Yen-Ping Peng

Synergistic effects of surfactant-assisted ionic liquid pretreatment rice straw.

The aim of this work was to study an environmentally friendly method for pretreating rice straw by using 1-butyl-3-methylimidazolium chloride ([BMIM]Cl) as an ionic liquid (IL) assisted by surfactants. Different temperatures, reaction times, and surfactant concentrations were studied. Compared with [BMIM]Cl only pretreatment, the addition of 1% sodium dodecyl sulfate (SDS) and 1% cetyl trimethyl ammonium bromide (CTAB) increased lignin removal to 49.48% and 34.76%, respectively. Untreated and pretreated rice straw was thoroughly characterized through FTIR, XRD, and FE-SEM. Cellulose crystallinity and surface morphology of the rice straw were substantially altered after surfactant-assisted IL pretreatment. In conclusion, surfactant-assisted IL pretreatment is an effective method for producing fermentable sugars from lignocellulosic substrates.

Photoelectrochemical oxidation of ibuprofen via Cu2O-doped TiO2 nanotube arrays

A p-n junction based Cu2O-doped TiO2 nanotube arrays (Cu2O-TNAs) were synthesized and used as a working anode in a photoelectrochemical (PEC) system. The results revealed that the Cu2O-TNAs were dominated by the anatase phase and responded significantly to visible light. XPS analyses indicated that with an amount of 24.79% Cu doping into the structure, the band gap of Cu2O-TNAs was greatly reduced. SEM images revealed that the supported TiO2 nanotubes had diameters of approximately 80nm and lengths of about 2.63μm. Upon doping with Cu2O, the TiO2 nanotubes maintained their structural integrity, exhibiting no significant morphological change, favoring PEC applications. Under illumination, the photocurrent from Cu2O/TNAs was 2.4 times larger than that from TNAs, implying that doping with Cu2O significantly improved electron mobility by reducing the rate of recombination of electron-hole pairs. The EIS and Bode plot revealed that the estimated electron lifetimes, τel, of TNAs and Cu2O/TNAs were 6.91 and 26.26ms, respectively. The efficiencies of degradation of Ibuprofen by photoelectrochemical, photocatalytic (PC), electrochemical (EC) and photolytic (P) methods were measured.

The effect of surfactant-assisted ultrasound-ionic liquid pretreatment on the structure and fermentable sugar production of a water hyacinth

This study investigated the possibility of enhancing the disruption of water hyacinth (WH) in an ultrasound-ionic liquid (US-IL) pretreatment assisted by sodium dodecyl sulfate (SDS). 1-butyl-3-methylimidazolium chloride ([BMIM]Cl) was used to dissolve the WH. The optimum concentration of SDS for the highest production of reducing sugar was also determined. Compared to the US-IL pretreatment, the production of reducing sugars, cellulose conversion and delignification were increased by 72.23%, 58.74% and 21.01%, respectively, upon addition of 0.5% SDS. Moreover, the enhancement of SDS in the US-IL pretreatment was confirmed by the analysis of structural features, which demonstrated that the SDS increased the removal of lignin and decreased the cellulose crystallinity.

Nano Zerovalent Iron Particles Induce Pulmonary and Cardiovascular Toxicity in an in Vitro Human Co-culture Model

Abstract Despite promising environmental applications for nano zerovalent iron (nZVI), concerns remain about the potential accumulation and toxic effects of nZVI particles. Here, we use an alveolar-capillary co-culture model to investigate a possible link between low-level epithelial exposure to nZVI and pulmonary and cardiovascular toxicity. While nZVI was unable to pass through the epithelial barrier into the endothelium, nZVI exposure did cause oxidative and inflammatory responses in both epithelial and endothelial cells. Therefore, toxic effects induced by nZVI are not restricted to epithelial cells but can be transferred into the endothelium. Communication between A549 and EA.hy926 cells is responsible for amplification of nZVI-induced toxic responses. Decreases in transepithelial electrical resistance and zonula occludens proteins after epithelial exposure to nZVI impaired epithelial barrier integrity. Increases in oxidized α1-antitrypsin and oxidized low-density lipoprotein in the co-culture model suggest that nZVI exposure increases the risk of chronic obstructive pulmonary disease and atherosclerosis. Therefore, inhalation of nZVI has the potential to induce cardiovascular disease through oxidative and inflammatory mediators produced from the damaged lung epithelium in chronic lung diseases.

