Xiuming Jiang

Ionic liquid-based dispersive liquid-liquid microextraction followed high-performance liquid chromatography for the determination of organophosphorus pesticides in water sample.

Using 1-octyl-3-methylimidazolium hexafluorophosphate ([C(8)MIM][PF(6)]) ionic liquid as extraction solvent, organophosphorus pesticides (OPPs) (parathion, phoxim, phorate and chlorpyifos) in water were determined by dispersive liquid-liquid microextraction (DLLME) combined with high-performance liquid chromatography (HPLC). The extraction procedure was induced by the formation of cloudy solution, which was composed of fine drops of [C(8)MIM][PF(6)] dispersed entirely into sample solution with the help of disperser solvent (methanol). Parameters including extraction solvent and its volume, disperser solvent and its volume, extraction time, centrifugal time, salt addition, extraction temperature and sample pH were investigated and optimized. Under the optimized conditions, up to 200-fold enrichment factor of analytes and acceptable extraction recovery (>70%) were obtained. The calibration curves were linear in the concentration range of 10.5-1045.0 microg L(-1) for parathion, 10.2-1020.0 microg L(-1) for phoxim, 54.5-1089.0 microg L(-1) for phorate and 27.2-1089.0 microg L(-1) for chlorpyifos, respectively. The limits of detection calculated at a signal-to-noise ratio of 3 were in the range of 0.1-5.0 microg L(-1). The relative standard deviations for seven replicate experiments at 200 microg L(-1) concentration level were less than 4.7%. The proposed method was applied to the analysis of four different sources water samples (tap, well, rain and Yellow River water) and the relative recoveries of spiked water samples are 99.9-115.4%, 101.8-113.7% and 87.3-117.6% at three different concentration levels of 75, 200 and 1000 microg L(-1), respectively.

A new 1,3-dibutylimidazolium hexafluorophosphate ionic liquid-based dispersive liquid-liquid microextraction to determine organophosphorus pesticides in water and fruit samples by high-performance liquid chromatography.

The paper described a new ionic liquid, 1,3-dibutylimidazolium hexafluorophosphate, as extraction solvent for extraction and preconcentration of organophosphorus pesticides (fenitrothion, parathion, fenthion and phoxim) from water and fruit samples by dispersive liquid-liquid microextraction combined with high-performance liquid chromatography. The effects of experimental parameters, such as extraction solvent volume, disperser solvent and its volume, extraction and centrifugal time, sample pH, extraction temperature and salt addition, on the extraction efficiency were investigated. An extraction recovery of over 75% and enrichment factor of over 300-fold were obtained under the optimum conditions. The linearity relationship was also observed in the range of 5-1000 microgL(-1) with the correlation coefficients (r(2)) ranging from 0.9988 to 0.9999. Limits of detection were 0.01-0.05 microgL(-1) for four analytes. The relative standard deviations at spiking three different concentration levels of 20, 100 and 500 microgL(-1) varied from 1.3-2.7, 1.4-1.9 and 1.1-1.7% (n=7), respectively. Three real samples including tap water, Yellow River water and pear spiked at three concentration levels were analyzed and yielded recoveries ranging from 92.7-109.1, 95.0-108.2 and 91.2-108.1%, respectively.

Poly(ionic liquid) immobilized magnetic nanoparticles as new adsorbent for extraction and enrichment of organophosphorus pesticides from tea drinks

New poly(ionic liquid) immobilized magnetic nanoparticles (PIL-MNPs) were synthesized via co-polymerization of 1-vinyl-3-hexylimidazolium-based ionic liquid and vinyl-modified magnetic particles and were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, transmission electron microscopy, and magnetic measurements. The PIL-MNPs were utilized as adsorbent phases in magnetic solid-phase extraction (MSPE). The extraction and enrichment efficiency were evaluated by using four organophosphorus pesticides (parathion, fenthion, phoxim and temephos) as test analytes. Various parameters, such as amount of adsorbent, adsorption time, desorption solvent and time, and ionic strength were investigated. The proposed method showed good linearity for the analytes in the concentration range of 1-200μgL(-1) with a correlation coefficient (R)>0.9963. Low limit of detection of 0.01μgL(-1) and high enrichment factors ranging from 84 to 161 were achieved. The proposed method has been successfully used to determine organophosphorus pesticides from three tea drink samples with satisfactory recovery of 81.4-112.6% and RSDs of 4.5-11.3%. The PIL-MNP adsorbent can be reused for 20 times without a noticeable decrease in extraction efficiency.

