Youngdong Yoo

Single nanowire on a film as an efficient SERS-active platform.

Fabricating well-defined and highly reproducible platforms for surface-enhanced Raman scattering (SERS) is very important in developing practical SERS sensors. We report a novel SERS platform composed of a single metallic nanowire (NW) on a metallic film. Optical excitation of this novel sandwich nanostructure provides a line of SERS hot spots (a SERS hot line) at the gap between the NW and the film. This single nanowire on a film (SNOF) architecture can be easily fabricated, and the position of hot spots can be conveniently located in situ by using an optical microscope during the SERS measurement. We show that high-quality SERS spectra from benzenethiol, brilliant cresyl blue, and single-stranded DNA can be obtained on a SNOF with reliable reproducibility, good time stability, and excellent sensitivity, and thus, SNOFs can potentially be employed as effective SERS sensors for label-free biomolecule detection. We also report detailed studies of polarization- and material-dependent SERS enhancement of the SNOF structure.

Superplastic Deformation of Defect-Free Au Nanowires via Coherent Twin Propagation

We report that defect-free Au nanowires show superplasticity on tensile deformation. Evidences from high-resolution electron microscopes indicated that the plastic deformation proceeds layer-by-layer in an atomically coherent fashion to a long distance. Furthermore, the stress-strain curve provides full interpretation of the deformation. After initial superelastic deformation, the nanowire shows superplastic deformation induced by coherent twin propagation, completely reorientating the crystal from <110> to <100>. Uniquely well-disciplined and long-propagating atomic movements deduced here are ascribed to the superb crystallinity as well as the radial confinement of the Au nanowires.

Steering Epitaxial Alignment of Au, Pd, and AuPd Nanowire Arrays by Atom Flux Change

We have synthesized epitaxial Au, Pd, and AuPd nanowire arrays in vertical or horizontal alignment on a c-cut sapphire substrate. We show that the vertical and horizontal nanowire arrays grow from half-octahedral seeds by the correlations of the geometry and orientation of seed crystals with those of as-grown nanowires. The alignment of nanowires can be steered by changing the atom flux. At low atom deposition flux vertical nanowires grow, while at high atom flux horizontal nanowires grow. Similar vertical/horizontal epitaxial growth is also demonstrated on SrTiO(3) substrates. This orientation-steering mechanism is visualized by molecular dynamics simulations.

Seed Crystal Homogeneity Controls Lateral and Vertical Heteroepitaxy of Monolayer MoS2 and WS2.

Heteroepitaxy between transition-metal dichalcogenide (TMDC) monolayers can fabricate atomically thin semiconductor heterojunctions without interfacial contamination, which are essential for next-generation electronics and optoelectronics. Here we report a controllable two-step chemical vapor deposition (CVD) process for lateral and vertical heteroepitaxy between monolayer WS2 and MoS2 on a c-cut sapphire substrate. Lateral and vertical heteroepitaxy can be selectively achieved by carefully controlling the growth of MoS2 monolayers that are used as two-dimensional (2D) seed crystals. Using hydrogen as a carrier gas, we synthesize ultraclean MoS2 monolayers, which enable lateral heteroepitaxial growth of monolayer WS2 from the MoS2 edges to create atomically coherent and sharp in-plane WS2/MoS2 heterojunctions. When no hydrogen is used, we obtain MoS2 monolayers decorated with small particles along the edges, inducing vertical heteroepitaxial growth of monolayer WS2 on top of the MoS2 to form vertical WS2/MoS2 heterojunctions. Our lateral and vertical atomic layer heteroepitaxy steered by seed defect engineering opens up a new route toward atomically controlled fabrication of 2D heterojunction architectures.

Origin of Size Dependency in Coherent-Twin-Propagation-Mediated Tensile Deformation of Noble Metal Nanowires

Researchers have recently discovered ultrastrong and ductile behavior of Au nanowires (NWs) through long-ranged coherent-twin-propagation. An elusive but fundamentally important question arises whether the size and surface effects impact the twin propagation behavior with a decreasing diameter. In this work, we demonstrate size-dependent strength behavior of ultrastrong and ductile metallic NWs. For Au, Pd, and AuPd NWs, high ductility of about 50% is observed through coherent twin propagation, which occurs by a concurrent reorientation of the bounding surfaces from {111} to {100}. Importantly, the ductility is not reduced with an increase in strength, while the twin propagation stress dramatically increases with decreasing NW diameter from 250 to 40 nm. Furthermore, we find that the power-law exponent describing the twin propagation stress is fundamentally different from the exponent describing the size-dependence of the yield strength. Specifically, the inverse diameter-dependence of the twin propagation stress is directly attributed to surface reorientation, which can be captured by a surface energy differential model. Our work further highlights the fundamental role that surface reorientations play in enhancing the size-dependent mechanical behavior and properties of metal NWs that imply the feasibility of high efficiency mechanical energy storage devices suggested before.