Cu2O loaded titanate nanotube arrays for simultaneously photoelectrochemical ibuprofen oxidation and hydrogen generation.

A p-n junction Cu2O doped TiO2 nanotube arrays (Cu2O/TNAs) were synthesized by square wave voltammetry electrochemical (SWVE) deposition method and employed as the working anode. The crystalline, optical properties, surface morphology, and structure of the Cu2O/TNAs were characterized by XRD, UV-vis absorbance edges, SEM, and XPS. Results showed that the Cu2O/TNAs were dominated by anatase phase after sintering at 450 °C with significant visible light response. XPS finding confirmed XRD results that the copper element in Cu2O/TNAs was Cu (I) instead of Cu (II). SEM images illustrated the diameter and the length of supported TiO2 nanotubes was approximately 100 nm and 2.75-4.34 μm, respectively. After Cu2O doping, the nano-tubular structure of TiO2 nanotube kept its integrity with no significant morphological change, which was beneficial for PEC applications. The photocurrent of Cu2O/TNAs was 1.45 times larger than that of TNAs, implying that Cu2O doping significantly enhanced electron mobility by reducing the recombination of electron-hole pairs. In addition, electrochemical impedance spectroscopy (EIS) measurements revealed that the recombination of photogenerated electron-hole pairs was inhibited as the bias potential was applied. Results of Bode plot further demonstrated that the electron lifetime τel of Cu2O/TNAs-20 (30.79 ms), under 0.5 V bias potential, was about 2.23 times higher than that of pure TNAs (13.82 ms). Results of electron spin resonance (ESR) analyses demonstrate that the hydroxyl radicals (OH) are responsible for the PEC decomposition of Ibuprofen.

Characterization of a thermophilic cellulase from Geobacillus sp. HTA426, an efficient cellulase-producer on alkali pretreated of lignocellulosic biomass

A themophilic cellulase-producing bacterium was isolated from a hot spring district and identified as Geobacillus sp. HTA426. The cellulase enzyme produced by the Geobacillus sp. HTA426 was purified through ammonium sulfate precipitation and ion exchange chromatography, with the recovery yield and fold purification of 10.14% and 5.12, respectively. The purified cellulase has a molecular weight of 40 kDa. The optimum temperature and pH for carboxymethyl cellulase (CMCase) activity of the purified cellulase were 60°C and pH 7.0, respectively. The enzyme was also stable over a wide temperature range of 50°C to 70°C after 5 h of incubation. Moreover, the strain HTA426 was able to grow and produce cellulase on alkali-treated sugarcane bagasse, rice straw and water hyacinth as carbon sources. Enzymatic hydrolysis of sugarcane bagasse, which was regarded as the most effective carbon source for cellulase production (CMCase activity = 103.67 U/mL), followed by rice straw (74.70 U/mL) and water hyacinth (51.10 U/mL). This strain producing an efficient thermostable cellulose is a potential candidate for developing a more efficient and cost-effective process for converting lignocellulosic biomass into biofuel and other industrial process.

Enhanced bioelectricity generation and azo dye treatment in a reversible photo-bioelectrochemical cell by using novel anthraquinone-2,6-disulfonate (AQDS)/MnOx-doped polypyrrole film electrodes.

A novel anthraquinone-2,6-disulfonate/MnOx-doped polypyrrole film (AQDS/Mn/PPy) electrode was prepared by one-step electropolymerization method and was used to improve performance of a reversible photo-bioelectrochemical cell (RPBEC). The RPBEC was operated in polarity reversion depended on dark/light reaction of alga Chlorella vulgaris by which sequential decolorization of azo dye and mineralization of decolorization products coupled with bioelectricity generation can be achieved. The results showed that formation of uniform AQDS/Mn/PPy film significantly enhanced electroactive surface area and electrocatalytic activity of carbon electrode. The RPBEC with AQDS/Mn/PPy electrodes demonstrated 77% increases in maximum power and 73% increases in Congo red decolorization rate before polarity reversion, and 198% increases in maximum power and 138% increases in decolorization products mineralization rate after polarity reversion, respectively, compared to the RPBEC with bare electrode. This was resulted from simultaneous dynamics improvement in half-reaction rate of anode and photo-biocathode due to enhanced electron transfer and algal-bacterial biofilm formation.

