Yu-Hsun Chou

Ultrastrong Mode Confinement in ZnO Surface Plasmon Nanolasers

Nanolasers with an ultracompact footprint can provide high-intensity coherent light, which can be potentially applied to high-capacity signal processing, biosensing, and subwavelength imaging. Among various nanolasers, those with cavities surrounded by metals have been shown to have superior light emission properties because of the surface plasmon effect that provides enhanced field confinement capability and enables exotic light-matter interaction. In this study, we demonstrated a robust ultraviolet ZnO nanolaser that can operate at room temperature by using silver to dramatically shrink the mode volume. The nanolaser shows several distinct features including an extremely small mode volume, a large Purcell factor, and a slow group velocity, which ensures strong interaction with the exciton in the nanowire.

Lasing behaviors upon phase transition in solution-processed perovskite thin films

In this paper, the temperature dependent lasing characteristics of solution-processed organic-inorganic halide perovskite CH3NH3PbI3 films have been demonstrated. The lasing temperature can be sustained up to a near room temperature at 260 K. Via the temperature dependent photoluminescence (PL) measurements, an emerged phase-transition band can be observed, ascribing to the crystalline structures changed from the orthorhombic to tetragonal phase states in the perovskites as a function of a gradual increase in the ambient temperature. The optical characteristics of the PL emission peaks and the anomalous shifts of the peak intensities are highly correspondent with the phase states in perovskites at different temperatures, showing a low-threshold lasing behavior at the phase transition. The laser cavities may be formed under multiple random scattering provided by the polycrystalline grain boundary and/or phase separation upon the phase transition. Since the threshold gain is potentially high in the random c...

High-Operation-Temperature Plasmonic Nanolasers on Single-Crystalline Aluminum

The recent development of plasmonics has overcome the optical diffraction limit and fostered the development of several important components including nanolasers, low-operation-power modulators, and high-speed detectors. In particular, the advent of surface-plasmon-polariton (SPP) nanolasers has enabled the development of coherent emitters approaching the nanoscale. SPP nanolasers widely adopted metal-insulator-semiconductor structures because the presence of an insulator can prevent large metal loss. However, the insulator is not necessary if permittivity combination of laser structures is properly designed. Here, we experimentally demonstrate a SPP nanolaser with a ZnO nanowire on the as-grown single-crystalline aluminum. The average lasing threshold of this simple structure is 20 MW/cm(2), which is four-times lower than that of structures with additional insulator layers. Furthermore, single-mode laser operation can be sustained at temperatures up to 353 K. Our study represents a major step toward the practical realization of SPP nanolasers.

Single-crystalline aluminum film for ultraviolet plasmonic nanolasers

Significant advances have been made in the development of plasmonic devices in the past decade. Plasmonic nanolasers, which display interesting properties, have come to play an important role in biomedicine, chemical sensors, information technology, and optical integrated circuits. However, nanoscale plasmonic devices, particularly those operating in the ultraviolet regime, are extremely sensitive to the metal and interface quality. Thus, these factors have a significant bearing on the development of ultraviolet plasmonic devices. Here, by addressing these material-related issues, we demonstrate a low-threshold, high-characteristic-temperature metal-oxide-semiconductor ZnO nanolaser that operates at room temperature. The template for the ZnO nanowires consists of a flat single-crystalline Al film grown by molecular beam epitaxy and an ultrasmooth Al2O3 spacer layer synthesized by atomic layer deposition. By effectively reducing the surface plasmon scattering and metal intrinsic absorption losses, the high-quality metal film and the sharp interfaces formed between the layers boost the device performance. This work should pave the way for the use of ultraviolet plasmonic nanolasers and related devices in a wider range of applications.

Surface roughness effects on aluminium-based ultraviolet plasmonic nanolasers

We systematically investigate the effects of surface roughness on the characteristics of ultraviolet zinc oxide plasmonic nanolasers fabricated on aluminium films with two different degrees of surface roughness. We demonstrate that the effective dielectric functions of aluminium interfaces with distinct roughness can be analysed from reflectivity measurements. By considering the scattering losses, including Rayleigh scattering, electron scattering, and grain boundary scattering, we adopt the modified Drude-Lorentz model to describe the scattering effect caused by surface roughness and obtain the effective dielectric functions of different Al samples. The sample with higher surface roughness induces more electron scattering and light scattering for SPP modes, leading to a higher threshold gain for the plasmonic nanolaser. By considering the pumping efficiency, our theoretical analysis shows that diminishing the detrimental optical losses caused by the roughness of the metallic interface could effectively lower (~33.1%) the pumping threshold of the plasmonic nanolasers, which is consistent with the experimental results.