Single Crystalline β-Ag2Te Nanowire as a New Topological Insulator

A recent theoretical study suggested that Ag(2)Te is a topological insulator with a highly anisotropic Dirac cone. Novel physics in the topological insulators with an anisotropic Dirac cone is anticipated due to the violation of rotational invariance. From magnetoresistance (MR) measurements of Ag(2)Te nanowires (NWs), we have observed Aharanov-Bohm (AB) oscillation, which is attributed to the quantum interference of electron phase around the perimeter of the NW. Angle and temperature dependences of the AB oscillation indicate the existence of conducting surface states in the NWs, confirming that Ag(2)Te is a topological insulator. For Ag(2)Te nanoplates (NPLs), we have observed high carrier mobility exceeding 22,000 cm(2)/(V s) and pronounced Shubnikov-de Haas (SdH) oscillation. From the SdH oscillation, we have obtained Fermi state parameters of the Ag(2)Te NPLs, which can provide valuable information on Ag(2)Te. Understanding the basic physics of the topological insulator with an anisotropic Dirac cone could lead to new applications in nanoelectronics and spintronics.

Subcellular Neural Probes from Single-Crystal Gold Nanowires

Size reduction of neural electrodes is essential for improving the functionality of neuroprosthetic devices, developing potent therapies for neurological and neurodegenerative diseases, and long-term brain–computer interfaces. Typical neural electrodes are micromanufactured devices with dimensions ranging from tens to hundreds of micrometers. Their further miniaturization is necessary to reduce local tissue damage and chronic immunological reactions of the brain. Here we report the neural electrode with subcellular dimensions based on single-crystalline gold nanowires (NWs) with a diameter of ∼100 nm. Unique mechanical and electrical properties of defect-free gold NWs enabled their implantation and recording of single neuron-activities in a live mouse brain despite a ∼50× reduction of the size compared to the closest analogues. Reduction of electrode dimensions enabled recording of neural activity with improved spatial resolution and differentiation of brain activity in response to different social situations for mice. The successful localization of the epileptic seizure center was also achieved using a multielectrode probe as a demonstration of the diagnostics potential of NW electrodes. This study demonstrated the realism of single-neuron recording using subcellular-sized electrodes that may be considered a pivotal point for use in diverse studies of chronic brain diseases.

Pattern-selective epitaxial growth of twin-free Pd nanowires from supported nanocrystal seeds.

We report that twin-free single-crystalline Pd nanowire (NW) arrays grow epitaxially in a selected pattern on a substrate. Parallel aligned Pd NWs are synthesized on a SrTiO(3) (110) substrate in a very high density. On a SrTiO(3) (001) substrate, Pd NWs grow horizontally in two perpendicular directions. Vertical Pd NWs are synthesized instead of horizontal NWs when a c-cut sapphire substrate is employed. We reveal that the atomic structure of the substrate surface determines the geometry and orientation of seeds, which in turn direct the growth patterns of the NWs. The interface energy between the NW material and the substrate is also critical in determining the NW growth pattern. Polarization-dependent localized surface plasmon resonance of as-synthesized epitaxial Pd NW arrays is investigated for application as a plasmonic platform.

Epitaxially aligned cuprous oxide nanowires for all-oxide, single-wire solar cells

As a p-type semiconducting oxide that can absorb visible light, cuprous oxide (Cu2O) is an attractive material for solar energy conversion. This work introduces a high-temperature, vapor-phase synthesis that produces faceted Cu2O nanowires that grow epitaxially along the surface of a lattice-matched, single-crystal MgO substrate. Individual wires were then fabricated into single-wire, all-oxide diodes and solar cells using low-temperature atomic layer deposition (ALD) of TiO2 and ZnO films to form the heterojunction. The performance of devices made from pristine Cu2O wires and chlorine-exposed Cu2O wires was investigated under one-sun and laser illumination. These faceted wires allow the fabrication of well-controlled heterojunctions that can be used to investigate the interfacial properties of all-oxide solar cells.

In situ TEM observation of heterogeneous phase transition of a constrained single-crystalline Ag2Te nanowire

Laterally epitaxial single crystalline Ag2Te nanowires (NWs) are synthesized on sapphire substrates by the vapor transport method. We observed the phase transitions of these Ag2Te NWs via in situ transmission electron microscopy (TEM) after covering them with Pt layers. The constrained NW shows phase transition from monoclinic to a body-centered cubic (bcc) structure near the interfaces, which is ascribed to the thermal stress caused by differences in the thermal expansion coefficients. Furthermore, we observed the nucleation and growth of bcc phase penetrating into the face-centered cubic matrix at 200 °C by high-resolution TEM in real time. Our results would provide valuable insight into how compressive stresses imposed by overlayers affect behaviors of nanodevices.