Xiuzheng Zhuang

The transformation pathways of nitrogen in sewage sludge during hydrothermal treatment

Hydrothermal treatment (HT) has been proved as a significant pretreatment in decreasing emissions of NOX pollutants from thermochemical utilization of sewage sludge (SS) derived solid fuel. This study aims to investigate the denitrification of HT and the redistribution of nitrogen (N) in different products so as to speculate the comprehensive pathway of N transformation during hydrothermal process. Results found that only 20% of N remained in hydrochar, whereas the rest of N (nearly 80%) was transformed into other phase. A majority of amino-N in SS was enriched in liquid phase in the form of Org-N at first, then further decomposed to NH4+-N. The remaining amino-N converted to pyrrole-N, pyridine-N and quaternary-N as temperature progresses. Meanwhile, amine-N derived from protein-N formed heterocyclic-N in oil phase via Diels-Alder reaction. NH3, the major nitrogenous gas, was dissolved in liquid as NH4+-N immediately after producing, but increased with prolonged reaction time.

Denitrification and desulphurization of industrial biowastes via hydrothermal modification

In attempt to decrease NOX and SO2 emission from thermochemical utilization, three industrial biowastes (penicillin mycelia waste, sewage sludge and peat waste) contained high nitrogen (N) and sulfur (S) were chosen to investigate the denitrification and desulphurization of hydrothermal modification. The results demonstrated that hydrothermal modification destroyed the structure of N- and S-containing components, thereby altering their existed conformations. Inorganic-N (N-IN) and most of amino-N/polyamide-N (N-A) were enriched by liquid phase in the forms of NH4+-N and soluble organic-N (Org-N), respectively; subsequently, Org-N could further decompose to NH4+-N at higher temperature. Residual N in hydrochars was converted from N-A to heterocyclic-N (pyrrolic-N, pyridinic-N and quaternary-N) via hydrolysis and cyclization. Similarly, over 60% of S was remove form biowastes at 240u202f°C. In solid phase, part of organic-S was altered to thiophenes-S after modified, while the remainder was transformed to inorganic-S; but the variation of inorganic-S in hydrochars strongly affected by its specific species.

Conversion of industrial biowastes to clean solid fuels via hydrothermal carbonization (HTC): Upgrading mechanism in relation to coalification process and combustion behavior

The aim of this work was to study the correlation between dynamic mechanisms of carbon structure associated with their upgrading effects with the help of XPS, 13C NMR and 2D-PCIS methods. Results showed the fuel qualifies of biowastes were improved and became comparable to lignite or even bitumite after HTC. The carbon chemical bonds of -C-H and -C-O in biowaste components (mainly protein and polysaccharide) were thermally cracked and enriched in liquid phase in the form of soluble intermediates, which subsequently generated coal-like structures via cyclization as well as polymerization at higher temperatures. The further investigation on thermogravimetric analysis found that the conversion of -C-H/C-O to aromatic -C-C/CC was beneficial for stabilizing their combustion behavior by integrating two stages of biowastes (devolatilization stage and combustion stage) into one stage of hydrochars (combustion stage).

Relationship between physicochemical properties and dewaterability of hydrothermal sludge derived from different source

Sewage sludge (SS) and deinking sludge (DS) were used to comparatively study the hydrothermal dewatering of sludge with different components. For a better overview, an insight into the relationship between physicochemical properties and dewaterability of hydrothermal sludge was provided. Results found that not all kinds of sludge were suitably conditioned by hydrothermal treatment (HT) in term of the elevation of dewaterability. Higher hydrothermal temperature tended to enhance the dewaterability of SS rather than DS, which was supported by the variation of their physicochemical properties (including water distribution, bonding energy, extracellular polymeric substance (EPS), particles size, acid functional groups and zeta potential in this study). In addition, the changes in surface morphology suggested that the reverse effect of HT on sludge dewaterability was mainly due to their dewatering behavior. For SS, the destruction of EPS structure leaded to the release of bound water, thereby strengthening sludge dewatering. Conversely, Bridging effect generated by lignocellulose in DS was beneficial for sludge dewatering; however, the increasing hydrothermal temperature degraded part of lignocellulose and weakened bridging effect, finally resulting in worse dewaterability of DS.

Relevance between chemical structure and pyrolysis behavior of palm kernel shell lignin

Palm kernel shell (PKS) lignin obtained by enzymatic/mild acid hydrolysis (EMAL) was thoroughly elucidated by FTIR (fourier transform infrared), 13C-1H 2D-NMR (nuclear magnetic resonance), quantitative 31P NMR combined with DFRC (derivatization followed by reductive cleavage), and Py-GC/MS (pyrolysis-gas chromatography/mass spectrometry) with and without TMAH (tetramethylammonium hydroxide). Pyrolysis behavior was then characterized by TG-FTIR-MS (thermo-gravimetric-FTIR-mass spectrometry) and Py-GC/MS. The PKS lignin is demonstrated to be a p-hydroxyphenyl-guaiacyl-syringyl (H-G-S) lignin with abundances of p-hydrobenzoates and low S/G ratio of 0.15. 2D-NMR indicated that the main substructures are β-O-4-ethers (~85%), and 31P NMR/DFRC quantified the total β-O-4 content of 2295μmol/g. Py-GC/MS with and without TMAH confirmed that phenol mainly originated from p-hydroxybenzoates units. Thermal-stability, evolution behavior of typical volatiles, and selectivity of phenolic compounds (H-, G-, S-, C-type) during PKS lignin pyrolysis were explored. Relationship between chemical structure and pyrolysis behavior are also obtained. This work will provide a deep insight to the effective utilization of PKS.