Yi Xie

Mixed transition-metal oxides: design, synthesis, and energy-related applications.

A promising family of mixed transition-metal oxides (MTMOs) (designated as Ax B3-x O4 ; A, B=Co, Ni, Zn, Mn, Fe, etc.) with stoichiometric or even non-stoichiometric compositions, typically in a spinel structure, has recently attracted increasing research interest worldwide. Benefiting from their remarkable electrochemical properties, these MTMOs will play significant roles for low-cost and environmentally friendly energy storage/conversion technologies. In this Review, we summarize recent research advances in the rational design and efficient synthesis of MTMOs with controlled shapes, sizes, compositions, and micro-/nanostructures, along with their applications as electrode materials for lithium-ion batteries and electrochemical capacitors, and efficient electrocatalysts for the oxygen reduction reaction in metal-air batteries and fuel cells. Some future trends and prospects to further develop advanced MTMOs for next-generation electrochemical energy storage/conversion systems are also presented.

Partially oxidized atomic cobalt layers for carbon dioxide electroreduction to liquid fuel

Electroreduction of CO2 into useful fuels, especially if driven by renewable energy, represents a potentially ‘clean’ strategy for replacing fossil feedstocks and dealing with increasing CO2 emissions and their adverse effects on climate. The critical bottleneck lies in activating CO2 into the CO2•− radical anion or other intermediates that can be converted further, as the activation usually requires impractically high overpotentials. Recently, electrocatalysts based on oxide-derived metal nanostructures have been shown to enable CO2 reduction at low overpotentials. However, it remains unclear how the electrocatalytic activity of these metals is influenced by their native oxides, mainly because microstructural features such as interfaces and defects influence CO2 reduction activity yet are difficult to control. To evaluate the role of the two different catalytic sites, here we fabricate two kinds of four-atom-thick layers: pure cobalt metal, and co-existing domains of cobalt metal and cobalt oxide. Cobalt mainly produces formate (HCOO−) during CO2 electroreduction; we find that surface cobalt atoms of the atomically thin layers have higher intrinsic activity and selectivity towards formate production, at lower overpotentials, than do surface cobalt atoms on bulk samples. Partial oxidation of the atomic layers further increases their intrinsic activity, allowing us to realize stable current densities of about 10 milliamperes per square centimetre over 40 hours, with approximately 90 per cent formate selectivity at an overpotential of only 0.24 volts, which outperforms previously reported metal or metal oxide electrodes evaluated under comparable conditions. The correct morphology and oxidation state can thus transform a material from one considered nearly non-catalytic for the CO2 electroreduction reaction into an active catalyst. These findings point to new opportunities for manipulating and improving the CO2 electroreduction properties of metal systems, especially once the influence of both the atomic-scale structure and the presence of oxide are mechanistically better understood.

Low Overpotential in Vacancy-Rich Ultrathin CoSe2 Nanosheets for Water Oxidation

According to Yang Shao-Horns principle, CoSe2 is a promising candidate as an efficient, affordable, and sustainable alternative electrocatalyst for the oxygen evolution reaction, owing to its well-suited electronic configuration of Co ions. However, the catalytic efficiency of pure CoSe2 is still far below what is expected, because of its poor active site exposure yield. Herein, we successfully overcome the disadvantage of insufficient active sites in bulk CoSe2 by reducing its thickness into the atomic scale rather than any additional modification (such as doping or hybridizing with graphene or noble metals). The positron annihilation spectrometry and XAFS spectra provide clear evidence that a large number of VCo″ vacancies formed in the ultrathin nanosheets. The first-principles calculations reveal that these VCo″ vacancies can serve as active sites to efficiently catalyze the oxygen evolution reaction, manifesting an OER overpotential as low as 0.32 V at 10 mA cm(-2) in pH 13 medium, which is superior to the values for its bulk counterparts as well as those for the most reported Co-based electrocatalysts. Considering the outstanding performance of the simple, unmodified ultrathin CoSe2 nanosheets as the only catalyst, further improvement of the catalytic activity is expected when various strategies of doping or hybridizing are used. These results not only demonstrate the potential of a notable, affordable, and earth-abundant water oxidation electrocatalyst based on ultrathin CoSe2 nanosheets but also open up a promising avenue into the exploration of excellent active and durable catalysts toward replacing noble metals for oxygen electrocatalysis.

