Yen-Chang Chen

Nature inspiring processing route toward high throughput production of perovskite photovoltaics

We report our results of developing perovskite thin films with high coverage, improved uniformity and preserved crystalline continuity in a single pass deposition. This approach, inspired by the natural phenomena of tears of wine, works by regulating the hydrodynamics of the material comprising of droplets during spray-pyrolysis. In contrast to conventional spray-pyrolysis where droplets dry independently and form a rough morphology, the use of binary solvent system creates localized surface tension gradients that initiate Marangoni flows, thus directing the incoming droplets to spontaneously undergo coalescing, merging and spreading into a continuous wet films before drying. By systematically exploring the dynamics of spreading and drying, we achieve spray-coated perovskite photovoltaics with power conversion efficiency of 14.2%, a near two-fold improvement than that of the spray-pyrolysis counterpart. Of particular significance is the fact that the single pass deposition technique unveils novel inroads in efficient management of lead consumption during deposition.

Electrohydrodynamic-assisted Assembly of Hierarchically Structured, 3D Crumpled Nanostructures for Efficient Solar Conversions

The tantalizing prospect of harnessing the unique properties of graphene crumpled nanostructures continues to fuel tremendous interest in energy storage and harvesting applications. However, the paper ball-like, hard texture, and closed-sphere morphology of current 3D graphitic nanostructure production not only constricts the conductive pathways but also limits the accessible surface area. Here, we report new insights into electrohydrodynamically-generated droplets as colloidal nanoreactors in that the stimuli-responsive nature of reduced graphene oxide can lead to the formation of crumpled nanostructures with a combination of open structures and doubly curved, saddle-shaped edges. In particular, the crumpled nanostructures dynamically adapt to non-spherical, polyhedral shapes under continuous deposition, ultimately assembling into foam-like microstructures with a highly accessible surface area and spatially interconnected transport pathways. The implementation of such crumpled nanostructures as three-dimensional rear contacts for solar conversion applications realize benefits of a high aspect ratio, electrically addressable and energetically favorable interfaces, and substantial enhancement of both short-circuit currents and fill-factors compared to those made of planar graphene counterparts. Further, the 3D crumpled nanostructures may shed lights onto the development of effective electrocatalytic electrodes due to their open structure that simultaneously allows for efficient water flow and hydrogen escape.

Low temperature excitonic spectroscopy and dynamics as a probe of quality in hybrid perovskite thin films

We have developed a framework for using temperature dependent static and dynamic photoluminescence (PL) of hybrid organic-inorganic perovskites (PVSKs) to characterize lattice defects in thin films, based on the presence of nanodomains at low temperature. Our high-stability PVSK films are fabricated using a novel continuous liquid interface propagation technique, and in the tetragonal phase (T > 120 K), they exhibit bi-exponential recombination from free charge carriers with an average PL lifetime of ∼200 ns. Below 120 K, the emergence of the orthorhombic phase is accompanied by a reduction in lifetimes by an order of magnitude, which we establish to be the result of a crossover from free carrier to exciton-dominated radiative recombination. Analysis of the PL as a function of excitation power at different temperatures provides direct evidence that the exciton binding energy is different in the two phases, and using these results, we present a theoretical approach to estimate this variable binding energy. Our findings explain this anomalous low temperature behavior for the first time, attributing it to an inherent fundamental property of the hybrid PVSKs that can be used as an effective probe of thin film quality.

High-throughput label-free microcontact printing graphene-based biosensor for valley fever

The highly prevalent and virulent disease in the Western Hemisphere Coccidioidomycosis, also known as Valley Fever, can cause serious illness such as severe pneumonia with respiratory failure. It can also take on a disseminated form where the infection spreads throughout the body. Thus, a serious impetus exists to develop effective detection of the disease that can also operate in a rapid and high-throughput fashion. Here, we report the assembly of a highly sensitive biosensor using reduced graphene oxide (rGO) with Coccidioides(cocci) antibodies as the target analytes. The facile design made possible by the scalable microcontact printing (μCP) surface patterning technique which enables rapid, ultrasensitive detection. It provides a wide linear range and sub picomolar (2.5 pg/ml) detection, while also delivering high selectivity and reproducibility. This work demonstrates an important advancement in the development of a sensitive label-free rGO biosensor for Coccidioidomycosis detection. This result also provides the potential application of direct pathogen diagnosis for the future biosensor development.

Photovoltaic and optical properties of perovskite thin films fabricated using Marangoni flow assisted electrospraying.

We have developed an electrospraying technique inspired from Marangoni flow seen in nature. We demonstrate our ability to synthesise highly crystalline uniform perovskite thin films with enhanced coverage and high absorption. Due to a difference in the vapour pressure of DMSO and NMP, a gradient force is developed that helps in propagating the incoming precursor droplet to coalesce and merge with other droplets thus inducing a dynamic self-assembly within the thin film. This results in thin films with high uniformity and good morphological and topological characteristics, that collectivelty resulted in a respectable PCE of greater than 14%. Optical studies are conducted in parallel to better understand the energy phase space of perovskite crystals. The high temperature tetragonal phase showed a high recombination rate of 180 ns, ideal for photovoltaic performances, while the low temperature measurements reveal considerable complexity in spectral and dynamic properties that demand further invesgtiation.