Youlin Shao

The Study on Pyrolytic Carbon Powder in the Coating Process of Fuel Particle for High-Temperature Gas-Cooled Reactor

The R&D of coating process of fuel particles is one of the most important key technologies in the research work of high-temperature gas-cooled reactor (HTGR). A safe and reliable coating process is expected and related to the prospect of large-scale utilization of nuclear energy. The related research of the carbon black powder which is the main byproduct generated in the coating process is important, because it relates to the impact of coating process on the surrounding environment and is also helpful to understand the deposit mechanism of PyC (pyrolytic carbon) layer coated on the fuel particle. In the present study, the microstructure of the pyrolytic carbon powder were systematically investigated by scanning electron microscope (SEM), transmission electron microscopy (TEM), laser Raman spectroscopy and particle size analysis (PSA). It can be found that the carbon powder in the cyclone separator is composed of the nano-spherical particles with the diameter of about 50nm. The ring-layered nano-structured carbon particles could be found from the electron micrographs. The comparison between Raman spectra of carbon powder and pyrolytic carbon coated on the fuel particle showed that the droplet deposit mechanism was suitable to explain the PyC deposition process. The nano-particles agglomerate into the irregular floc and the diameters of the stable particle clusters are mainly 1 μm and 10 μm. The disposal methods of carbon black powder are also discussed.Copyright

DEM simulation of particle mixing for optimizing the overcoating drum in HTR fuel fabrication

The rotating drum was used for overcoating coated fuel particles in HTR fuel fabrication process. All the coated particles should be adhered to equal amount of graphite powder, which means that the particle should be mixed quickly in both radial and axial directions. This paper investigated the particle flow dynamics and mixing behavior in different regimes using the discrete element method (DEM). By varying the rotation speed, different flow regimes such as slumping, rolling, cascading, cataracting, centrifuging were produced. The mixing entropy based on radial and axial grid was introduced to describe the radial and axial mixing behaviors. From simulation results, it was found that the radial mixing can be achieved in the cascading regime more quickly than the slumping, rolling and centrifuging regimes, but the traditional rotating drum without internal components can not achieve the requirements of axial mixing and should be improved. Three different structures of internal components are proposed and s...