Oxygen Vacancies Confined in Ultrathin Indium Oxide Porous Sheets for Promoted Visible-Light Water Splitting

Finding an ideal model for disclosing the role of oxygen vacancies in photocatalysis remains a huge challenge. Herein, O-vacancies confined in atomically thin sheets is proposed as an excellent platform to study the O-vacancy-photocatalysis relationship. As an example, O-vacancy-rich/-poor 5-atom-thick In2O3 porous sheets are first synthesized via a mesoscopic-assembly fast-heating strategy, taking advantage of an artificial hexagonal mesostructured In-oleate complex. Theoretical/experimental results reveal that the O-vacancies endow 5-atom-thick In2O3 sheets with a new donor level and increased states of density, hence narrowing the band gap from the UV to visible regime and improving the carrier separation efficiency. As expected, the O-vacancy-rich ultrathin In2O3 porous sheets-based photoelectrode exhibits a visible-light photocurrent of 1.73 mA/cm(2), over 2.5 and 15 times larger than that of the O-vacancy-poor ultrathin In2O3 porous sheets- and bulk In2O3-based photoelectrodes.

Fabrication of flexible and freestanding zinc chalcogenide single layers

Inorganic graphene analogues (IGAs) are a conceptually new class of materials with attractive applications in next-generation flexible and transparent nanodevices. However, their species are only limited to layered compounds, and the difficulty in extension to non-layered compounds hampers their widespread applicability. Here we report the fabrication of large-area freestanding single layers of non-layered ZnSe with four-atomic thickness, using a strategy involving a lamellar hybrid intermediate. Their surface distortion, revealed by means of synchrotron radiation X-ray absorption fine structure spectroscopy, is shown to give rise to a unique electronic structure and an excellent structural stability, thus determining an enhanced solar water splitting efficiency and photostability. The ZnSe single layers exhibit a photocurrent density of 2.14 mA cm(-2) at 0.72 V versus Ag/AgCl under 300 W Xe lamp irradiation, 195 times higher than that of bulk counterpart. This work opens the door for extending atomically thick IGAs to non-layered compounds and holds promise for a wealth of innovative applications.

Ultrathin Black Phosphorus Nanosheets for Efficient Singlet Oxygen Generation.

Benefiting from its strong oxidizing properties, the singlet oxygen has garnered serious attentions in physical, chemical, as well as biological studies. However, the photosensitizers for the generation of singlet oxygen bear in low quantum yields, lack of long wavelength absorption band, poor biocompatibility, undegradable in living tissues, and so on. Here we first demonstrate the exfoliated black phosphorus nanosheets to be effective photosensitizers for the generation of singlet oxygen with a high quantum yield of about 0.91, rendering their attractive applications in catalysis and photodynamic therapy. Through in vitro and in vivo studies, the water dispersible black phosphorus nanosheets show notable cancer therapy ability. In addition, the photodegradable character of black phosphorus from element to biocompatible phosphorus oxides further highlights its therapeutic potential against cancer. This study will not only expand the breadth of study in black phosphorus but also offer an efficient catalyst and photodynamic therapy agent.

Atomically Thick Bismuth Selenide Freestanding Single Layers Achieving Enhanced Thermoelectric Energy Harvesting

Thermoelectric materials can realize significant energy savings by generating electricity from untapped waste heat. However, the coupling of the thermoelectric parameters unfortunately limits their efficiency and practical applications. Here, a single-layer-based (SLB) composite fabricated from atomically thick single layers was proposed to optimize the thermoelectric parameters fully. Freestanding five-atom-thick Bi(2)Se(3) single layers were first synthesized via a scalable interaction/exfoliation strategy. As revealed by X-ray absorption fine structure spectroscopy and first-principles calculations, surface distortion gives them excellent structural stability and a much increased density of states, resulting in a 2-fold higher electrical conductivity relative to the bulk material. Also, the surface disorder and numerous interfaces in the Bi(2)Se(3) SLB composite allow for effective phonon scattering and decreased thermal conductivity, while the 2D electron gas and energy filtering effect increase the Seebeck coefficient, resulting in an 8-fold higher figure of merit (ZT) relative to the bulk material. This work develops a facile strategy for synthesizing atomically thick single layers and demonstrates their superior ability to optimize the thermoelectric energy harvesting.