Macrocyclic polyamine‐functionalized silica as a solid‐phase extraction material coupled with ionic liquid dispersive liquid–liquid extraction for the enrichment of polycyclic aromatic hydrocarbons

In this study, silica modified with a 30-membered macrocyclic polyamine was synthesized and first used as an adsorbent material in SPE. The SPE was further combined with ionic liquid (IL) dispersive liquid-liquid microextraction (DLLME). Five polycyclic aromatic hydrocarbons were employed as model analytes to evaluate the extraction procedure and were determined by HPLC combined with UV/Vis detection. Acetone was used as the elution solvent in SPE as well as the dispersive solvent in DLLME. The enrichment of analytes was achieved using the 1,3-dibutylimidazolium bis[(trifluoromethyl)sulfonyl]imide IL/acetone/water system. Experimental conditions for the overall macrocycle-SPE-IL-DLLME method, such as the amount of adsorbent, sample solution volume, sample solution pH, type of elution solvent as well as addition of salt, were studied and optimized. The developed method could be successfully applied to the analysis of four real water samples. The macrocyclic polyamine offered higher extraction efficiency for analytes compared with commercially available C18 cartridge, and the developed method provided higher enrichment factors (2768-5409) for model analytes compared with the single DLLME. Good linearity with the correlation coefficients ranging from 0.9983 to 0.9999 and LODs as low as 0.002 μg/L were obtained in the proposed method.

A new 14-membered tetraazamacrocycle-bonded silica stationary phase for reversed-phase high-performance liquid chromatography.

A new high-performance liquid chromatography stationary phase has been prepared by covalently bonding 14-membered tetraazamacrocycle to silica gel using γ-chloropropyltrimethoxylsilane as coupling agent. The structure of the new material was characterized by infrared spectroscopy and elemental analysis. With 32 solutes including aromatic and aliphatic compounds, the linear solvation energy relationship method was successfully used to chromatographically evaluate the new phase in reversed phase mode. The retention property of the new phase shows evident similarity with that of ODS stationary phase, as well as distinctive, unique retention characteristics. The separations of n-alkylbenzene, carbamate and organophosphorus pesticides with diversified functional groups as well as phenolic compounds demonstrate that in addition to hydrophobic interaction, dipole-dipole interaction and hydrogen bonding interaction plus acid-base equilibrium could also be simultaneously offered by this new stationary phase, as a result excellent chromatographic performances are guaranteed.

Dicationic polymeric ionic-liquid-based magnetic material as an adsorbent for the magnetic solid-phase extraction of organophosphate pesticides and polycyclic aromatic hydrocarbons

Magnetic particles modified with a dicationic polymeric ionic liquid are described as a new adsorbent in magnetic solid-phase extraction. They were obtained through the copolymerization of a 1,8-di(3-vinylimidazolium)octane-based ionic liquid with vinyl-modified SiO2 @Fe3 O4 , and were characterized by FTIR spectroscopy, X-ray diffraction, and vibrating sample magnetometry. The modified magnetic particles are effective in the extraction of organophosphate pesticides and polycyclic aromatic hydrocarbons. Also, they can provide different extraction performance for the selected analytes including fenitrothion, parathion, fenthion, phoxim, phenanthrene, and fluoranthene, where the extraction efficiency is found to be in agreement with the hydrophobicity of analytes. Various factors influencing the extraction efficiency, such as, the amount of adsorbent, extraction, and desorption time, and type and volume of the desorption solvent, were optimized. Under the optimized conditions, a good linearity ranging from 1-100 μg/L is obtained for all analytes, except for parathion (2-200 μg/L), where the correlation coefficients varied from 0.9960 to 0.9998. The limits of detection are 0.2-0.8 μg/L, and intraday and interday relative standard deviations are 1.7-7.4% (n = 5) and 3.8-8.0% (n = 3), respectively. The magnetic solid-phase extraction combined with high-performance liquid chromatography can be applied for the detection of trace targets in real water samples with satisfactory relative recoveries and relative standard deviations.

