Yishun Huang

Target-Responsive "Sweet" Hydrogel with Glucometer Readout for Portable and Quantitative Detection of Non-Glucose Targets

Portable devices with the advantages of rapid, on-site, user-friendly, and cost-effective assessment are widely applied in daily life. However, only a limited number of quantitative portable devices are commercially available, among which the personal glucose meter (PGM) is the most successful example and has been the most widely used. However, PGMs can detect only blood glucose as the unique target. Here we describe a novel design that combines a glucoamylase-trapped aptamer-cross-linked hydrogel with a PGM for portable and quantitative detection of non-glucose targets. Upon target introduction, the hydrogel collapses to release glucoamylase, which catalyzes the hydrolysis of amylose to produce a large amount of glucose for quantitative readout by the PGM. With the advantages of low cost, rapidity, portability, and ease of use, the method reported here has the potential to be used by the public for portable and quantitative detection of a wide range of non-glucose targets.

DNAzyme crosslinked hydrogel: a new platform for visual detection of metal ions

We propose the use of DNAzyme as a crosslinker of hydrogel to develop a catalytic platform for the sensing of metal ions. The DNAzyme crosslinked hydrogel can undergo gel-sol transition in response to Cu(2+) ions, which enables sensitive visual detection of Cu(2+) by observing the release of pre-trapped AuNPs.

Target-responsive DNAzyme cross-linked hydrogel for visual quantitative detection of lead

Because of the severe health risks associated with lead pollution, rapid, sensitive, and portable detection of low levels of Pb(2+) in biological and environmental samples is of great importance. In this work, a Pb(2+)-responsive hydrogel was prepared using a DNAzyme and its substrate as cross-linker for rapid, sensitive, portable, and quantitative detection of Pb(2+). Gold nanoparticles (AuNPs) were first encapsulated in the hydrogel as an indicator for colorimetric analysis. In the absence of lead, the DNAzyme is inactive, and the substrate cross-linker maintains the hydrogel in the gel form. In contrast, the presence of lead activates the DNAzyme to cleave the substrate, decreasing the cross-linking density of the hydrogel and resulting in dissolution of the hydrogel and release of AuNPs for visual detection. As low as 10 nM Pb(2+) can be detected by the naked eye. Furthermore, to realize quantitative visual detection, a volumetric bar-chart chip (V-chip) was used for quantitative readout of the hydrogel system by replacing AuNPs with gold-platinum core-shell nanoparticles (Au@PtNPs). The Au@PtNPs released from the hydrogel upon target activation can efficiently catalyze the decomposition of H2O2 to generate a large volume of O2. The gas pressure moves an ink bar in the V-chip for portable visual quantitative detection of lead with a detection limit less than 5 nM. The device was able to detect lead in digested blood with excellent accuracy. The method developed can be used for portable lead quantitation in many applications. Furthermore, the method can be further extended to portable visual quantitative detection of a variety of targets by replacing the lead-responsive DNAzyme with other DNAzymes.

A Controllable Aptamer-Based Self-Assembled DNA Dendrimer for High Affinity Targeting, Bioimaging and Drug Delivery

Targeted drug delivery is important in cancer therapy to decrease the systemic toxicity resulting from nonspecific drug distribution and to enhance drug delivery efficiency. We have developed an aptamer-based DNA dendritic nanostructure as a multifunctional vehicle for targeted cancer cell imaging and drug delivery. The multifunctional DNA dendrimer is constructed from functional Y-shaped building blocks with predesigned base-pairing hybridization including fluorophores, targeting DNA aptamers and intercalated anticancer drugs. With controllable step-by-step self-assembly, the programmable DNA dendrimer has several appealing features, including facile modular design, excellent biostability and biocompatibility, high selectivity, strong binding affinity, good cell internalization efficiency, and high drug loading capacity. Due to the unique structural features of DNA dendrimers, multiple copies of aptamers can be incorporated into each dendrimer, generating a multivalent aptamer-tethered nanostructure with enhanced binding affinity. A model chemotherapeutic anticancer drug, doxorubicin, was delivered via these aptamer-based DNA dendrimers and exerted a potent toxicity for target cancer cells (human T cell acute lymphoblastic leukemia cell line) with low side effects for the non-target cells (human Burkitt’s lymphoma cell line). This controllable aptamer-based DNA dendrimer is a promising candidate for biomedical applications.

Design and Synthesis of Target-Responsive Aptamer-Cross-linked Hydrogel for Visual Quantitative Detection of Ochratoxin A

A target-responsive aptamer-cross-linked hydrogel was designed and synthesized for portable and visual quantitative detection of the toxin Ochratoxin A (OTA), which occurs in food and beverages. The hydrogel network forms by hybridization between one designed DNA strand containing the OTA aptamer and two complementary DNA strands grafting on linear polyacrylamide chains. Upon the introduction of OTA, the aptamer binds with OTA, leading to the dissociation of the hydrogel, followed by release of the preloaded gold nanoparticles (AuNPs), which can be observed by the naked eye. To enable sensitive visual and quantitative detection, we encapsulated Au@Pt core-shell nanoparticles (Au@PtNPs) in the hydrogel to generate quantitative readout in a volumetric bar-chart chip (V-Chip). In the V-Chip, Au@PtNPs catalyzes the oxidation of H2O2 to generate O2, which induces movement of an ink bar to a concentration-dependent distance for visual quantitative readout. Furthermore, to improve the detection limit in complex real samples, we introduced an immunoaffinity column (IAC) of OTA to enrich OTA from beer. After the enrichment, as low as 1.27 nM (0.51 ppb) OTA can be detected by the V-Chip, which satisfies the test requirement (2.0 ppb) by the European Commission. The integration of a target-responsive hydrogel with portable enrichment by IAC, as well as signal amplification and quantitative readout by a simple microfluidic device, offers a new method for portable detection of food safety hazard toxin OTA.