Atomically-thin non-layered cobalt oxide porous sheets for highly efficient oxygen-evolving electrocatalysts

Water electrolysis for hydrogen production requires better catalysts to lower the kinetic barrier of the oxygen evolution reaction. Herein, conceptually-new, noble-metal-free, porous, atomically-thick sheets are first put forward as an excellent platform to promote the oxygen evolution activity through affording abundant catalytically active sites and enhanced two-dimensional conductivity. As an example, the synthetic porous Co3O4 atomically-thick sheets with a thickness of 0.43 nm and about 30% pore occupancy afford low-coordinated Co3+ atoms to serve as the catalytically active sites, while the obviously increased density of states at the valence band and conduction band edge facilitate fast electron transport along their two-dimensional conducting paths. As a result, the porous, atomically-thick Co3O4 sheets exhibit an electrocatalytic current up to 341.7 mAxa0cm−2, roughly 50-times larger than that of the bulk counterpart and even more strikingly higher than that of most existing reports under similar conditions. This work holds great promise for triggering breakthroughs in the field of electrocatalysis.

Ultrathin two-dimensional inorganic materials: new opportunities for solid state nanochemistry.

CONSPECTUS: The ultimate goal of solid state chemistry is to gain a clear correlation between atomic, defect, and electronic structure and intrinsic properties of solid state materials. Solid materials can generally be classified as amorphous, quasicrystalline, and crystalline based on their atomic arrangement, in which crystalline materials can be further divided into single crystals, microcrystals, and nanocrystals. Conventional solid state chemistry mainly focuses on studying single crystals and microcrystals, while recently nanocrystals have become a hot research topic in the field of solid state chemistry. As more and more nanocrystalline materials have been artificially fabricated, the solid state chemistry for studying those nanosolids has become a new subdiscipline: solid state nanochemistry. However, solid state nanochemistry, usually called nanochemistry for short, primarily studies the microstructures and macroscopic properties of a nanomaterials aggregation states. Due to abundant microstructures in the aggregation states, it is only possible to build a simple but imprecise correlation between the microscopic morphology and the macroscopic properties of the nanostructures. Notably, atomically thin two-dimensional inorganic materials provide an ideal platform to establish clear structure-property relationships in the field of solid state nanochemistry, thanks to their homogeneous dispersion without the assistance of a capping ligand. In addition, their atomic structures including coordination number, bond length, and disorder degree of the examined atoms can be clearly disclosed by X-ray absorption fine structure spectroscopy. Also, their more exposed interior atoms would inevitably induce the formation of various defects, which would have a non-negligible effect on their physicochemical properties. Based on the obtained atomic and defect structural characteristics, density-functional calculations are performed to study their electronic structures. Then, after the properties of the individual ultrathin two-dimensional materials or their assembled highly oriented thin film-based nanodevices are measured, the explicit relationship between atomic, defect, and electronic structure and intrinsic properties could be established. In this Account, we focus on our recent advances in the field of solid state nanochemistry, including atomic structure characterization of ultrathin two-dimensional inorganic materials by X-ray absorption fine structure spectroscopy, characterization of their different types of structural defects by positron annihilation spectra and electron spin resonance, and investigation of their electronic structure by density-functional calculations. In addition, we summarize the close correlation between atomic, defect, and electronic structure variations and the optoelectronic, electrical, magnetic, and thermal properties of ultrathin two-dimensional materials. Finally, we also propose the major challenges and opportunities that face solid state nanochemistry. We believe that all the past achievements in ultrathin two-dimensional materials could bring new opportunities for solid state nanochemistry.

Heterogeneous spin states in ultrathin nanosheets induce subtle lattice distortion to trigger efficient hydrogen evolution

The exploration of efficient nonprecious metal eletrocatalysis of the hydrogen evolution reaction (HER) is an extraordinary challenge for future applications in sustainable energy conversion. The family of first-row-transition-metal dichalcogenides has received a small amount of research, including the active site and dynamics, relative to their extraordinary potential. In response, we developed a strategy to achieve synergistically active sites and dynamic regulation in first-row-transition-metal dichalcogenides by the heterogeneous spin states incorporated in this work. Specifically, taking the metallic Mn-doped pyrite CoSe2 as a self-adaptived, subtle atomic arrangement distortion to provide additional active edge sites for HER will occur in the CoSe2 atomic layers with Mn incorporated into the primitive lattice, which is visually verified by HRTEM. Synergistically, the density functional theory simulation results reveal that the Mn incorporation lowers the kinetic energy barrier by promoting H-H bond formation on two adjacently adsorbed H atoms, benefiting H2 gas evolution. As a result, the Mn-doped CoSe2 ultrathin nanosheets possess useful HER properties with a low overpotential of 174 mV, an unexpectedly small Tafel slope of 36 mV/dec, and a larger exchange current density of 68.3 μA cm(-2). Moreover, the original concept of coordinated regulation presented in this work can broaden horizons and provide new dimensions in the design of newly highly efficient catalysts for hydrogen evolution.