Xinpei Lu

Room-temperature atmospheric pressure plasma plume for biomedical applications

As low-temperature nonequilibrium plasmas come to play an increasing role in biomedical applications, reliable and user-friendly sources need to be developed. These plasma sources have to meet stringent requirements such as low temperature (at or near room temperature), no risk of arcing, operation at atmospheric pressure, preferably hand-held operation, low concentration of ozone generation, etc. In this letter, we present a device that meets exactly such requirements. This device is capable of generating a cold plasma plume several centimeters in length. It exhibits low power requirements as shown by its current-voltage characteristics. Using helium as a carrier gas, very little ozone is generated and the gas temperature, as measured by emission spectroscopy, remains at room temperature even after hours of operations. The plasma plume can be touched by bare hands and can be directed manually by a user to come in contact with delicate objects and materials including skin and dental gum without causing any heating or painful sensation.

Dynamics of an atmospheric pressure plasma plume generated by submicrosecond voltage pulses

Nonequilibrium plasmas driven by submicrosecond high voltage pulses have been proven to produce high-energy electrons, which in turn lead to enhanced ionization and excitations. Here, we describe a device capable of launching a cold plasma plume in the surrounding air. This device, “the plasma pencil,” is driven by few hundred nanosecond wide pulses at repetition rates of a few kilohertz. Correlation between current-voltage characteristics and fast photography shows that the plasma plume is in fact a small bulletlike volume of plasma traveling at unusually high velocities. A model based on photoionization is used to explain the propagation kinetics of the plasma bullet under low electric field conditions.

On atmospheric-pressure non-equilibrium plasma jets and plasma bullets

Atmospheric-pressure non-equilibrium plasma jets (APNP-Js), which generate plasma in open space rather than in a confined discharge gap, have recently been a topic of great interest. In this paper, the development of APNP-Js will be reviewed. Firstly, the APNP-Js are grouped based on the type of gas used to ignite them and their characteristics are discussed in detail. Secondly, one of the most interesting phenomena of APNP-Js, the ?plasma bullet?, is discussed and its behavior described. Thirdly, the very recent developments on the behavior of plasma jets when launched in a controlled environment and pressure are also introduced. This is followed by a discussion on the interaction between plasma jets. Finally, perspectives on APNP-J research are presented.

A single electrode room-temperature plasma jet device for biomedical applications

A single electrode room-temperature atmospheric pressure plasma plume generated between a high-voltage electrode and the surrounding room air is reported. The plasma plume has a peak current of about 360mA. This is highest current carried by a room-temperature plasma plume ever reported. The rotational and vibrational temperature of the plasma plume is about 300 and 2950K, respectively. Emission spectra show that excited species, such as O, OH, N2+, etc., are present in the plasma plume.

The roles of the various plasma agents in the inactivation of bacteria

The roles of various plasma agents in the inactivation of bacteria have recently been investigated. However, up to now, the effect of the charged particles on the inactivation of bacteria is not well understood. In this paper, an atmospheric pressure plasma jet device, which generates a cold plasma plume carrying a peak current of 300 mA, is used to investigate the role of the charged particles in the inactivation process. It is found that the charged particles play a minor role in the inactivation process when He/N2(3%) is used as working gas. On the other hand, when He/O2(3%) is used, the charged particles are expected to play an important role in the inactivation of bacteria. Further analysis shows that the negative ions O2− might be the charged particles that are playing the role. Besides, it is found that the active species, including O, O3, and metastable state O2∗, can play a crucial role in the inactivation of the bacteria. However, the excited He∗, N2 C Π3u, and N2+ B Σ2u+ have no significant direct effect on the inactivation of bacteria. It is also concluded that heat and UV play no or minor role in the inactivation process.The roles of various plasma agents in the inactivation of bacteria have recently been investigated. However, up to now, the effect of the charged particles on the inactivation of bacteria is not well understood. In this paper, an atmospheric pressure plasma jet device, which generates a cold plasma plume carrying a peak current of 300 mA, is used to investigate the role of the charged particles in the inactivation process. It is found that the charged particles play a minor role in the inactivation process when He/N2(3%) is used as working gas. On the other hand, when He/O2(3%) is used, the charged particles are expected to play an important role in the inactivation of bacteria. Further analysis shows that the negative ions O2− might be the charged particles that are playing the role. Besides, it is found that the active species, including O, O3, and metastable state O2∗, can play a crucial role in the inactivation of the bacteria. However, the excited He∗, N2 C Π3u, and N2+ B Σ2u+ have no significant dir...

