Chong Xiao

Vacancy Associates Promoting Solar-Driven Photocatalytic Activity of Ultrathin Bismuth Oxychloride Nanosheets

Crystal facet engineering of semiconductors is of growing interest and an important strategy for fine-tuning solar-driven photocatalytic activity. However, the primary factor in the exposed active facets that determines the photocatalytic property is still elusive. Herein, we have experimentally achieved high solar photocatalytic activity in ultrathin BiOCl nanosheets with almost fully exposed active {001} facets and provide some new and deep-seated insights into how the defects in the exposed active facets affect the solar-driven photocatalytic property. As the thickness of the nanosheets reduces to atomic scale, the predominant defects change from isolated defects V(Bi)‴ to triple vacancy associates V(Bi)‴V(O)••V(Bi)‴, which is unambiguously confirmed by the positron annihilation spectra. By virtue of the synergic advantages of enhanced adsorption capability, effective separation of electron–hole pairs and more reductive photoexcited electrons benefited from the V(Bi)‴V(O)••V(Bi)‴ vacancy associates, the ultrathin BiOCl nanosheets show significantly promoted solar-driven photocatalytic activity, even with extremely low photocatalyst loading. The finding of the existence of distinct defects (different from those in bulks) in ultrathin nanosheets undoubtedly leads to new possibilities for photocatalyst design using quasi-two-dimensional materials with high solar-driven photocatalytic activity.

Low Overpotential in Vacancy-Rich Ultrathin CoSe2 Nanosheets for Water Oxidation

According to Yang Shao-Horns principle, CoSe2 is a promising candidate as an efficient, affordable, and sustainable alternative electrocatalyst for the oxygen evolution reaction, owing to its well-suited electronic configuration of Co ions. However, the catalytic efficiency of pure CoSe2 is still far below what is expected, because of its poor active site exposure yield. Herein, we successfully overcome the disadvantage of insufficient active sites in bulk CoSe2 by reducing its thickness into the atomic scale rather than any additional modification (such as doping or hybridizing with graphene or noble metals). The positron annihilation spectrometry and XAFS spectra provide clear evidence that a large number of VCo″ vacancies formed in the ultrathin nanosheets. The first-principles calculations reveal that these VCo″ vacancies can serve as active sites to efficiently catalyze the oxygen evolution reaction, manifesting an OER overpotential as low as 0.32 V at 10 mA cm(-2) in pH 13 medium, which is superior to the values for its bulk counterparts as well as those for the most reported Co-based electrocatalysts. Considering the outstanding performance of the simple, unmodified ultrathin CoSe2 nanosheets as the only catalyst, further improvement of the catalytic activity is expected when various strategies of doping or hybridizing are used. These results not only demonstrate the potential of a notable, affordable, and earth-abundant water oxidation electrocatalyst based on ultrathin CoSe2 nanosheets but also open up a promising avenue into the exploration of excellent active and durable catalysts toward replacing noble metals for oxygen electrocatalysis.

Atomically Thick Bismuth Selenide Freestanding Single Layers Achieving Enhanced Thermoelectric Energy Harvesting

Thermoelectric materials can realize significant energy savings by generating electricity from untapped waste heat. However, the coupling of the thermoelectric parameters unfortunately limits their efficiency and practical applications. Here, a single-layer-based (SLB) composite fabricated from atomically thick single layers was proposed to optimize the thermoelectric parameters fully. Freestanding five-atom-thick Bi(2)Se(3) single layers were first synthesized via a scalable interaction/exfoliation strategy. As revealed by X-ray absorption fine structure spectroscopy and first-principles calculations, surface distortion gives them excellent structural stability and a much increased density of states, resulting in a 2-fold higher electrical conductivity relative to the bulk material. Also, the surface disorder and numerous interfaces in the Bi(2)Se(3) SLB composite allow for effective phonon scattering and decreased thermal conductivity, while the 2D electron gas and energy filtering effect increase the Seebeck coefficient, resulting in an 8-fold higher figure of merit (ZT) relative to the bulk material. This work develops a facile strategy for synthesizing atomically thick single layers and demonstrates their superior ability to optimize the thermoelectric energy harvesting.

General Formation of Complex Tubular Nanostructures of Metal Oxides for the Oxygen Reduction Reaction and Lithium‐Ion Batteries

General Formation of Complex Tubular Nanostructures of Metal Oxides for the Oxygen Reduction Reaction and LithiumIon Batteries Tube in a tube : A general strategy for the fabrication of novel complex tube-in-tube nanostructures for many metal oxides has been developed. The method involves coating carbon nanofibers with a layer of metal glycolate followed by calcination in air. The unique complex tubular structures of metal oxides are shown to exhibit promising properties for the title applications. Angewandte Chemie

Heterogeneous spin states in ultrathin nanosheets induce subtle lattice distortion to trigger efficient hydrogen evolution

The exploration of efficient nonprecious metal eletrocatalysis of the hydrogen evolution reaction (HER) is an extraordinary challenge for future applications in sustainable energy conversion. The family of first-row-transition-metal dichalcogenides has received a small amount of research, including the active site and dynamics, relative to their extraordinary potential. In response, we developed a strategy to achieve synergistically active sites and dynamic regulation in first-row-transition-metal dichalcogenides by the heterogeneous spin states incorporated in this work. Specifically, taking the metallic Mn-doped pyrite CoSe2 as a self-adaptived, subtle atomic arrangement distortion to provide additional active edge sites for HER will occur in the CoSe2 atomic layers with Mn incorporated into the primitive lattice, which is visually verified by HRTEM. Synergistically, the density functional theory simulation results reveal that the Mn incorporation lowers the kinetic energy barrier by promoting H-H bond formation on two adjacently adsorbed H atoms, benefiting H2 gas evolution. As a result, the Mn-doped CoSe2 ultrathin nanosheets possess useful HER properties with a low overpotential of 174 mV, an unexpectedly small Tafel slope of 36 mV/dec, and a larger exchange current density of 68.3 μA cm(-2). Moreover, the original concept of coordinated regulation presented in this work can broaden horizons and provide new dimensions in the design of newly highly efficient catalysts for hydrogen evolution.

