Yuan-Jui Kuo
National Sun Yat-sen University
Network
Latest external collaboration on country level. Dive into details by clicking on the dots.
Publication
Featured researches published by Yuan-Jui Kuo.
Applied Physics Letters | 2011
Chih-Hao Dai; Ting-Chang Chang; Ann-Kuo Chu; Yuan-Jui Kuo; Szu-Han Ho; Tien-Yu Hsieh; Wen-Hung Lo; Ching-En Chen; Jou-Miao Shih; Wan-Lin Chung; Bai-Shan Dai; Hua-Mao Chen; Guangrui Xia; Osbert Cheng; Cheng Tung Huang
This paper investigates the channel hot carrier stress (CHCS) effects on gate-induced drain leakage (GIDL) current in high-k/metal-gate n-type metal-oxide-semiconductor field effect transistors. It was found that the behavior of GIDL current during CHCS is dependent upon the interfacial layer (IL) oxide thickness of high-k/metal-gate stacks. For a thinner IL, the GIDL current gradually decreases during CHCS, a result contrary to that found in a device with thicker IL. Based on the variation of GIDL current at different stress conditions, the trap-assisted band-to-band hole injection model is proposed to explain the different behavior of GIDL current for different IL thicknesses.
IEEE Electron Device Letters | 2010
Chih-Hao Dai; Ting-Chang Chang; Ann-Kuo Chu; Yuan-Jui Kuo; Shih-Ching Chen; Chih-Chung Tsai; Szu-Han Ho; Wen-Hung Lo; Guangrui Xia; Osbert Cheng; Cheng Tung Huang
This letter systematically investigates the mechanism of gate-induced floating-body effect (GIFBE) in advanced partially depleted silicon-on-insulator metal-oxide-semiconductor field-effect transistors. Based on different operation conditions, we found that the hole current collected by the body terminal is strongly dependent on electrons in the inversion layer under a source/drain ground. This implies that GIFBE can be attributed to anode hole injection (AHI) rather than the widely accepted mechanism of electron valence band tunneling. Moreover, GIFBE was also analyzed as a function of temperature. The results provide further evidence that the accumulation of holes in the body results from the AHI-induced direct tunneling current from the gate.
IEEE Electron Device Letters | 2011
Chih-Hao Dai; Ting-Chang Chang; An-Kuo Chu; Yuan-Jui Kuo; Fu-Yen Jian; Wen-Hung Lo; Szu-Han Ho; Ching-En Chen; Wan-Lin Chung; Jou-Miao Shih; Guangrui Xia; Osbert Cheng; Cheng-Tung Huang
This letter systematically investigates the origin of gate-induced floating-body effect (GIFBE) in partially depleted silicon-on-insulator p-type MOSFETs. The experimental results indicate that GIFBE causes a reduction in the electrical oxide field, leading to an underestimate of negative-bias temperature instability degradation. This can be partially attributed to the electrons tunneling from the process-induced partial n+ polygate. However, based on different operation conditions, we found that the dominant origin of electrons was strongly dependent on holes in the inversion layer under source/drain grounding. This suggests that the mechanism of GIFBE at higher voltages is dominated by the proposed anode electron injection model, rather than the electron valence band tunneling widely accepted as the mechanism for n-MOSFETs.
IEEE Electron Device Letters | 2011
Chia-Sheng Lin; Ying-Chung Chen; Ting-Chang Chang; Fu-Yen Jian; Wei-Che Hsu; Yuan-Jui Kuo; Chih-Hao Dai; Te-Chih Chen; Wen-Hung Lo; Tien-Yu Hsieh; Jou-Miao Shih
This letter investigates the negative-bias temperature instability (NBTI) degradation of p-channel low-temperature polycrystalline-silicon thin-film transistors (LTPS TFTs) under mechanical tensile stress. Experimental results reveal that the interface state density Nit and grain boundary trap density Ntrap of tensile-strained LTPS TFTs are more pronounced than those of unstrained LTPS TFTs. Extracted density of states and conduction activation energy Ea both show increases due to the strained Si-Si bonds, which implies that strained Si-Si bonds are able to react with dissociated H during NBTI stress. Therefore, NBTI degradation is more significant after tensile strain than in an unstrained condition.
Solid-state Electronics | 2010
S.W. Tsao; Ting-Chang Chang; Shin-Ping Huang; Min Chen Chen; S.C. Chen; Chih-Tsung Tsai; Yuan-Jui Kuo; Ying-Chung Chen; W.C. Wu
Surface & Coatings Technology | 2010
Chih-Hao Dai; Ting-Chang Chang; Ann-Kuo Chu; Yuan-Jui Kuo; Shih-Ching Chen; Chih-Tsung Tsai; Wen-Hung Lo; Szu-Han Ho; Guangrui Xia; Osbert Cheng; Cheng Tung Huang
Thin Solid Films | 2009
Yuan-Jui Kuo; Ting-Chang Chang; P. H. Yeh; S.C. Chen; Chih-Hao Dai; C.H. Chao; Tai-Fa Young; Osbert Cheng; Cheng-Tung Huang
Thin Solid Films | 2011
Chih-Hao Dai; Ting-Chang Chang; Ann-Kuo Chu; Yuan-Jui Kuo; Ya-Chi Hung; Wen-Hung Lo; Szu-Han Ho; Ching-En Chen; Jou-Miao Shih; Wan-Lin Chung; Hua-Mao Chen; Bai-Shan Dai; Tsung-Ming Tsai; Guangrui Xia; Osbert Cheng; Cheng Tung Huang
Electrochemical and Solid State Letters | 2009
Yuan-Jui Kuo; Ting-Chang Chang; Chin-Hao Dai; Shih-Ching Chen; Jin Lu; Sz-Han Ho; Chien-Hsiang Chao; Tai-Fa Young; Osbert Cheng; Cheng-Tung Huang
Electrochemical and Solid State Letters | 2012
Chih-Hao Dai; Ting-Chang Chang; Ann-Kuo Chu; Yuan-Jui Kuo; Szu-Han Ho; Tien-Yu Hsieh; Wen-Hung Lo; Ching-En Chen; Jou-Miao Shih; Wan-Lin Chung; Bai-Shan Dai; Hua-Mao Chen; Guangrui Xia; Osbert Cheng; Cheng Tung Huang