An 11 cm long atmospheric pressure cold plasma plume for applications of plasma medicine

In this letter, a room temperature atmospheric pressure plasma jet device is reported. The high voltage electrode of the device is covered by a quartz tube with one end closed. The device, which is driven by a kilohertz ac power supply, is capable of generating a plasma plume up to 11cm long in the surrounding room air. The rotational and vibrational temperatures of the plasma plume are 300 and 2300K, respectively. A simple electrical model shows that, when the plasma plume is contacted with a human, the voltage drop on the human is less than 66V for applied voltage of 5kV (rms).

An

The application of cold plasma in sterilization of a root canal of a tooth has recently attracted great attention. In this paper, a reliable and user-friendly plasma-jet device, which can generate plasma inside the root canal, is reported. The plasma can be touched by bare hands and can be directed manually by a user to place it into root canal for disinfection without causing any painful sensation. When He/O2(20%) is used as working gas, the rotational and vibrational temperatures of the plasma are about 300 K and 2700 K, respectively. The peak discharge current is about 10 mA. Preliminary inactivation experiment results show that it can efficiently kill enterococcus faecalis , one of the main types of bacterium causing failure of root-canal treatment in several minutes.

RC

Nonequilibrium, atmospheric pressure discharges are rapidly becoming an important technological component in material processing applications. Amongst their attractive features is the ability to achieve enhanced gas phase chemistry without the need for elevated gas temperatures. To further enhance the plasma chemistry, pulsed operation with pulse widths in the nanoseconds range has been suggested. We report on a specially designed, dielectric barrier discharge based diffuse pulsed discharge and its electrical characteristics. Two current pulses corresponding to two consecutive discharges are generated per voltage pulse. The second discharge, which occurs at the falling edge of the voltage pulse, is induced by the charges stored on the electrode dielectric during the initial discharge. Therefore, the power supplied to ignite the first discharge is partly stored to later ignite a second discharge when the applied voltage decays. This process ultimately leads to a much improved power transfer to the plasma.

Plasma Device for Sterilization of Root Canal of Teeth

Effective biofilm inactivation using a handheld, mobile plasma jet powered by a 12 V dc battery and operated in open air without any external gas supply is reported. This cold, room-temperature plasma is produced in self-repetitive nanosecond discharges with current pulses of ~100 ns duration, current peak amplitude of ~6 mA and repetition rate of ~20 kHz. It is shown that the reactive plasma species penetrate to the bottom layer of a 25.5 µm-thick Enterococcus faecalis biofilm and produce a strong bactericidal effect. This is the thickest reported biofilm inactivated using room-temperature air plasmas.

Power consideration in the pulsed dielectric barrier discharge at atmospheric pressure

Rather than using noble gas, room air is used as the working gas for an atmospheric pressure room-temperature plasma. The plasma is driven by submicrosecond pulsed directed current voltages. Several current spikes appear periodically for each voltage pulse. The first current spike has a peak value of more than 1.5 A with a pulse width of about 10 ns. Emission spectra show that besides excited OH, O, N2(C–B), and N2+(B–X) emission, excited NO, N2(B–A), H, and even N emission are also observed in the plasma, which indicates that the plasma may be more reactive than that generated by other plasma jet devices. Utilizing the room-temperature plasma, preliminary inactivation experiments show that Enterococcus faecalis can be killed with a treatment time of only several seconds.