Ultrathin Co3S4 Nanosheets that Synergistically Engineer Spin States and Exposed Polyhedra that Promote Water Oxidation under Neutral Conditions

Development of efficient and affordable electrocatalysts in neutral solutions is paramount importance for the renewable energy. Herein, we report that the oxygen evolution reaction (OER) performance of Co3 S4 under neutral conditions can be enhanced by exposed octahedral planes and self-adapted spin states in atomically thin nanosheets. A HAADF image clearly confirmed that the active octahedra with Jahn-Teller distortions were exposed exclusively. Most importantly, in the atomically thin nanosheets, the spin states of Co(3+) in the octahedral self-adapt from low-spin to high-spin states. As a result, the synergistic effect endow the Co3 S4 nanosheets with superior OER performance, with exceptional low onset overpotentials of circa 0.31 V in neutral solutions, which is state-of-the-art among inorganic non-noble metal compounds.

Superionic Phase Transition in Silver Chalcogenide Nanocrystals Realizing Optimized Thermoelectric Performance

Thermoelectric has long been recognized as a potentially transformative energy conversion technology due to its ability to convert heat directly into electricity. However, how to optimize the three interdependent thermoelectric parameters (i.e., electrical conductivity σ, Seebeck coefficient S, and thermal conductivity κ) for improving thermoelectric properties is still challenging. Here, we put forward for the first time the semiconductor-superionic conductor phase transition as a new and effective way to selectively optimize the thermoelectric power factor based on the modulation of the electric transport property across the phase transition. Ultra low value of thermal conductivity was successfully retained over the whole investigated temperature range through the reduction of grain size. As a result, taking monodisperse Ag(2)Se nanocrystals for an example, the maximized ZT value can be achieved around the temperature of phase transition. Furthermore, along with the effective scattering of short-wavelength phonons by atomic defects created by alloying, the alloyed ternary silver chalcogenide compounds, monodisperse Ag(4)SeS nanocrystals, show better ZT value around phase transition temperature, which is cooperatively contributed by superionic phase transition and alloying at nanoscale.

High Thermoelectric and Reversible p-n-p Conduction Type Switching Integrated in Dimetal Chalcogenide

The subject of the involved phase transition in solid materials has formed not only the basis of materials technology but also the central issue of solid-state chemistry for centuries. The ability to design and control the required changes in physical properties within phase transition becomes key prerequisite for the modern functionalized materials. Herein, we have experimentally achieved the high thermoelectric performance (ZT value reaches 1.5 at 700 K) and reversible p-n-p semiconducting switching integrated in a dimetal chalcogenide, AgBiSe(2) during the continuous hexagonal-rhombohedral-cubic phase transition. The clear-cut evidences in temperature-dependent positron annihilation and Raman spectra confirmed that the p-n-p switching is derived from the bimetal atoms exchange within phase transition, whereas the full disordering of bimetal atoms after the bimetal exchange results in the high thermoelectric performance. The combination of p-n-p switching and high thermoelectric performance enables the dimetal chalcogenides perfect candidates for novel multifunctional electronic devices. The discovery of bimetal atoms exchange during the phase transition brings novel phenomena with unusual properties which definitely enrich solid-state chemistry and materials science.

Vacancy associates-rich ultrathin nanosheets for high performance and flexible nonvolatile memory device.

On the road of innovation in modern information technology, resistive switching random access memory (RRAM) has been considered to be the best potential candidate to replace the conventional Si-based technologies. In fact, the key prerequisite of high storage density and low power consumption as well as flexibility for the tangible next generation of nonvolatile memories has stimulated extensive research into RRAM. Herein, we highlight an inorganic graphene analogue, ultrathin WO3·H2O nanosheets with only 2-3 nm thickness, as a promising material to construct a high performance and flexible RRAM device. The abundant vacancy associates in the ultrathin nanosheets, revealed by the positron annihilation spectra, act not only carrier reservoir to provide carriers but also capture center to trap the actived Cu(2+) for the formation of conductive filaments, which synergistically realize the resistive switching memory with low operating voltage (+1.0 V/-1.14 V) and large resistance ON/OFF ratio (>10(5)). This ultrathin-nanosheets-based RRAM device also shows long retention time (>10(5) s), good endurance (>5000 cycles), and excellent flexibility. The finding of the existence of distinct defects in ultrathin nanosheets undoubtedly leads to an atomic level deep understanding of the underlying nature of the resistive switching behavior, which may serve as a guide to improve the performances and promote the rapid development of RRAM.

Spatial Location Engineering of Oxygen Vacancies for Optimized Photocatalytic H2 Evolution Activity

Enhanced H2 evolution efficiency is achieved via manipulating the spatial location of oxygen vacancies in niobates. The ultrathin K4 Nb6O17 nanosheets which are rich in surface oxygen vacancies show enhanced optical absorption and band gap narrowing. Meanwhile, the fast charge separation effectively reduces the probability of hole-electron recombination, enabling 20 times hydrogen evolution rate compared with the defect-free bulk counterpart.