Enhanced photoelectrochemical degradation of Ibuprofen and generation of hydrogen via BiOI-deposited TiO 2 nanotube arrays

This study employed BiOI-deposited TiO2 nanotube arrays (BiOI-TNTAs) electrode in a photoelectrochemical (PEC) system to oxidize Ibuprofen and generate hydrogen in the anodic and cathodic chamber, respectively. FESEM results revealed the diameter of TiO2 nanotubes was 90-110nm. According to the XRD analysis, the BiOI-TNTAs were dominated by the anatase phase and tetragonal structure of BiOI. XPS results confirmed the coexistence of BiOI in the BiOI-TNTAs associated with Bi (33.76%) and I (8.81%). UV-vis absorption spectra illustrated BiOI-TNTAs exhibit strong absorptions in the visible light region. The PEC method showed the best degradation efficiency for Ibuprofen is a rate constant of 3.21×10-2min-1. The results of the Nyquist plot revealed the recombination of photogenerated electron-hole pairs was inhibited as the bias potential was applied. Furthermore, the Bode plot demonstrated the lifetime (τel) of photoexcited electrons of BiOI-TNTAs was 1.8 and 4.1 times longer than that of BiOI-Ti and TNTAs, respectively. In the cathodic chamber, the amount of hydrogen generation reached 219.94μM/cm2 after 3h of reaction time.

Effects of heavy metals on health risk and characteristic in surrounding atmosphere of tire manufacturing plant, Taiwan

The health and environmental effects of metal-containing carbon black (CB) particles emitted from a CB feeding area near a tire manufacturing plant were investigated. The mass ratios of PM1 and PM0.1 (UFPs) relative to TSP were 13.84% ± 4.88% and 50.84% ± 4.29%, respectively. The most abundant elements in all fractions were Fe, Al, and Zn. The mean percentage contributions of Al, Fe, Zn, Cu, and Co to the coarse particles ranged from 49.1% to 69.1%, thus indicating that the Al, Fe, and Zn contents in the CB particles were affected by workplace emissions. The ratios of the total mean deposition fluxes of atmospheric particle-bound heavy metals in the human respiratory tracts of workers/adults, workers/children, and adults/children were approximately 5.5, 11.0, and 2.0, respectively. The integrated risks of five elements via two exposure pathways to adults and children were 1.1 × 10−4 and 1.7 × 10−5, respectively; these numbers reflect the high cumulative carcinogenic risk posed by these toxic metals to local residents (both adults and children; limit, 10−6). These results demonstrate the potential health risk presented by particle-bound heavy metals to humans residing near tire manufacturing plants via inhalation and dermal contact exposure.

A novel three-stage treatment train for the remediation of trichloroethylene-contaminated groundwater

This study used a novel three-stage treatment train that was composed of chemical oxidation, anaerobic bioremediation and a passive reactive barrier (PRB) to remediate trichloroethylene (TCE)-contaminated groundwater. Batch oxidation and biodegradation experiments and a continuous column study were used to evaluate the compatibility of different technologies and the feasibility of the removal of TCE by the treatment train. The results of batch experiments show that high concentrations of TCE (50 mg L−1) were removed completely by the addition of 5000 to 50 000 mg L−1 persulfate during 24 to 96 h of reaction. Ferrous ion-activated persulfate may result in a residue of TCE due to the rapid consumption of persulfate by ferrous ions. Significant inhibition of soil bacteria was observed upon the addition of persulfate in concentrations greater than 20 000 mg L−1. Both low pH and the oxidative stress of persulfate were responsible for the adverse effect on indigenous microorganisms. The results of a microcosm study reveal that the presence of high concentrations of sulfate (up to 50 000 mg L−1) had no adverse effect on TCE removal. Sulfate significantly enhanced the dechlorination of vinyl chloride via sulfate reduction, which demonstrates that sulfate produced from persulfate oxidation could be utilized by indigenous bacteria to achieve the complete dechlorination of TCE. The addition of 5000 to 50 000 mg L−1 bioremediation reagent improved the degradation of TCE. Dechlorinating bacteria, Dehalococcoides, and the reductive dehalogenase, vcrA, of Dehalococcoides were detected during TCE biodegradation. The results of a column study show that the proposed treatment train removed TCE and its byproducts effectively and there was no problem with the connection of chemical oxidation and anaerobic bioremediation in the novel treatment train technology. The use of 10 000 mg L−1 of persulfate and the bioremediation reagent, and the PRB that can continuously release 6000 mg L−1 of persulfate are suggested to operate the treatment train. The proposed treatment scheme will provide a more effective alternative for the remediation of contaminated sites in the future.