1% (mass fraction) DIC/MPEG-PCL-CS nanosuspension caused ocular irritation after 24 h of instillation. Enhanced penetration and retention in corneal tissue was achieved with a Nile red/MPEG-PCL-CS nanosuspension compared with a Nile red aqueous solution. In vivo pharmacokinetics studies showed enhanced pre-corneal retention and penetration of the DIC/MPEG-PCL-CS nanosuspension, which resulted in a higher concentration of DIC (Cmax) in the aqueous humor and better bioavailability compared with commercial DIC eye drops (P < 0.01).

Hydrogels of halogenated Fmoc-short peptides for potential application in tissue engineering

Molecular hydrogels formed by Fmoc-short peptides have been demonstrated to be a class of promising scaffolds/carrier for in vitro cell cultures/drug delivery. In this paper, we firstly studied the gelation property of Fmoc-halogenated phenylalanine and found that the halogenated compounds had better gelation properties than the Fmoc-phenylalanine in aqueous solutions. The most efficient gelator is Fmoc-4-fluoro-phenylalanine, which can gel PBS buffer solution at the minimum gelation concentration of 0.15 wt%. All of the hydrogels formed by halogenated or non-halogenated Fmoc-phenylalanine were characterized by SEM and fluorescence spectrometer. But unfortunately, they were not suitable for NIH 3T3 cell culture. Based on these information and the fact that arginine-glycine-aspartic acid (RGD) peptide could promote cells adhesion and division, we then synthesized a Fmoc-peptide (Fmoc-fFfFGRGD) based on the best gelator of 4-fluoro-phenylalanine (fF) and the cell adhesion peptide of RGD. We observed the formation of molecular hydrogels from Fmoc-fFfFGRGD and the hydrogels could promote NIH 3T3 cell adhesion and proliferation efficiently. This study provides useful information about the gelation property of peptides containing halogenated phenylalanine and the hydrogels reported in this paper had potentials to be used as materials for tissue engineering and drug delivery.