Manipulation of exciton and photon lasing in a membrane-type ZnO microcavity

We report on the fabrication and characterization of a membrane-type ZnO microcavity (MC). The ZnO membrane was cut from a single crystalline ZnO substrate by using focused ion beam milling, and was then placed onto a SiO2 substrate by using glass microtweezers. Through changing the pumping regime, manipulation of P-band exciton lasing and whispering-gallery mode (WGM) photon lasing could be easily achieved. P-band exciton lasing was observed only when the pumping laser was focused at the center of the ZnO MC with a small pumping size because of the innate ring-shaped WGM distribution. Furthermore, the lasing threshold of the ZnO MC could be reduced to an order lower by using a larger pumping spot because of the more favorable spatial overlap between the optical gain and WGM.

Crossover from polariton lasing to exciton lasing in a strongly coupled ZnO microcavity

Unlike conventional photon lasing, in which the threshold is limited by the population inversion of the electron-hole plasma, the exciton lasing generated by exciton-exciton scattering and the polariton lasing generated by dynamical condensates have received considerable attention in recent years because of the sub-Mott density and low-threshold operation. This paper presents a novel approach to generate both exciton and polariton lasing in a strongly coupled microcavity (MC) and determine the critical driving requirements for simultaneously triggering these two lasing operation in temperature <140 K and large negative polariton-exciton offset (<−133 meV) conditions. In addition, the corresponding lasing behaviors, such as threshold energy, linewidth, phase diagram, and angular dispersion are verified. The results afford a basis from which to understand the complicated lasing mechanisms in strongly coupled MCs and verify a new method with which to trigger dual laser emission based on exciton and polariton.

Localized surface plasmon for enhanced lasing performance in solution-processed perovskites.

A promising method to promote the lasing performance of solution-processed organic-inorganic lead-halide perovskites has been demonstrated. With the adding Ag and PMMA thin films, the threshold excitation power for low-temperature lasing action in perovskites can be greatly reduced by over two orders of magnitude than that acquired in bare perovskite layers, ascribing to the strong exciton-plasmon coupling between the Ag and perovskite films. Also, the PMMA layer can be exploited to prevent the perovskite degradation from the hydrolysis in ambient environment, achieving long-lasting light-emitting performance. The advantages exhibited by the hybrid perovskite configuration would be very promising in making practical laser devices.

Controllable lasing performance in solution-processed organic–inorganic hybrid perovskites

Solution-processed organic-inorganic perovskites are fascinating due to their remarkable photo-conversion efficiency and great potential in the cost-effective, versatile and large-scale manufacturing of optoelectronic devices. In this paper, we demonstrate that the perovskite nanocrystal sizes can be simply controlled by manipulating the precursor solution concentrations in a two-step sequential deposition process, thus achieving the feasible tunability of excitonic properties and lasing performance in hybrid metal-halide perovskites. The lasing threshold is at around 230 μJ cm-2 in this solution-processed organic-inorganic lead-halide material, which is comparable to the colloidal quantum dot lasers. The efficient stimulated emission originates from the multiple random scattering provided by the micro-meter scale rugged morphology and polycrystalline grain boundaries. Thus the excitonic properties in perovskites exhibit high correlation with the formed morphology of the perovskite nanocrystals. Compared to the conventional lasers normally serving as a coherent light source, the perovskite random lasers are promising in making low-cost thin-film lasing devices for flexible and speckle-free imaging applications.

Realization of UV Plasmonic Nanolasers With Extremely Small Mode Volume

It is difficult to operate plasmonic nanolasers on silver films in the ultraviolet regime owing to the bending-back effect of surface plasmon dispersion. In this paper, we report on plasmonic lasers comprised of a ZnO nanowire lying on a single-crystalline silver film with a SiO2 spacer layer. The silver can strongly shrink the mode volume, thereby boosting the Purcell factor. Meanwhile, the SiO2 spacer thickness is optimized to adjust the surface plasmon dispersion curve so that the lasing wavelength can be located at a large dispersion region, thereby achieving a large group index of 55, an ultra-small effective mode volume of 3.5 × 10-3 λ3, and low-threshold of 11 MW/cm2.