Determination of the acid values of edible oils via FTIR spectroscopy based on the OH stretching band

A new method for determining the acid values (AVs) of edible oils based on the OH stretching band was developed. The oil sample was diluted with carbon tetrachloride and was placed in a quartz cuvette with a thickness of 1cm to record the FTIR spectrum. The peak at 3535cm(-1), which corresponds to the OH stretch of the carboxyl group in free fatty acids, together with the peak valley at 3508cm(-1) and the spectral data in the range of 3340-3390cm(-1) were used to determine the AV of the edible oil. The excellent linear relationship between the AVs measured in this work and those measured using a titration method, with a correlation coefficient (R) of 0.9929, indicates that the present procedure can be applied as an alternative to the classic method for determining the AVs of edible oils.

Polyelectrolyte multilayers on magnetic silica as a new sorbent for the separation of trace copper in food samples and determination by flame atomic absorption spectrometry.

A novel magnetic silica sorbent with polyelectrolyte multilayers (PEMs) on its surface was prepared, and the sorbent was used for the magnetic solid phase extraction (MSPE) of trace Cu(2+) in drinking water with flame atomic absorption spectrometry (FAAS) as the detector. The experimental parameters for the MSPE procedure, such as the pH, desorption conditions, ultrasonic time and co-existing ions effects, were investigated. The adsorption capacity of the new sorbent was 14.7 mg g(-1) for Cu(2+). The detection limit of the developed method was 0.23 ng mL(-1) for Cu(2+) with an enrichment factor of 95.7. The analytical data obtained from the certified reference water and rice samples were in good agreement with the certified values. This method was also successfully applied to the determination of trace Cu(2+) in different food samples with satisfactory results.

Carbon-dot-based dual-emission silica nanoparticles as a ratiometric fluorescent probe for Bisphenol A

A simple and effective strategy for designing a ratiometric fluorescent nanosensor is described in this work. A carbon dots (CDs) based dual-emission nanosensor for Bisphenol A (BPA) was prepared by coating CDs on the surface of dye-doped silica nanoparticles. The fluorescence of dual-emission silica nanoparticles was quenched in hydrochloric acid by potassium bromate (KBrO3) oxidation; BPA inhibited KBrO3 oxidation, resulting in the ratiometric fluorescence response of dual-emission silica nanoparticles. Several important parameters affecting the performance of the nanosensor were investigated and optimized. The detection limit of this nanosensor was 0.80ng mL-1 with a linear range from 10 to 500ng mL-1. This was applied successfully to determine BPA in the leached solution of different plastic products with satisfactory results.

Layer-by-layer self-assembly of polyelectrolyte multilayers on silica spheres as reversed-phase/hydrophilic interaction mixed-mode stationary phases for high performance liquid chromatography

In this study, a series of stationary phases, comprising silica spheres and polyelectrolyte multilayers (PEMs) as the core and surface coating, respectively, were prepared via a layer-by-layer self-assembly approach for use in high-performance liquid chromatography. PEMs coatings were formed by the alternate deposition of positively charged poly(allylamine hydrochloride) and negatively charged poly(ethylene-alt-maleate) anions which were synthesized by esterification between poly(ethylene-alt-maleic anhydride) and n-alkyl alcohols (CnH2n+1OH, n=4, 8, 10, 12). The chromatographic performance and retention mechanism of the new stationary phases were evaluated in simultaneous reversed-phase/hydrophilic interaction mixed-mode chromatography using different solute probes, such as alkyl benzene, p-hydroxybenzoic acid and its esters, anilines, phenols, and pyrimidines. The separation performance of the new stationary phases was optimized by tuning the n-alkyl chain length of poly(ethylene-alt-maleate) and bilayer numbers of PEMs. These results indicated that the new stationary phases demonstrate promise for the simultaneous separation of complex hydrophobic and hydrophilic samples with high selectivity.