Yonghui Wu

Bionic Multisilicon Copolymers Used As Novel Cross-Linking Agents for Preparing Anion Exchange Hybrid Membranes

Bionic multisilicon copolymers have long-main chains and many branched chains, and contain multifunctional groups of -N(+)(CH(3))(3)Cl(-) and -Si(OCH(3))(3), which are similar to the stem, branch, fruit, and acetabula of a vine from bionic aspect, respectively. They have high flexibility, charge density, and cross-linking ability and thus can be used as novel cross-linking agents for preparing anion-exchange hybrid membranes. High content of -Si(OCH(3))(3) groups (68-78%) is suitable to enhance membrane stabilities. The membranes are stable in 65 °C water up to 120 h and can keep integrity in 2 mol/L NaOH for 192 h. High content of -N(+)(CH(3))(3)Cl(-) groups (42-55%) is suitable to enhance membrane electrical properties. The membranes have low membrane resistance (R(m), 0.59-0.94 Ω cm(2)) and high diffusion dialysis performance. The acid (H(+)) dialysis coefficients (U(H)) are in the range of 0.007-0.075 m h(-1) at room temperature and 0.015-0.115 m h(-1) at 40 °C. The separation factor (S(H/Fe)) can reach up to 43 at room temerature and 49 at 40 °C. All of the membranes are highly homogeneous, mechanically stable (21-31 MPa, 25-147%), and thermally stable (227-275 °C for halide form membranes, and 157-172 °C for OH(-) form membranes). Hence, the investigation of multisilicon copolymers will give rise to a new developing field in material and membrane sciences.

Polyelectrolyte complex/PVA membranes for diffusion dialysis.

Polyelectrolyte complexes (PECs)/polyvinyl alcohol (PVA) membranes are prepared from PVA, anion exchange and cation exchange multisilicon copolymers, which contain plenty of functional groups of OH, N(+)(CH3)3/Si(OCH3)3, and SO3Na/Si(OCH3)3, respectively. The OH and Si(OCH3)3 groups can undertake sol-gel reaction to form crosslinking structure, while the N(+)(CH3)3 and SO3Na groups can be combined through electrostatic interaction. The PECs/PVA membranes exhibit improved thermal stability, swelling resistance and flexibility as compared with single anion or cation exchange hybrid membranes. The PECs/PVA membranes have the water uptakes (WR) of 25.3-70.4%, initial decomposition temperatures (IDTs) of 246-285°C, tensile strength of 23.1-33.8 MPa, and elongation at break of 3.5-13.1%. The membranes can be potentially applied for both acid and alkali recovery through diffusion dialysis (DD) process. The separation factor (S) for HCl/FeCl2 mixture can reach up to 89.9, which is about five times higher than that of commercial DF-120 membrane (18.5 at 25°C). The dialysis coefficients of NaOH (UOH) are in the range of 0.014-0.019 m/h, around 7-9 times higher than the value of commercial SPPO membrane (0.002 m/h at 25°C). The membranes also show potential usefulness for industrial acidic and alkali wastes treatment.

Alkali recovery using PVA/SiO2 cation exchange membranes with different -COOH contents.

By changing -COOH content in poly(acrylic acid-co-methacryloxypropyl trimethoxy silane (poly(AA-co-γ-MPS)), a series of PVA/SiO(2) cation exchange membranes are prepared from sol-gel process of poly(AA-co-γ-MPS) in presence of poly(vinyl alcohol) (PVA). The membranes have the initial decomposition temperature (IDT) values of 236-274 °C. The tensile strength (TS) ranges from 17.4 MPa to 44.4 MPa. The dimensional stability in length (DS-length) is in the range of 10%-25%, and the DS-area is in the range of 21%-56% in 65 °C water. The water content (W(R)) ranges from 61.2% to 81.7%, the ion exchange capacity (IEC) ranges from 1.69 mmol/g to 1.90 mmol/g. Effects of -COOH content on diffusion dialysis (DD) performance also are investigated for their potential applications. The membranes are tested for recovering NaOH from the mixture of NaOH/Na(2)WO(4) at 25 - 45 °C. The dialysis coefficients of NaOH (U(OH)) are in the range of 0.006-0.032 m/h, which are higher than those of the previous membranes (U(OH): 0.0015 m/h, at 25 °C). The selectivity (S) can reach up to 36.2. The DD performances have been correlated with the membrane structure, especially the continuous arrangement of -COOH in poly(AA-co-γ-MPS) chain.

Mechanism of protection of bystander cells by exogenous carbon monoxide: Impaired response to damage signal of radiation-induced bystander effect

A protective effect of exogenous carbon monoxide (CO), generated by CO releasing molecule ticarbonyldichlororuthenium (II) dimer (CORM-2), on the bystander cells from the toxicity of radiation-induced bystander effect (RIBE) was revealed in our previous study. In the present work, a possible mechanism of this CO effect was investigated. The results from medium transfer experiments showed that α-particle irradiated Chinese hamster ovary (CHO) cells would release nitric oxide (NO), which was detected with specific NO fluorescence probe, to induce p53 binding protein 1 (BP1) formation in the cell population receiving the medium, and the release peak was found to be at 1h post irradiation. Treating the irradiated or bystander cells separately with CO (CORM-2) demonstrated that CO was effective in the bystander cells but not the irradiated cells. Measurements of NO production and release with a specific NO fluorescence probe also showed that CO treatment did not affect the production and release of NO by irradiated cells. Protection of CO on cells to peroxynitrite, an oxidizing free radical from NO, suggested that CO might protect bystander cells via impaired response of bystander cells to NO, a RIBE signal in our research system.

Preparation of cation-exchange hybrid membranes with multi-functional groups and their performance on alkali recovery

AbstractCation-exchange hybrid membranes have been prepared via the blending of sulfonated poly(2,6-dimethyl-1,4-phenylene oxide) (SPPO) with poly(vinyl alcohol) (PVA), which is cross-linked with multisilicon copolymer of poly(acrylic acid-co-γ-methacryloxypropyl trimethoxy silane) (poly(AA-co-γ-MPS)). The SPPO phase, PVA phase, and multisilicon copolymer can provide the membranes with functional groups of –SO3Na, –OH and –COOH, respectively. Hence, multi-functional groups are formed within the hybrid membranes. The hybrid membranes have a short-term thermal stability of 234–260°C, tensile strength (TS) of 12–13 MPa, and elongation at break of 27–49%. Membrane stability in alkaline solution is much affected by the content of SPPO. The membranes are potentially applied in diffusion dialysis (DD) for alkali recovery (NaOH/Na2WO4). The dialysis coefficients of NaOH (UOH) are in the range of 0.0075–0.032 m/h, which are higher than those of commercial membranes and reported membranes. The separation factor can...