Graphene Oxide Protected Nucleic Acid Probes for Bioanalysis and Biomedicine

Recently, the binding ability of DNA on GO and resulting nuclease resistance have attracted increasing attention, leading to new applications both in vivo and in vitro. In vivo, nucleic acids absorbed on GO can be effectively protected from enzymatic degradation and biological interference in complicated samples, making it useful for targeted delivery, gene regulation, intracellular detection and imaging with high uptake efficiencies, high intracellular stability, and very low toxicity. In vitro, the adsorption of ssDNA on GO surface and desorption of dsDNA or well-folded ssDNA from GO surface result in the protection and deprotection of DNA from nucleic digestion, respectively, which has led to target-triggered cyclic enzymatic amplification methods (CEAM) for amplified detection of analytes with sensitivity 2-3 orders of magnitude higher than that of 1:1 binding strategies. This Concept article explores some of the latest developments in this field.

Design and synthesis of target-responsive hydrogel for portable visual quantitative detection of uranium with a microfluidic distance-based readout device

Due to uraniums increasing exploitation in nuclear energy and its toxicity to human health, it is of great significance to detect uranium contamination. In particular, development of a rapid, sensitive and portable method is important for personal health care for those who frequently come into contact with uranium ore mining or who investigate leaks at nuclear power plants. The most stable form of uranium in water is uranyl ion (UO2(2+)). In this work, a UO2(2+) responsive smart hydrogel was designed and synthesized for rapid, portable, sensitive detection of UO2(2+). A UO2(2+) dependent DNAzyme complex composed of substrate strand and enzyme strand was utilized to crosslink DNA-grafted polyacrylamide chains to form a DNA hydrogel. Colorimetric analysis was achieved by encapsulating gold nanoparticles (AuNPs) in the DNAzyme-crosslinked hydrogel to indicate the concentration of UO2(2+). Without UO2(2+), the enzyme strand is not active. The presence of UO2(2+) in the sample activates the enzyme strand and triggers the cleavage of the substrate strand from the enzyme strand, thereby decreasing the density of crosslinkers and destabilizing the hydrogel, which then releases the encapsulated AuNPs. As low as 100nM UO2(2+) was visually detected by the naked eye. The target-responsive hydrogel was also demonstrated to be applicable in natural water spiked with UO2(2+). Furthermore, to avoid the visual errors caused by naked eye observation, a previously developed volumetric bar-chart chip (V-Chip) was used to quantitatively detect UO2(2+) concentrations in water by encapsulating Au-Pt nanoparticles in the hydrogel. The UO2(2+) concentrations were visually quantified from the travelling distance of ink-bar on the V-Chip. The method can be used for portable and quantitative detection of uranium in field applications without skilled operators and sophisticated instruments.

Single-molecule photon-fueled DNA nanoscissors for DNA cleavage based on the regulation of substrate binding affinity by azobenzene

A pair of single-molecule photo-responsive DNA nanoscissors for DNA cleavage based on the regulation of substrate binding affinity was designed and fabricated. Compared with other DNA nanomachines, our DNA nanoscissors have the advantages of a clean switching mechanism, as well as robust and highly reversible operation.

Target-responsive DNAzyme hydrogel for portable colorimetric detection of lanthanide(III) ions

Lanthanide elements (Ln) play an important role in industry and agriculture. As a result of the increasing consumption of lanthanides, environmental emission of Ln has become detrimental to the health of flora and fauna. Current methods for trace lanthanides detection mainly rely on sophisticated instruments. In this article, a Ln3+ dependent DNAzyme was incorporated into a hydrogel to generate Ln3+ sensitive DNAzyme hydrogel for portable colorimetric detection. The enzyme strand and its substrate strand act as crosslinker and functional unit of the hydrogel with polyacrylamide chains as the scaffold and gold nanoparticles (AuNPs) as the indicator of hydrogel stability. Any ions in the Ln3+ series can trigger the cleavage of substrate strand by activating the enzyme strand, thereby decreasing the crosslink ratio and leading to collapse of the hydrogel. The release of the encapsulated AuNPs turns the supernatant wine red. Using this colorimetric method, Ln3+ can be detected with high sensitivity, with a limit of detection (LOD) of 20 nM for Ce3+. The hydrogel responds specifically to any Ln3+ ion and works well with the spiked lake sample without the need of instruments and skilled operators. Our results suggest that the lanthanide responsive hydrogel can be used for portable and sensitive detection of Ln3+ contamination in the field.

Functional Nucleic Acids for DNA Nanotechnology

Today, DNA emerged as a fundamental and intelligent molecule to assist construction and functionalization of nanodevices in the field of nanotechnology. Besides the powerful base-pair molecular recognition property utilized to control the final structure and function of materials, the ligand-binding capability and catalytic property offered by a large number of functional nucleic acids have stimulated the enthusiasm and creativity for molecular scientists from various disciplines to construct more intelligent DNA nanostructures and nanodevices. If the double helix is the core of DNA nanotechnology, functional nucleic acids are the active surfaces which take the role of interacting with peripheral environments. In this chapter, concept and basic property of functional nucleic acids are introduced, followed by a review of the application of functional nucleic acids in DNA nanotechnology.